similar to: Door buzzer.

Hello We have setup a doorbell which has an inbuilt analog phone which is connected to our Asterisk via a SPA2000 ATA. The problem we are getting is that when a caller presses the buzzer it is taking two or more minutes to finally call the reception phone. In the SPA2000 I have set dtmfmode to be inband. I notice that with the asterisk you dial a number and then it waits for a timeout

Skipped content of type multipart/alternative

Hi, Can anyone recommend a cheap SIP doorphone? Please only respond if you've had personal experience of a doorphone. Many thanks Dan Journo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091014/f85cfdb5/attachment.htm

Hi, Does anybody know of a VoIP compatible doorbell or door intercom unit? I've contemplated buying a cheap SIP phone, ripping it apart, and putting it inside an IP66 sealed unit... It would need: - At least one speed-dial key, or some way to make every button dial the same extension number - PoE (power over ethernet), so I can power it off the central switch - cheap enough to rip apart

Hello all, i read a few articles online about the possibility to setup a "buzzer" door system to PBX using asterisk! currently my setup contains asterisk of course, and a sipura 3102.. what do i need to get such a feature done?! or should i ask if its possible?! _________________________________________________________________ Connect to the next generation of MSN Messenger?

Hi, could anybody suggest a usable doorphone and magnetic door opener "hardphone" system for me, please? Of course should be connectable to asterisk. I am in the EU, should be available here. thank you, Csaba

Hi, Anyone know anything about Asterisk's support for door phones? Receiving the call from the door intercom system, opening the door, etc? Any hardware recommendations? I understand that the equipment we have now is Panasonic proprietary and came with the currently deployed Panasonic TD12-32 pbx. We intend to deploy Asterisk in a 72 extensions + 16 trunks in a while, so any info will be

I have an extension that looks like this: exten => 5555551111,1,Verbose(Door buzzer calling) same => n,Dial(SIP/user1&SIP/user2&SIP/user3) The idea is that any of the three users can answer the phone to let someone in. The problem is that if, say, user2 unplugs his phone then the call immediately goes to his voice mail and the other two do not have the ability to open the door.

Hello, I ordered the Devel lite kit, and installed it. I am just trying to get the FXO port to work, and am having trouble. To load the card I do the following. modprobe wcfxs modprobe wcfxo ztcfg -vv asterisk -vc My /var/log/asterisk/messages show Nov 3 11:03:39 WARNING[3317]: zt hook failed: Device or resource busy Here is my /etc/zaptel.conf fxoks=1 fxsks=4 loadzone=us defaultzone=us

Hello, I am wondering if anyone is using the Nortel 2001 2002 or 2004 phones on their asterisk implementation. My local dealer says they are not compatible with any open source implementations. Is there a phone compatibility list somewhere? Cheers Cian

I've done all the googling I can on this, and have come to the conclusion that a Grandstream BT101 can be abused to be a door phone. Could someone with access to one, confirm that the following is possible? Researched: 1. When set to auto-answer, dialing the phone will result in a short beep and instant speaker-phone connection. 2. When pressing the "message" button while

Hello, Before throwing in the towel with my Sipura 3000 has anyone had much success with that adapter connected to a door phone? In our setup a doorphone is connected to the SPA's fxs port. When a visitor rings, asterisk calls a group of Polycoms and the person who answers has to enter *1 to trigger the door opening. However it seems the SPA doesn't relay the DTMF's to the

Hi, I am attempting to create a intercom buzzer system using asterisk as a back end. Most is figured out except the actual action of buzzing the door. I need to detect whether a DTMF key was pressed by the the called party (the resident). Is this possible to do using just a dialplan? I can't see any options on the Dial command that would lead to this, am I looking in the wrong place? I looked

On Tue, 30 Aug 2016 17:56:35 +0200 Administrator TOOTAI <admin at tootai.net> wrote: > Something like > > exten => 5555551111,1,Verbose(Door buzzer calling) > same => n,Set(toRing=) > same => n,ExecIf($["${DEVICE_STATE(SIP/user1)}" = "NOT IN > USE"]?Set(toRing=${toRing}&SIP/user1) Failed. I checked the online docs and the syntax seems to

Hi everyone, our setup includes a NEC PBX connected to our asterisk via bri lines. The NEC has a doorphone feature, which is just an extension that calls you when someone rings. When connected to this extensions, a 'flash' signalling opens the door. So now, i'd like to trigger this from asterisk, too, but unfortunately wasn't able to do so. Setup: asterisk

Hello Asterisk Users and those with an Interest in VoIP Tech, The agenda is open for our next meeting. I think we'll plan on an open discussion of anyone's choosing. If we're lacking a topic, we'll give a demo of installing fail2ban for your asterisk system. Bring your questions, ideas and projects and we will help you work through them. Jimmy John's is just a block away

Hi! I would like to connect a door phone to my asterisk server. I decided to do that with an analog (a/b) doorphone and a sipura box. Can anyone give me a recommendation for a door phone with good voice quality? I am from Austria/Europe and I looked at products from Rocom and from Auerswald. Does anyone use one of these door phones and can me tell his/her opinion on that?! thx in advance, tom

Hi! I am new to asterisk and I'd like to know wheter the following scenario is possible: Someone press the Button on the door station. The door station dials lets say the extension 333. I take the call on 333 and talk with the person on the door. Now I'd like to activate the door opener by pressing some numbers on the analog telefon. Asterisk should now recognize that I pressed

Hi, Is there an affordable HW solution to do a door phone on *? I do not mind using the solder iron to modify an existing door box. Thank you! Best regards HB Norway

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com