similar to: Getting the "real" extension into CDR

Hi Folks I have had a look through the Features list, and I see that the system does support an auto attendant, however is it possible to have say 5 telephone numbers that a person would dial and have 5 different messages I.e Dial 555-1121 and you get a message for companyA call centre Dial 555-1131 and you get a message for companyB call centre Dial 555-1141 and you get a message for companyC

If I have a global variable in my dialplan and I change it, does that change immediately take affect for all calls that are active? Here is my situation. The company I work for has two office groups that share a building. The two offices are separate companies but support one another and want to be able to transfer calls as if they were all on the same phone system. Each company has 4

Can I configure Samba4 in such a way that I have two separate **forests** on a single machine? let?s say one for CompanyA and other for companyB? So essentially does Samba4 support multiple server instances like Samba3 as described here http://wiki.samba.org/index.php/Multiple_Server_Instances? If it does not yet, are there any known blockers in supporting this or it?s just a question of time

Hi List, I've got * randomly hanging up on inbound or outbound calls on zap channels. I use a Digitnetworks X100P clone card. Any idea of what might be happening? Cheers, Jean-Michel.

Hi For a customer, I am trying to setup 3 different companies on one asterisk box, and I need to assign extension 200 in three different companies. I was using different contexts, but was unable to get it to work. So, my basic question is - In Asterisk, Can we have same extension number in different contexts? For example: [Context_company_1] exten => 200,1,,,

We are in the process of testing * for company wide deployment. We are using Polycom 300 phones, the only problem that I am running into is when I call an 800 number that has an IVR I get disconnected after about 60 seconds. Here are the logs from asterisk. I am not sure if this is a problem with asterisk timing out or if it is the phone. To me this looks like asterisk is timing out.

I have a new Asterisk system going into production next week and I'm a bit stumped as to the best way to handle the Dialplans for it. The Asterisk system is replacing 4 separate PSTN lines with both SIP & PSTN inputs. The setting up of the dial plan is giving me some design headaches, which probably means I'm missing something obvious and doing this the hard way. I have separate

I've got a couple of PRIs coming in from a SUMA 4 switch with some 800 numbers routed through it. When the calls come in, I get the following message on the console and the call never makes it through: (800 number is fake) Extension '8005551212' in context 'nonauthenticated' from '232102749585' does not exist. Rejecting the call on span 4, channel 1. I do have the

I'm using Asterisk 1.0.9, a Digium TE210P dual T1 card, and two Rhino channel banks (one 12FXO/12FXS, the other 24 FXS). So it's an analog phone on the inside connected to one of the FXS ports, and PSTN line connected to one of the FXO ports. My problem is that as soon as I hear the _first_ ring when I dial out through the PSTN line, I hear a tiny echo on the phone (I estimate between

We are running our * server as a virtual PBX for 6 companies. I am having all of the Allison prompts plus our own custom IVR prompts being re-recorded for each company, in a different voice (marketing thing) with a different personality (perky, corporate, earthy) . I'm curious if someone could point out a dirty trick to get the voice to play right, for internal and external callers,

Greetings, I need if possibile an explanation on how to manage the incoming callerid for an incoming call. Let me explain the situation: We have two different companies in this office that shares the same PBX (* box). Each company have its own number for the incoming calls. What i'd like to implement is something that, depending on the incoming line that is involved in the call, plays a

How can i control the codec for the calls. For example I have 3 SIP phones registered to asterisk The firs two are in the local area network (behind nat)- I want to use g711 between them and to connect directly (canreinvite=yes) and the third is in internet - want all calls to it and from it to use g729 and media to go through asterisk. So if Phone 1 calls Phone 2 the codec to be g711, but when

HI ALL: I am newbie to IAX, my iax.conf is as follows: [general] port=5036 ..... but I donot why it doesnot listen on UDP PROT 5035, instead it listens on 4569 Asterisk CLI debug says: [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) == Manager registered action IAXpeers == Parsing '/etc/asterisk/iax.conf': Found Nov 30 11:52:12 WARNING[1076220544]:

I admit that this might be some very basic question... How do I obtain Asterisk 1.0.3 from CVS? Does '-r v1-0' get me 1.0 or 1.0.3? Thanks, Adi

When I make a call from a SIP phone to a speaking extension on *, such as one that speaks digits or similar, when I monitor * in very verbose mode I can see it running through the routine associated with the extension, but I am getting no RTP data stream back to the phone. Does the machine housing * need a sound card? Does it need OSS or ALSA modules installed? What actually generates the RTP

I've configured an analog/single line off my mitel sx-2000 to a x100p card in my *, however when the remote caller drops the line I get a dialtone back from my pbx and the x100p doesn't detect the end of the call. Any way I can tell * to drop? I've tried call progress but it doesn't seem to work...

Hello, I've 3 * boxes connected with IAX2. Everything was working correctly and since few days, after upgrading them to Asterisk 1.02, i started seeing IAX2 notify messages excahnges on port number 1024 and 1040 in addition to the specific 4569 iax2 port, is that normal ? All call between * boxes are rejected with "NO SUCH EXTENSION or CONTEXT" message, I've checked my

Hi, I compiled * and chan_alsa.so is loaded. But I can't hear any busy signal messages when calls cannot connect. Do I need to record my own message, or does * use some default ones? May I ask where can I find them? Regards, Norman Zhang

Hello I try to set up voicemails for extension. When VoicemailMain gets called, it prompts for mailbox and password. It seems not able to read from the phone. So the authentication always fails. I desparately need help to understand what is wrong. Here is a part of my extensions.conf: exten => _8500, 1, Wait(2) exten => _8500, 2, VoicemailMain(${CALLERIDNUM}) exten => _8500, 3, Hangup

HI; I have an Asterisk with 10 "SIP" ip-phones, our pbx features are now: Voicemail and Call Transfer. How can I serve both "Call Waiting / 3 way calling" for our SIP Phones.?/ Appreciate Any Help Mohammad -------------- next part -------------- An HTML attachment was scrubbed... URL: