similar to: IAXy provisioning

Displaying 20 results from an estimated 1000 matches similar to: "IAXy provisioning"

2005 Feb 24
3
IAXY DNS possibilities??
There is no DNS functionality built into the IAXY, I am assuming you want to be able to home onto a SOHO site with a dynamic IPaddress. I have not been able to figure out a clean way to do theis (make it easy for the roaming sales-folk etc,) who will not have a high tolerance for running something like an IAXYPROV. You would need to somehow have an external fixed address which would
2005 Sep 07
1
IAXy - no dailtone
I have a brand new IAXy I'm playing with. I do not get a dialtone on the phone, or any response at ll on the phone. No sound, no dialing, no ringing. The phone and wire are tested and known to be good. I think I have it setup correctly. When I give the iaxprov command I get this: #iaxyprov 192.168.1.90 iaxy.conf 02: c0 a8 01 5a 05: 11 d9 03: ff ff ff 00 04:
2005 Jan 08
8
How do i "talk" to the IAXy...? (Newbie Alert)
Hi, hoping that experienced hands will quickly show me the right way: after a fruitless web search i am turning to this list with my rather elementary question: is there any other way to communicate with the IAXy besides using special utility software that needs to be compiled under UNIX? Here is the story: about two months ago, after some not very satisfactory attempts at using SIP (my phone
2004 Nov 19
4
IAXy Configuration
I can't seem to get this device to grab an ip from dhcp. We have a working dhcp server (unfortunately it is on Windows), but I don't show any leases requested by the iaxy. Anyone have any ideas? The ethernet and phone lines are plugged in before the device is powered. Thanks, Erik
2005 Jan 10
2
Connecting a Home based worker with An Iaxy
Hi, If I need to connect a home based user to an Asterisk server, how does the above work? Is it (after being configured/provisioned) plug and play? Anyone done this got any comments Thanks John
2004 May 13
6
IAXy
Not sure if this is the best place but does any one have any used IAXy's they are interested in selling? I am looking to pick one up cheap for a proof of concept before going all out on them. Also does any one have any real life practical experience with how well (or not so well) that these devices have worked for them? you can reply to me off list at asterisk@matraex.com Thanks Michael
2005 Jul 20
6
GSM gateway hardware
Hi All, I am looking for a GSM VoIP gateway for use with Asterisk. I have come across VoiceBlue by 2N but it's price is beyond my reach. Are there any other alternatives out there? I've scanned across the mail achieves for an answer to this without much success, if the question has already been answered kindly point me to the resource. Allan.
2005 Feb 17
4
IAXy Provisioning Using Windows
For anyone playing around with IAXy(S100i) devices, I am making the following available: Windows IAXy Provision v1.00 This is a from-the-ground-up development of a means of provisioning IAXy devices using a Windows environment. For some users, being bound to Linux for IAXy provisioning is not viable or convenient in some cases. This application provides a GUI data entry for the various IAXy
2006 Jan 21
3
cvs asterisk compile failed (newer libpri)
I used: cvs checkout zaptel libpri asterisk asterisk-addons asterisk-sounds iaxyprov astcc and in the same order I try to compile it. Asterisk ends with the lines below. It complains of a newer libpri, but I just did it a step before! What do I miss? chan_zap.c:62:2: #error "You need newer libpri" chan_zap.c:128: error: parse error before '<<' token chan_zap.c:133:1:
2004 Dec 04
2
iaxy to iaxy call drops out of "show channels"
I place a call from an IAXY to an IAXY device. INitially the calls show in the output of "show channels". Then after a few seconds the "show channels" command shows 0 active channels even though I am still talking on the channels. Any ideas on this? THanks, Jerry
2006 Mar 31
2
IAXY codec support and questions..
Hi.. I have to setup an extension in a remote location that will use a cordless analog telephone.. I am looking at the IAXY to do this for me..Basically the data path will be as follows... [Asterisk] == (NAT) == {Internet} == (NAT) == ATA -- Handset Since there are two NAT boxes in the path I know SIP won't work.. I also don't want to move the Asterisk box to the internet side of the
2004 Nov 26
2
IAXy and DHCP
Hi, I've got an IAXy, and provided it with connection data - unfortunately didn't provide a fixed ip address, but left with dhcp. Everthing went fine, and I could work a while with it. After a restart of IAXy, it didn't negotiate a new IP address, nor used the old one. I even restarted the DHCP server and cleared its cache. No success. I went to another office with a different
2007 May 10
3
Iaxy clicking
Hi, I have three Iaxy devices (s101i) parts. Two of them seem to work fine. The third plays a loud repeating click sound when an analog phone is plugged in. I can provision all of them, and make calls to all of them. The clicking one will blink when a call is incoming, but no audio from the call can be heard on the handset, and the caller only hears silence. The same handset works on the
2006 Jun 22
2
Soekris net4801 and IAXy dhcp issue
Hi all, I have a Soekris net4801-50 board with OpenBSD 3.9 where I've configured a dhcp server and tested it with a regular PC connected directly via a crossover cable with success. The problem comes when I try to connect my IAXy device instead of the PC. I can see with 'tcpdump -nettti sis1' that the IAXy isn't sending any packets to the dhcp server. I thought my IAXy was bad
2004 Jun 17
2
IAXy and bandwidth requirements
In the mailing list archives, I found a message that indicates that the IAXy has the ulaw, alaw, and g726 codecs, but I cannot find anything official on Digium's site about it. The Installation Manual has an example iax.conf file that indicates the ulaw codec, so I know that one is good. But we are thinking about using the IAXy over a VPN, to replace our MultiVoip. alaw and ulaw are
2006 Nov 27
2
Busy signal from IAXy when not connecting to my Asterisk box
I'm having a problem with my IAXy not always connecting to my Asterisk box. When I pick-up the phone plugged in to the IAXy I get a busy signal. I have to hang-up the phone and wait a few seconds after the orange LED goes out and then try again. When this happens I don't see any connection attempts in the Asterisk -r output. When I do get the IAXy to connect to Asterisk I get a
2004 Aug 30
1
Faxing with an IAXy
Hi, Has anyone got faxing working via an IAXy? I'm having trouble getting it working with a fax machine here. The IAXy works fine, I can make incoming/outgoing calls via it, however our PDQ takes a few redials to get data over to the dialled party, and faxing doesn't seem to work at all. I have turned off all the echo cancellation stuff, just in case that was an issue. Anything I
2007 Oct 03
4
IAXy and hook flash transfer
In features.conf, I have uncommented the transfer features under feature map, but I still cannot transfer using a POTS phone on an IAXy adapter. I think I am missing something here.... Any help is appreciated. Here is features.conf: ; ; Sample Parking configuration ; [general] parkext => 700 ; What extension to dial to park parkpos => 701-720 ;
2004 Oct 22
1
IAXy echo avoidance/cancellation
Ok, I searched the lists and found no definitive answer. I'm assuming the IAXy has some primitive form of echo cancel, is there anyway to adjust this? Or any ideas on what to do instead. Here's the setup, this will not be a typical setup for our company however, well whatever. Anyway it looks like this: IAXy --> Netgear router --> Charter --> Level3 --> Asterisk --> VOIP or
2005 Jan 03
2
IAX2 (IAXy) and DTMF Question
I am having trouble with a DTMF-based application on Asterisk 1.0.3. Specifically, when two IAX2-based devices are talking, when they send DTMF to eachother, the other side only hears clicks, and maybe a millisecond of DTMF tone, but not any real duration. Furthermore, when one IAXy device calls the Echo test program, we can hear our echo, but when we punch DTMF in, we get the same effect