asterisk users - Aug 2004 - Problems dialing out with T100P and Adtran

I have a T100P card connected to an Adtran and then a T1.

I have added the following configurations to Asterisk...but, when I dial 
9 and then a local phone number, it bounces between the dial tone and 
silence and the *error* light on the Adtran blinks.

zaptel.conf

span=1,0,0,esf,b8zs
fxsks=1-8
loadzone=us
defaultzone=us


zapata.conf

[channels]
context=from-sip
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=2
txgain=2
group=1
channel => 1-7


extensions.conf

...

[from-sip]
ignorepat => 9
exten => _9NXXXXXXX,1,Dial(Zap/g1/${EXTEN:1})
exten => _91XXXNXXXXXXX,1,Dial(Zap/g1/${EXTEN:1})

; generic phone extension
exten => 1001,1,Dial(SIP/1001,20)
exten => 1001,2,VoiceMail(u1001)
exten => 1001,102,VoiceMail(b1001)
exten => 1001,103,Hangu

...

sip.conf

...

[1001]
type=friend
username=1001
fromuser=1001
callerid=User Name <1001>
host=dynamic
nat=yes
canreinvite=yes
dtmfmode=info
mailbox=1001@default
disallow=all
allow=ulaw
allow=alaw
context=from-sip
secret=1001




I am using Grandstream BT101 phones, plugged into my LAN.  I can dial 
extension/phone to extension/phone in the office just fine.  But, when I 
dial *9* to get out, nothing happens.  I don't get the dial tone back 
after I dial 9, and if I dial 9 and the number and send the call...the 
server runs through what looks like a connection to a Zap channel...I 
don't get any noticable erros...but the call never makes it out.  Once, 
I dialed the number again, while the Adtran was flashing erros and the 
dial tone was going in and out and it rang my cell phone...but then 
immediately hung up and closed out the call?

I'm new to Asterisk...any help or insight would be much appreciated.

Cheers,



-- 
Shawn Parker
Network Administrator
Cumulus Broadcasting, LLC.
Columbia-Jefferson City, Missouri
1.573.449.4141
shawn.parker@cumulus.com

Nevermind.  I was a digit off in my zaptel.conf...

the span for my adtran settings is 1,1,0,esf,b8zs instead of the one i 
have listed below.

pssssh...one digit off.

cheers,

Shawn Parker wrote:
>
> I have a T100P card connected to an Adtran and then a T1.
>
> I have added the following configurations to Asterisk...but, when I 
> dial 9 and then a local phone number, it bounces between the dial tone 
> and silence and the *error* light on the Adtran blinks.
>
> zaptel.conf
>
> span=1,0,0,esf,b8zs
> fxsks=1-8
> loadzone=us
> defaultzone=us
>
>
> zapata.conf
>
> [channels]
> context=from-sip
> signalling=fxs_ks
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=2
> txgain=2
> group=1
> channel => 1-7
>
>
> extensions.conf
>
> ...
>
> [from-sip]
> ignorepat => 9
> exten => _9NXXXXXXX,1,Dial(Zap/g1/${EXTEN:1})
> exten => _91XXXNXXXXXXX,1,Dial(Zap/g1/${EXTEN:1})
>
> ; generic phone extension
> exten => 1001,1,Dial(SIP/1001,20)
> exten => 1001,2,VoiceMail(u1001)
> exten => 1001,102,VoiceMail(b1001)
> exten => 1001,103,Hangu
>
> ...
>
> sip.conf
>
> ...
>
> [1001]
> type=friend
> username=1001
> fromuser=1001
> callerid=User Name <1001>
> host=dynamic
> nat=yes
> canreinvite=yes
> dtmfmode=info
> mailbox=1001@default
> disallow=all
> allow=ulaw
> allow=alaw
> context=from-sip
> secret=1001
>
>
>
>
> I am using Grandstream BT101 phones, plugged into my LAN.  I can dial 
> extension/phone to extension/phone in the office just fine.  But, when 
> I dial *9* to get out, nothing happens.  I don't get the dial tone 
> back after I dial 9, and if I dial 9 and the number and send the 
> call...the server runs through what looks like a connection to a Zap 
> channel...I don't get any noticable erros...but the call never makes 
> it out.  Once, I dialed the number again, while the Adtran was 
> flashing erros and the dial tone was going in and out and it rang my 
> cell phone...but then immediately hung up and closed out the call?
>
> I'm new to Asterisk...any help or insight would be much appreciated.
>
> Cheers,
>
>
>

-- 
Shawn Parker
Network Administrator
Cumulus Broadcasting, LLC.
Columbia-Jefferson City, Missouri
1.573.449.4141
shawn.parker@cumulus.com