similar to: Versatel PRA in Belgium/Netherlands

Hi My System is: Asterisk 1.6 running on a Dell Server with two network interfaces. eth1 (IP 10.26.208.252) is connected to a versatel sip-router tha has the local ip 10.26.208.252 and the external ip 89.244.x.y eth0 of the server is configured to 10.26.192.107 The Problem: SIP registration works, phone rings in- and outbound, but there is no audio, nor the caller neither the callee can hear

Hello, and please forgive the OT question. I'm just becoming desperate. I need two ISDN 30 circuits in Amsterdam, and I can't seem to be able to get a provider. I've tried KPN and Versatel. I'm based in California. Does anyone have any recommendations? Thanks in advance, Jose.

We are located in Belgium and just ordered a PRA line, the telco asked the following questions : - 120 or 75 ohm ? - Support for CRC4 yes/no ? - B channels in 2 way ? We will buy a digium card but which one should we buy ? could anybody help me with this ? Thank you Michael Sorry for the previous html mail DISCLAIMER: The content of this e-mail message does not constitute a commitment

Hullo everyone, Iam new to Asterix but am trying to get R2 signalling working with a Digium E100P E1/PRA Card. My Telecom doesn't have an implementation of ISDN PRI yet, so it's R2 that is supported. Could anyone have a patch to fix this for me. Am told it has something to do with Assembly Language programming. Please help me fix this. Regards, Nicholas

Hello, I have configured my TDM01B Card (1 FXO Port ) as follows (below) but it will not pick up an incoming call. Any suggestions/tools to see what the problem is? I have looked at zttool where this line changes but I don't understand what it means (The last digit changed from 0 to 1) Total/Conf/Act: 4/ 1/ 1 /etc/zaptel.conf fxsks=4 loadzone=nl defaultzone=nl

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

Hi guys :) I'm dealing with this problem, perhaps conceptually not that complex, but still - I'm stuck. Two columns, values 1<x<10, only integers. I want to check when the first column's index is identical to the second's (and vice versa). If that's true, I want to add a further column with value 1 (if true) or NA (if false). Thus, I obtain 100 matrices (for each

Hello, I have Samba version 3.0.24 running on a 2.6.14-gentoo-r5 x86 kernel (xeon 3ghz, 1gb ram raid 5). All clients accessing samba shares via LAN have no problems. Samba server works perfectly and fast. We are instead experiencing serious performance issues when accessing samba shares from remote clients (WAN), via VPN. Simple operations like "open a file", "copy & paste a

Hello ml, i need some help on my zaptel configuration. My E100P only shows some YELLOW / RED alarm when I load the wct1xxp module and do a cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED ... .. . My /etc/zaptel.conf is: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nl defaultzone=nl I tried zaptel-1.0RC2 and the latest CVS

Hi, I've been playing with Voicemail and Voicemail2 a bit for my users, and there are a few things I'm wondering about: - We can specify parameters to the mailbox (s, b or u) to select which prompts to play. However, if we specify 'b' or 'u' it plays that (customisable) message, but it also plays the voicemail instructions. For the dutch, it is customary that a user

Hi All, I am a java developer. I wanna learn Ruby on Rails. Can anyone suggest some good books on Ruby or some url where can I learn the basics of Ruby. Thanks, Prabhu. --------------------------------- Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2?/min or less. -------------- next part -------------- An HTML attachment was scrubbed... URL:

We are not having any luck with the E100p card here in Australia, it will work with a crossover cable to another device but will not talk to our Telco Telstra who probably have a weird implementation of an E1. Any suggestions on a replacement? Regards Mark McKibbin DCS Internet 64 Queen St Warragul Victoria 3820 Australia www.dcsi.net.au mark@team.dcsi.net.au Ph. 1300 665575 Fx. 1300 556595

Hello, I''m starting at the RR, and I''m trying to use google charts to generate some graphs in a single plugin in rails. But I''m testing the samples that are giving errors. I think it must be configuration error. Someone who has used google charts on rails help me? Since already thank you! Juliana. =================================================================

Hi, I came back from a quiet weekend today and found my E400P box to have gone astray. Asterisk is loaded from inittab, and started crashing and reloading a couple of thousands of times, each time notifying my monitoring service :-P I remember there would be issues on old cvs stuff since the crash at digium so I made a clean checkout just now. Here is what happens when I load manually:

Hi, First off, let me state that _YES, I am fully aware that what I am doing is insane, prone to major havoc and bad for general health_ :-)) Scenario: My GF needs an analog modem to use with her banking software (sodding backs don't supply a decent web-application for company use). I am experimenting to see if we can get it to work (albeit slow) trough our ATA186 talking g711 to

Sorry to bore you more with the clock issue, but have you check /proc/zaptel/<span> to make sure it's not missing interrupts? There's also an option to record the audio for the fax, you could listen to that vs a recorded file that will receive correctly on a fax machine and see whether there is an obvious difference? (Good luck, that'll be really scraping the barrel!!) Does it

toy buy my first cisco 186 but when i read this page http://www.djernes.org/~shawn/ata186.htm i cant find in my dev page some parameters just like " UseSIP " what i need to do to show this parameters Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030626/42e66005/attachment.htm

Hi, I'm having trouble configuring and E1 link , I know the E1 is a PRI and the switchtype is 5ess. The problem is that everytime I try to dial I got and error saying that it was unable to open the zap channel . Devices are created in the /dev/zap directory and I can open them with a cat /dev/zap/1. I can also see the channels in /proc/zaptel/1. Thanks in advance [zaptel.conf]

Hi what can be wrong with * that console does not show any stderr text printed from agi script? I am starting with asterisk -vvvvvvvvvvvvvvvvvvvvvvvvrc VERBOSE command does show text on console but printing of STDERR does not I tried it from Perl and from Java and in both cases almost the same result, except in Java more things do not work. In Java for, for example, SAY DIGITS 123 78# would