Angus Comber
2005-Sep-30 05:40 UTC
[Asterisk-Users] analog phone/door buzzer going through a Sipura SPA2000 ATA dials really slowly
Hello We have setup a doorbell which has an inbuilt analog phone which is connected to our Asterisk via a SPA2000 ATA. The problem we are getting is that when a caller presses the buzzer it is taking two or more minutes to finally call the reception phone. In the SPA2000 I have set dtmfmode to be inband. I notice that with the asterisk you dial a number and then it waits for a timeout before dialing number. I think you use a # to say - just dial now. Well we can't program a # into the door system, but could program in another character. Is it possible to use another character? Any ideas would be much appreciated. Angus
Matt Riddell
2005-Sep-30 05:51 UTC
[Asterisk-Users] analog phone/door buzzer going through a Sipura SPA2000 ATA dials really slowly
Angus Comber wrote:> Hello > > We have setup a doorbell which has an inbuilt analog phone which is > connected to our Asterisk via a SPA2000 ATA. The problem we are getting > is that when a caller presses the buzzer it is taking two or more > minutes to finally call the reception phone.Asterisk will not cause it to wait two or more minutes. 3 seconds yes, 2 minutes, no... Unless you have some funky gotoifs or loops or waits etc.. -- Cheers, Matt Riddell _______________________________________________ http://www.sineapps.com/news.php (Daily Asterisk News - html) http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss)
Angus Comber
2005-Sep-30 06:25 UTC
[Asterisk-Users] analog phone/door buzzer going through a SipuraSPA2000 ATA dials really slowly
The unit dials 300 and in my extensions.conf I have: exten => 300,1,Dial(SIP/200&SIP/201,30) exten => 300,2,Hangup So perhaps it is some setting in the Sipura ATA? ----- Original Message ----- From: "Matt Riddell" <matt.riddell@sineapps.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Friday, September 30, 2005 1:51 PM Subject: Re: [Asterisk-Users] analog phone/door buzzer going through a SipuraSPA2000 ATA dials really slowly> Angus Comber wrote: >> Hello >> >> We have setup a doorbell which has an inbuilt analog phone which is >> connected to our Asterisk via a SPA2000 ATA. The problem we are getting >> is that when a caller presses the buzzer it is taking two or more >> minutes to finally call the reception phone. > > Asterisk will not cause it to wait two or more minutes. 3 seconds yes, 2 > minutes, no... > > Unless you have some funky gotoifs or loops or waits etc.. > > -- > Cheers, > > Matt Riddell > _______________________________________________ > > http://www.sineapps.com/news.php (Daily Asterisk News - html) > http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss) > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >