similar to: isdn4linux delay

I use SIP over VPN with RR from TWC no problem, connect via WiFi. According to http://www.speakeasy.net/speedtest/ I am getting 3.5Mbps down and 353Kbps up at this time (6:15pm Saturday). My laptop currently has an X-Lite (free version) softphone with GN Netcom USB professional contact center headsets (GN8110 USB XP adapter). We have found that the headset makes a major difference in the quality

Hi, I try to use ISDN4Linux drivers with Asterisk. In modem.conf i put /dev/ttyIO. Everything is OK when i lauch asterisk but, when i call Asterisk nothing happen. Someone can help me ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030407/13e78d8e/attachment.htm

Hello, Anyone on this group using / implementing * and hardware certified for use in Europe ? I believe that ISDN4Linux cards mostly have telecomm certificates, so using them should be safe on the client side. Are there any major issues / problems associated with using such cards with * ? I am talking about a small / very small office with single - few lines. All the best, Piotr Adamiak --

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! After LOTS of research on this list and internet in general I managed to get an old Teles PCI card working with Asterisk throught ISDN4Linux. No echos, no delays, simply perfect -- electronic poetry ! :) eheheheheh I just didn't get it to work with CAPI and "chan_capi" but, since isdn4linux is doing such a good job, I'll

Hello all, does anybody have experiences with DDI on ISDN BRI? I would like to order DDI with 10 or 100 numbers from telco company, and use DDI numbers for direct calling SIP/H323 clients. But I don't know if Asterisk supports it, in archive I found only one answer about it, and I'm not sure. I am going to use it with isdn4linux card. Maybe DDI is called differently in other countries,

I'll try again using my subscribed address... Apologies to the moderators... --- Hi All, I've successfully got SIP and IAX2 working on Asterisk using X-Lite as a SIP phone and talking to a remote Asterisk over IAX2 using G729. I'm now trying to get an ISDN BRI connection working. I have a Traverse NetJet card (http://www.traverse.com.au/) which I currently have working with

Hi, Apologies in advance for the lengthy email. I'm new to asterisk and have trouble with isdn4linux. The setup is very basic like this: winxp ------- asterisk -------- winxp x-lite | x-lite | pstn The hardware involved is: Compaq EVO with RH9/kernel 2.4.20-30.9. Fritz!Card PCI v2 Asterisk CVS-04/17/04-21:36:18 Basically

Hi I have installed the http://asteriskathome.sourceforge.net/ with a Digium card with no problems, very good ! Now I want to install my Billion PCI ISDN card (HFC based) in TE mode. I get a little confused with Isdn4Linux, ZapHFC HIAX and the need to install Capi ! Please suggest best and easiest approach ? Thank you ! HB Norway

Original Post ---------------- I have an Asterisk related problem with mutualphone. I can connect to any number with any softphone that I am using (iaxcomm, SJPhone, and a few others). Also I have a Grandstream BT 101. But I cannot call (via Asterisk) to mutualphone destinations. Other destinations go fine. A working phone call (e.g. from iaxcomm) gives the following on the console: --

Hello all, I was wondering if anybody knows where one might obtain a PCI ISDN card supporting a single BRI for use with Asterisk in Australia (and using something like chan_capi). Because of the Isdn4Linux DTMF issue, I don't want one of those cards. I've already spent too much time messing about with my current card. I'm after something like the AVM Fritz! cards. I found one place

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

Hello! Im very new to asterisk. At first i will need it to send wave files to an specified number over an isdn card. What will i need to do this? Which modules i need for this job and how to setup the asterisk server? I know its complicated question but i dont know how to set it up. Have read some how-to?s on voip-info.org like asterisk and isdn4linux but dont see the right way to get it

Hello, I'm having trouble working out how to send DTMF tones to an external IVR. My system has an analog phone connected to a TDM400P card, a SIP software phone (Zultys LIPZ4) and is connected to a BRI in Australia with a NETjet-S card. I'm using ISDN4Linux and a 2.4.25 kernel patched with the ISDN audio patch from Traverse (which allows the card to do voice). DTMF works fine between

Hello All, I was just after a few pointers. I have just setup my Redhat 9 linux box with asterisk. Internal SIP call working fine. My Eicon ISDN card turned up today so - plugged it in and went through the modem.conf. It reports unable to open /dev/ttyI0 The problem is I have never used ISDN with Linux - let alone a telephony app - and I have no idea even where to start. Some pointers

hello Sorry for my poor english... A have probleme with callerid with isdn4linux I am using diva pci 2.02 passive card, Asterisk 1.0.4 (i have tested all releases) Fedora core 2 Zaptel card All work great but i have not the caller id. I have trace chan_modem_i4l.c, and callerid id string send by isdn4linux is ok (CALLER NUMBER: XXXXXXX RING/YYYYYYY and so on...) I never could install isdn

hi i am experiencing some problems with the configuration of an BN8S0 Beronet card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel 2.6.16.18 and the enabled the following: <*> ISDN support x x Old ISDN4Linux ---> x x --- CAPI subsystem x x <M> CAPI2.0 support x x [*] Verbose reason code reporting (kernel size +=7K) x x [*]

God save this mailling list :) Which is the best settings for the best quality of Audio ? I'use isdn4Linux driver and SIP client but bad quality PSTN <-> Asterisk and SIP <-> PSTN

Mine is very similar: i don't have echocancelwhenbridged=yes because it seems work only on TDM, is it ? And in Italy, I often have set pridialplan = unknown About echo I have some problems, but only at the beginning of the call. After 3-4 seconds the echo became almost null, specially with snom 190; with pa168s and ywh10 I have again some problem, the echo come up also after 1 minute of

hi, i just found a page on the net which might me worth some lines. for the urgent reader: http://isdn.jolly.de there is a guy in germany who has successfully programmed a gpl-patch for isdn4linux to make isdn cards with the hfc chipset from cologne chip (http://www.colognechip.com) run in the NT mode (up to 2.4.20). this mode is needed to connect isdn device to a pc and enables the use of