similar to: Polycom 500 bootrom.ld problem

Hi, I have was testing some of the different ring types with my polycom 500, and the ALERT_INFO settings. Now when my phone receives a call it won't ring. All the other phones ring fine, and my phone wasn't the only one I rebooted with the changed sip.conf and impd.conf. I have reverted back to a standard sip.conf and impd.conf and I still can not get my phone to ring for any incoming

Hello everyone, Please forgive the exclamation points but I have been battling this one off and on for about four days now. Sorry for the cross post. It all started with a box of IP 501s. I contacted my reseller and obtained the latest BootRom and SIP firmware. Unzipped, configured, copied over to my FTP server (running AstLinux, of course). The phone booted, so far so good. Updated

I'm having problems updating my bootrom to the latest (3.2.2) version. Basically, my phone starts downloading the bootrom, but I am completely certain that it doesn't actually complete the process. It gives me an "error updating bootROM!" message, but it only takes about 2 seconds to complete the download (which, because of my WAN link and FTP server environnement I know is

I was progressively upgrading this phone from 3.1.2 to 3.2.3, then to 4.0.0. v3.2.3 worked fine, but when I went to 4.0.0 (Even adding the more specific 2345-11500-040.bootrom.ld), it won't run, and just keeps rebooting. Now I've got a really nice doorstop unless someone knows how to get out of this predicament. Help! 0925003705|cfg |3|00|Beginning to provision phone 0925003705|dns

...even when I do the "factory reset" (4-6-8-* then 456). I tried using FTP and TFTP, but even though the phone uploads the log, I get these errors: 0927211350|app1 |3|00|Time has been set from 0.us.pool.ntp.org(69.60.124.59). 0927211350|cfg |4|00|Could not get all 512 bytes of the header. 0927211351|cfg |4|00|Could not get all 512 bytes of the header. 0927211422|app1 |4|00|Loaded

I've had an IP300 for a while now and it's been working fine. I just got an IP500 and when it connects to the FTP server it downloads the new bootrom and says error loading. The bootrom is fine and works on the 300... In addition, I downloaded a new copy to be sure and it still doesn't work. Can anyone give me some advice?

Docs? Polycom has docs? Where would one find this fabled land of... err I mean Polycom does stating what ftp servers are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

I have these phones working well with Asterisk, thanks to http://www.freedomphones.net/polycom/files The code there is not the most current (and my Polycom Extranet login hasn't gotten updated yet to allow downloads). Been waiting a while for their support folks to update the access. If you know where I can get the 2.5.0 BootROM and 1.3.1 SIP code? Thanks, L.

Greetings, Recently there has been talk of the presence/buddy feature with asterisk and Polycom phones. I have it setup, and working as expected, however I can only get 7 buddies to appear on the screen at any given time. Has anyone gotten more than 7 buddies to appear? I'm just trying to find out if this is some polycom limitation, bug, or my error. Thanks, Matt -- Matt Gibson VOIP

I am using version 1.4.1.0040 and 2.6.1.0003. I have read about newer versions out there, how can I get them? I'm having an intermittent issue regarding DHCP with one of my phones, and I recall when I loaded 1.4.1 on this one phone, it failed once, then it succeeded the second time. I am wondering if a firmware update will help. Or is there any known issues with Fedora Core 2 dhcpd and IP

I'm still trying to work this out. I've got this in my sip.conf [1003polycom] type=peer secret=abc123 host=dynamic defaultip=192.168.1.215 context=default mailbox=1003 subscribecontext=phonestatus [1004polycom] type=peer secret=abc123 host=dynamic defaultip=192.168.1.214 context=default mailbox=1004 subscribecontext=phonestatus And this in my extensions.conf [phonestatus] exten =>

Did you try to boot without lan just the power ... I've had this same problem to and rebooted the device without lan connection -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Louis-David Mitterrand Sent: woensdag 26 januari 2005 11:36 To: 'Asterisk Users Mailing List - Non-Commercial Discussion'

I got em. You want em? Anyone know how I can get these to the site listed on the Wiki? Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/dfee13b3/attachment.htm

Hey all, Just getting started playing around with my Polycom 600. According to the wiki, it looks like it's recommended to run BootRom 2.6.1 and SIP 1.4.1. Is that info still current, or is it safe to upgrade to 3.0.1 and 1.5.2? Justin --

I have a question about DHCP and boot server supporting more than 1 model of Polycom phones. According to Polycom "standards", Polycom phone boots up to get a DHCP address and at the same time getting a boot server string (with username and password) to logon to boot server to download SIP, bootROM and etc. That is okay if there is only one type of phone (that requires a specific SIP

Hey all, I'll give my reseller a call for support in the morning, but I usually have better/faster luck on the list. I've got a SoundPoint IP500 that I upgraded to BootROM 2.6.2 and SIP image 1.5.2 on someone elses advice, I forgot to change out the old config for the new when I loaded the image up (I guess the config changed a bunch between 1.5.2 and 1.3.1) I was prompted with an error

Ever since I upgraded my Polycom 500 to the newest sip.ld (kept the old bootrom), when I dial things like "*98" for voicemail, the screen shows "9*8" and doesn't dial my voicemail system! Is this user error, or errors in the new firmware? Chris Coulthurst chris@shuksan.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

i recently bought an SP4000 conference phone but having problem provisioning it using ftp, every time it just hangs at "Updating initial configuration..." screen. when i switch it to tftp, it'll work fine. i though it was bootrom/firmware issue so i upgrade it to bootrom 3.2.2/sip 2.0.1 but it makes no difference. any thoughts? p.s. i'm using debian sarge proftpd 1.2.10 and the

I have been struggling over central provisioning for quite some time. I have eagerly watched each post with like problems but have yet to find a reliable answer. I have a Polycom 501 and I am trying to provision from an FTP server, and just to take any routing out of the issue it is on the same subnet. I am running the 2.0.1.0291 firmware and 3.2.2 bootrom. I set the IP info on the phone and

We are having an issue that I have been unable to figure out how to resolve. I think its related to the Polycom Phones and not the Asterisk configuration, but I'm not positive. We have several Polycom 500/501/601's on both a LAN and at employee homes. The problem we are having is if our internet connection goes down the Local LAN phones loose their connection to the Asterisk Server.