similar to: Voicetronix FXO on OpenCall 4 vs OpenSwich 6

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

Seems strange to me that I should be having this problem but I'm stumped. I'm still playing with a Voicetronix OpenSwitch6 card and Asterisk (development CVS). I using a dialplan that's derived from one on another running installation that's using Digium FXS/FXO interfaces instead of the OpenSwitch card. It seems that as soon as a user on an FXS interface dials 7 digits, a call

While setting my first couple IP phones, I set their voicemail buttons to an extension that runs VoicemailMain. exten => 8500,1,Wait(1) ; voicemail exten => 8500,2,VoicemailMain ; exten => 8500,3,Hangup ; I would like to be able to pass the mailbox number allowing each phone to go in directly but I'd rather tno have

New to asterisk so please be gentle. I'm guessing I'm among a number of recent additions to the list after the article in Linux Mag. I gotta say I'm *very* intersted in the project and will be doing lots of reading shortly. A couble quick questions first... How suitable is Asterisk for use as an IVR providing callers with textual data out of a database? Can it be combined easily

Been tinkering and found Zapateller appears to be answering when I didn't expect it to. I have something like so: [incoming] exten => s,1,NoOp ;Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Dial(${RING},20) ... I have a 1x1 analog * installation with a couple IP phones too. I've got the FXO interface connected to the home phone line. When I get an

In case it helps others, a couple gotchas that I had to dig and beat my head against to get past... - building on FC2, use "make linux26" when building asterisk - also for FC2, a couple links in /usr/src named linux and linux-2.6 and pointing to /lib/modules/2.6.8-1.521/build/ were needed to build - yes, the power connector on the TDM400P needs to be connected to the power

Looking to outfit a 8-person office shortly and am looking for IP phone recomendations. Saw recent threads and the wiki with all kinds of suggestions and notes on configs but little on the "feel" and sound quality. I have a PolyCom SoundPointPro analog desk/speaker phone and the Cisco 7940 here. How to the other business-class phones compare, from a user's point of view, to these?

I've got a single IAXy installed in a little office nearby and got a call from someone on site a finew mintues ago. Apparently they couldn't make a call on that extension. They'd pick up the phone and get nothing; no dial-tone. Running "iax2 show peers" showed the unit still registered and I could ping it too. Didn't try to call it while it was doing this; sorry. The

Hi all, Happy Wednesday! Got a 7940G off eBay to tinker with and, per the wiki, contacted Cisco about a service contract. Being just little ol' me, they won't deal directly and blew me off (I hate dealing with Cisco, Nortel, etc as a small-business person...) Again per the wiki, I hit CDW.com and found CON-SNT-CP7960 for $9.14. Looking for support for the 7940 (not 7960), I just

I've been struggling with a test * install for a couple months now in a small office and am just about ready to give up on it. It's not that the system itself is a problem. I've got everything (attendant, voicemail, FXS extensions, Cisco and Polycom hard-IP phones, and 2 VOIP carriers) working except for the frigging analog FXO interfaces. These things are driving me completely mad.

Hi, Anyone using my spandsp or unicall software please note that opencall.org is shifting to soft-switch.org. HP have a line of telephony products called Opencall, which were very obscure in 1999, when I registered opencall.org. A search for "opencall" on Google back then returned only references to theatrical agents. opencall.com and opencll.net were theatrical sites. Now a search

I've got my 1.2.x Asterisk server registering with a SIP provider using their servers DNS entry, not their IP address. My server is behind a NAT. The setup works like a champ for weeks then I get a call reporting inbound calls are failing. When my server isn't registered, inbound callers get a "disconnected" message; very bad. When it happens, I've found that the IP

Does anybody know what happened to the opencall.org website? I can't get into the home page or the ftp site.

Hi, I was trying to get the fax capability for Asterisk, but the opencall.org nameservers don't seem to work anymore. Does anybody have the direct IP link to the source so I can get it from there ? Thanks Walter

Am I doing something wrong here? GOt a SPC-841 the other day and have it registering properly. Can place and recive calls as expected but when on the phone, a second call is immediately dumped to "busy" voicemail. Does this thing not support call-waiting? Or, have I just got my configs wrong? Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com

Running * CVS with a SPA-841 (0.9.5) and can't seem to get the message waiting light to come on automatically. There is a control in the web interface to turn it on and off (seems rather curious to me but whatever). Has anybody got an idea as to where I may be going awry? TIA, Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller

Hello all - I'm trying to get Asterisk working with an Openswitch/6 card with all ports set to FXO for PSTN in/out, and 10 SIP phones on the LAN with the Asterisk server. The SIP phones are working properly to dial one another, but I can't seem to get a call to go out to the PSTN through the voicetronix, and I similarly can't get incoming calls to the lines hooked up to the

Hi, I've tried to make toll-free DID work for the last 2-3 weeks. Apparently only the IAX.CC/Sixtel personnel can make a call to my toll-free. Anybody else just gets a busy signal. It takes for them about 5-6 business days to respond to my request. It seems they are looking in the once a week to the High priority tickets. It also seems that they are permanently closed ! No matter when I

So I'm having trouble getting call-pickup working. Got a few different SIP phones (cisco 7940's and SPA-841s) all with pickupgroup=0 in sip.conf. I can't seem to get it working. This *is* possible from SIP phones, right? Do I need to add anything to my dial-plan? -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian Ridge Drive