similar to: RedAlarm (t100p - Adtran Total Access 750)

>>TURN OFF HTML!!!!!!!!!!! >>Why the hell do you feel I need to read your text in a lightish blue >>color???????? Do you know how shitty that looks compared to everyone >>elses black on white. Blue doesn't offer the contrast my eyes prefer. So >>why the hell do you feel important enough to override my defaults? You >>sir are the annoying guest who comes in

Hello, I have just received Adtran TSU 600 with 24 FXS ports. I have installed sucessfuly T100P card. Adtran is connected to t100p with crossover T1 cable. On T100P card I have a green light and on Adtran I do not get any errors or alarms. But I do not get dialtone on FXS ports. Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran. In zaptel.conf: span=1,1,0,esf,b8zs

I have following setup Asterisk - T100P -> Adtran TSU600 P + FXOcard -> PSTN line When PSTN line is plugged directly in to analog X100P caller id is received by Asterisk but when I plug it into adtran I'm not getting caller id. Any ideas what kind of setup Adtran TSU600 requires to pass caller id to T100P ??? regards m.

Hello Can somebody send me please config files of zaptel.conf and zapata.conf for adtran fxs ports. I cannot make it work. I do not get a dial tone on Adtran and when I am trying to call from sip i get: app_dial.c:674 dial_exec: Unable to create channel of type 'Zap' == Everyone is busy at this time There are no errors on T100P and adtran. Please help! B.

Hello, So all the pieces are finally here, and I'm ready to play. I remember reading on this list that the connection Channel Bank <-> T100P requires a "reverse cable." Is this a regular Ethernet reverse cable (i.e., only a couple of pairs reversed?) Please help me before I blow something up! Saludos, Jose.

Hello, I new to this, but with the help of mailing lists archives and IRC I am able to build my PBX. Thanks to all who had help me to reach till here. I am stuck at a point where I can't find the solution on mailing lists or even on IRC. I have individual 4 DID (Direct Inward Line) coming from Telco and terminating into TA 750 to FXS card. Many of them told that Phone instrument terminates

I have a T100P card connected to an Adtran and then a T1. I have added the following configurations to Asterisk...but, when I dial 9 and then a local phone number, it bounces between the dial tone and silence and the *error* light on the Adtran blinks. zaptel.conf span=1,0,0,esf,b8zs fxsks=1-8 loadzone=us defaultzone=us zapata.conf [channels] context=from-sip signalling=fxs_ks

I've never set up an mgcp device before. I have an Adtran IAD with the MGCP firmware on it. I have it configured in mgcp.conf like this: [general] port = 2427 bindaddr = 0.0.0.0 [adtran] host = 192.168.2.2 context = default canreinvite = no line => aaln/1 line => aaln/2 The device is configured like this: MGCP Configuration | Standard MGCP 0.1 / NCS 1.0 MGCP Endpoint

I have a device on my network that is not DHCP and I dont know the IP address of it and it has not method of finding it or changing it unless you know the IP address (setable by browser). Is there a way on linux, based on MAC address, to get the IP of the unit? Thanks, Jerry

I thought this might interest a few asterisk users. I don't use them so I have no idea about Adtran's but I know a heap of people on this list swear by them. Cheers, Dean ________________________________ From: vclass.coordinator@adtran.com [mailto:vclass.coordinator_adtran.com@mail.vresp.com] Sent: Monday, 19 September 2005 9:59 AM Subject: ADTRAN Virtual Classes: Ensuring

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm

I've been working with an adtran ta 850 hooked to a t100p pretty much all day today, and I haven't gotten past configuring zaptel.conf and zapata.conf. For some reason, when I pick up analog phone hooked up to the first module of a quad fxs card in the second slot of the ta 850, asterisk thinks that all four of the fxs modules in that card are going off hook. If I pick up a phone hooked

I have some properties that I want setable externally, but readable only internally. I''ve played around with attr_writer (and attr_reader separately) but can''t figure out how to get either to work. I can do what I want using attr_accessor, or just straight out defining the prop setter method. Anybody know how to use attr_writer or attr_reader with a model? You da man, Joe

I am having a problem using the Adtran 750 FXO quad card with a Groundstart trunk line. I am able to receive calls on the trunk line, however dialing out is not working. The Adtran does not seem to be doing the signaling. Has anyone used the 750 FXO card in Groundstart mode? Any special configuration issues that I should be aware of? Syed Akbar Alico Systems Inc www.alicosystems.com Tel:

I have three quad FXS cards (in slots 1-3) and one quad FXO card in slot 4. I have a few telephone sets connected to the FXS cards, and * allows calling from one phone to another and from phone to console, etc. Diax also works. I have a CO line connected to one circuit of the the FXO card. When I dial from the console, the busy light on the FXO card comes on, but it doesn't break dial

Hi List, I have some T1 750s; hookup via a T1 to a TE420P card. We have them all set as E&M wink trunks. We get a dial tone and can call numbers, but when i call another number the ringing I hear on my phone is very weird, its not the standard ring tone. What will cause this? Is this a * setting or something in the Adtran I am fixing, I just want good ole ringing to be heard! Any help would

TC: You were right on the money. The new firmware L-34 fixed my problem with the Channel Bank. Now the lines are properly closed and not hanging up the lines. One of these days I should read more about the 750. I saw some parameters for "network on-hook/off-hook + test" that I don't even know what they do. Thank you so much. Regards, Uriel -------------- next part --------------

I have a channel bank (TA750) and a PRI with 30 channels connected to a TE405P, in the channel bank I have a extension to a fax machine, but it doesn't work to send or receive fax. There are any advice ? Kind regards, Miguel

I've been trying to get a Win 2000 RAS server working with my asterisk PBX for quite some time, to no avail. I've googled, I've tried loads of configurations, I've rewired phone lines, and still I am not winning the battle. Here's my config. PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. I have 4 Zap channels signalled FXO_KS to the 750

I'm just about to put an autosave feature into R as per requests by Peter and Kurt. My current thinking is that it should be an option so that it is setable (in the profile if you want). One simply specifies the number of commands that are executed between calls to save. It won't be incremental; I'll just dump the output of ls(). I think that the file name should not be .RData but