similar to: Call Monitor Fails after Transfer

I have a problem with incoming calls being recorded after a supervised transfer. Call comes in, receptionist answers, caller put on hold, Asterisk Monitor is recording, caller is on Hold, Callee picks up the call, Asterisk Monitor Stops. All recorded calls are named CallerID to Exten. Receptionist sees the incoming PSTN callerID, yet when we get a transfer from the receptionist, we

Is there a way to keep the incoming CallerID from the PSTN and pass it onto the sip phone receiving the supervised call transfer? The receptionist receives the PSTN callerID, performs a supervised transfer, we get her local SIP callerID, not the original callers. The main reason we would like the true callerID is for asterisk monitor to name the file correctly for call records. Is this

Hi I'd like to allow users to transfer a call to a specific park number. This way, the receptionist can tranfer a call park for ext 100 at park number 7100 etc... It seems like this should be fairly simple using the Park(ext) app but it doesn't work for me. No matter what I extension I use, the system just picks the next available park number. I've simplified my dialplan for

Hi, I have an odd problem when doing a blind transfer. The transfer is intiated and the transferred caller hears nothing until the timeout. I have tried setting the 'r' and the 'm' variables in the dial command. Nothing happens when I use the 'r' variable when I use the 'm' variable I briefly hear music on hold and then it stops until the timeout for no answer

I am trying to have the ring types different for internal and external incoming calls. I have followed the guide on the wiki, the SetVar executes, in extensions.conf I have it as s,1, Yet it doesn't work? When the phone rings, the ring type is the one I chose on the phone, it rings same tone for both when I test. Using Asterisk Stable. Anyone got this working and can

Hello list, i am using: asterisk CVS-10/13/03-11:54:33 chan_capi-0.3.0 ATA-186 V2.16.1.ms over MGCP Situation: ISDN calls ATA ISDN speaks with ATA ATA-Phone presses Flash and speaks to another one (SIP/snom200) ATA-Phone hangs up ISDN talks to SIP/snom200 snom200 hangs up The incoming extension of ATA keeps busy for a time (20 sec?), even its not off-hook anymore! Any ideas? -- Swapping

Hi All, I need some help w/supervised transfer and conference w/a 7940 phone. When I do a blind transfer the calls go through great, but when I do supervised transfer the 7940 tells me "Transfer Denied". When I do a conference call I hit the "conf" key and then dial the next extension. The new call connects and I hit "conf" again but the calls do not get bridged.

Guys. This idea has been banging my headfor days now and I feel the need to share with you. Imagine this scenario: all calls come in thru a receptionist, asterisk records all incoming calls, the receptionist's work is to transfer the calls to internal people but some of them are bosses and you know how bosses are, they don't want their calls to be recorded, so, I have been trying to

I am so far unable to get the busy lamps on a Snom 220 to work either with current cvs or asterisk 1.0. I am using the hint extension and the Snom 220 just as described in the "mini-howto" on: http://www.mail-archive.com/asterisk-users@lists.digium.com/msg49781.html There are also a couple of wiki pages referencing this: http://www.voip-info.org/wiki-Asterisk+standard+extensions

Hi, I'm having problems with transfer from an analog line via a X100p and Cisco 7960's running SIP. With an attended transfer the a call comes in, I transfer it to another 7960, they answer I announce the call, press transfer again, the two parties talk for 1-2 seconds then the analog line drops, though the Cisco phone is not aware of this, i.e. nothing on the screen changes. The

I am having a bit of a problem implementing the pickup command in my dial plan. I have setup this rule: exten => _*8XXX,1,Pickup(${EXTEN:2}) This works as expected when someone dials an extensions number and I can get the call. The problem I have is that when a call enters my welcome menu and does not press anything there is a timeout that sends them to the recepcionist. The rule is:

Hi all, I'm quite new on this mailing list, and I discover the asterisk world. I m experimenting a PBX with SIP phones, grandstream budgetone (not expensive for tests) All the features I need work just not one : the supervised call transfers. I know there are a lot of posts about that, but none gave me the correct answer (unless I missed it). Here is my config : 2 sip phones BT102 with

I'm having an issue with CDR. Basically, I expect to have all "legs" of a call having the same linkedid and differing only by the sequence value. That does happen, but I'm getting null dst values after doing an attended transfer. I'm not sure if this is a bug or I'm doing something wrong. I'm running Asterisk 13.2.0. Here's the console log, step by step: First,

Hi! I've got a number of extensions (about 50) on a working Asterisk setup. For each user, I have two extensions configured (for example 11021 for a Cisco 79XX phone and 11022 for X-Lite), and a ring group that ties the two extensions together (for example, 1102). Reason being that if the user is away from his/her desk or working offsite, they can answer the soft phone on the PC. From

hello all- Long time listener, first time caller. This is a great list and has given me tons of help as I've set up * for the first time. I've got an asterisk system up and running at a new company, and it does about 99% of what we need it to do. TelephonyWare has been our equipment supplier, and has been great with support, but I've got an issue that has us both stumped.

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

Hi Running bristuffed 0.3.0-PRE-1f which is 1.2.1. Using *2 in features.conf for attended transfer. Works well if someone answers. But the following sequence causes issue: 1. Receptionist takes call. 2. *2 then 123 to transfer to extension 123. 3. 123 is busy or does not answer so receptionist hears 123 voicemail 4. How can receptionist reconnect to calling user - could wait for voicemail to

I am having a problem with my queue_log. When an agent transfers a call I am not getting the extension that was dialed for transfer, I am only getting the name of the macro we use: 1425307308|1425307242.33367|PedidosKosmos|Agente 102|TRANSFER|s|macro-stdexten|13|52|1 1425309366|1425309316.33729|PedidosKosmos|Agente 102|TRANSFER|s|macro-stdexten|7|42|1

Hi! Could someone give me a hand? If I dial 200 for echo testing it works... Everytime I dial an extension ex. 505 get the error below.... In this example it was from 508>505 a Xlite Pro to a TA. I believe it has something to do with the way i'm executing the command dial but I use the "standart" that comes in the samples from asterisk. *CLI> -- Executing

Hi all, I am running Asterisk in conjunction with a Sip proxy. Asterisk is registered to an external SIP carrier (sip.uni.it) If a call reachs Asterisk through the SIP carrier, then it is forwarded to the external SIP proxy extension (530 at weboffice.dyndns.org), when the extension 530 that has answered the call tries to transfer the call to another extension (513 at