I can't seem to get this device to grab an ip from dhcp. We have a working dhcp server (unfortunately it is on Windows), but I don't show any leases requested by the iaxy. Anyone have any ideas? The ethernet and phone lines are plugged in before the device is powered. Thanks, Erik
i had a similar issue when i first got mine. ended up being a typo in the config file ... - hcir On Nov 19, 2004, at 2:31 PM, Erik Espinoza wrote:> I can't seem to get this device to grab an ip from dhcp. We have a > working dhcp server (unfortunately it is on Windows), but I don't show > any leases requested by the iaxy. > > Anyone have any ideas? > > The ethernet and phone lines are plugged in before the device is > powered. >
Erik, can you please post your config-file ? Erik Espinoza schrieb:>I can't seem to get this device to grab an ip from dhcp. We have a >working dhcp server (unfortunately it is on Windows), but I don't show >any leases requested by the iaxy. > >Anyone have any ideas? > >The ethernet and phone lines are plugged in before the device is powered. > >Thanks, >Erik >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >
On Fri, 2004-11-19 at 15:31 -0800, Erik Espinoza wrote:> I can't seem to get this device to grab an ip from dhcp. We have a > working dhcp server (unfortunately it is on Windows), but I don't show > any leases requested by the iaxy. > > Anyone have any ideas? > > The ethernet and phone lines are plugged in before the device is powered. > > Thanks, > ErikI remember a note on the list about issues with a cisco switch, and conecting an iaxy..... Mine wouldn't grab an ip either (win2k server), and a cisco 3500. I haven't had time to try a different switch yet. -- Tony Nichols <tony@mail.applog.com> Appalachian Log Structures Inc.
I'm trying to get a "Digium IAXy" working on an ethernet connected to my asterisk server using the instructions in the "Iaxy_installation_guide.pdf". I configured the iaxy.sample.conf file with my information: server: 192.168.1.91 user: clab pass: camaro I also entered the suggested configuration into the "iax.conf" file and the "extensions.conf" file though I am not sure the line: "exten => 1234,1,Dial(IAX2/asteriskhost.company.com@iaxy/s)" is what I want. I tried entering the IP of the IAXy but still fails. I would not think I need to go out to the Internet to complete this call or am I wrong? Let me continue; I ran the "iaxyprov" utility, started asterisk and power cycled the IAXy unit and get an error: "no registration for 'clab' (from 192.168.1.96)" the ...96 address is assigned to the IAXy by my DHCP when I go off hook I get the message: "rejected connect attempt from 192.168.1.96". I am hoping to be able to originate and terminate a call with the IAXy, not internet calls but calls to anf from the analog POTS line. Thanks Chad ' As for the server I'm have a TDM400 with one FXO and a FXS module. Calls using these modules work but not the IAXy calls. Thanks Chad