similar to: DHCP Attribute for TFTP server for Aastra 480i?

I have my DTA310 getting an IP via DHCP. I loaded the unlocked firmware version (Application Code Version: DTA version 1.0 US (8x8 001111)) onto it via TFTP, so I could access the SIP configuration. Under the SIP config, I put the IP of my * system, the 5060 port, and for Domain Name, I put default (is that right?). I checked off the Send Registration Request box. Dial Plan I left at the default,

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

I'm using tftp server that automatically loads on each reboot, for some reason the last 2 files fail to load each time. (and I think this has always been the case) Aborted 192.168.16.32 C:\Program Files\TFTP Desktop\1.0.5.18\cfg000b82005c24 Octet, Send 192.168.16.20 25 Jan 18:25 Error Aborted 192.168.16.32 C:\Program Files\TFTP

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

Hi all, I have bought an Aastra 480i phone. In order to configure the phone for using a TFTP server, I had to enter the TFTP ip address directly in the phone, and then reboot the phone again. Is it possible to configure a DHCP server so it sends a TFTP server coordinate for the phone to use? Best regards, Francois Random Thought: --------------- A bottle of wine begs to be shared; I have

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

Hi Folks, Looking for feedback on the cordless phones with the Aastra 480i CT handset. Is voice quality comparable to standard consumer residential 2.4GHz cordless phones in the US$30 - $50 price range, or better/worse? How about handset and speakerphone quality for the main phone? Seems like there have been various big issues with firmware in past, but is it pretty stable now? Thanks,

Having scoured the web, I still am no better off .. I have 2 Aastra480i's , and 120+ cisco 7940's :) . I am trying to decide which model to use going forward when we purchase more kit. They both seem much on a par regarding features. Q1: Is there anyway of making the cisco auto-answer _without_ having to manually edit the configuration on each phone ? I've been able to get the

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

Are there any cards that work with * that do the VoIP-to-TDM processing on the cards, with multiple interfaces? The QuickNet Internet LineJack meets the description I believe, but it only has a single FXS or FXO. Are there any cards that have more than one FXS? Thanks. __ Dana Olson Disclaimer: The information transmitted in this message is intended only for the person or entity to which it

I just bought an Aastra 480i CT for a client who needed cordless capabilities in their office. I'm trying to set up the base station and cordless handset in my office first. I'm able to connect the phone to my Asterisk box and make outgoing calls from either the base station or the handset - to extensions within my office as well as numbers outside the network. But I can't

Just found out my maintanence agreement with fonality does not cover phones over a year old. So, of course, they don't repaird phones, only replace them. Very worldly of them... Anyone know where I can get an Aastra 480i repaired? The phone works on speakerphone, but when you lift the receiver offthe hook, the phone does not engage. There is something wrong with the "hook". The

After upgrading to 1.8.3.2 today, I notice that my Aastra 480i SIP phones no longer initiate hold music when a call is placed on hold. I seem to be having the same issue as the person here: http://forums.digium.com/viewtopic.php?f=1&t=77553 Has anyone else run into this issue? -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC

Are the cordless phones on the 480i CT from Aastra registered independently in Asterisk? Such that if I have 5 of the cordless phones hooked up, each one is it's own "extension?" ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

Does anyone know if it is possible to upload a common directory to all Aastra phones (480i, 9133)? Is there someting equivalent to the way Polycom phones do it? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

I'm having problems getting my aastra 480i to register with the asterisk server. I can inititate calls from the phone, but >sip show peers does not show any IP address registered for this phone. I am probably missing something stupidly simple. Anyone have an example config to share or corrections for my configuration? Asterisk 1.2 aastra 480i CT has the 1.4 firmware <sip.conf>

But where do can you get this later firmware from? I'm still on 1.0.0.78 on my 480i. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Peter Passchier Sent: 05 August 2005 00:04 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] AASTRA 480i Firmware 1.2.0.162 SIP ALERT_INFOproblems