similar to: call/pickup groups

Hello I have a Junghanns ISDN BRI card for incoming calls and use SIP Polycom IP300 phones. My config files look like this: features.conf pickupextn = *8 zapata.conf context=frompstnisdn group=1 callgroup=1 pickupgroup=1 I also edited sip.conf like this: group=1 callgroup=1 pickupgroup=1 But on internal and incoming calls if I dial *8 from any phone I cannot pickup. Do I need to add

The problem: T100P connected to an Adit600. Channel 1-16 are FXS, 17-24 FXO. I have Zap/24 in callgroup 3 and Zap/1-16 in pickupgroup 3. When a call comes in on Zap/24 I cannot pick it up with *8 from Zap/1-16. *CLI> show version Asterisk CVS-04/27/04-23:48:08 built by root@tuck on a i686 running Linux The zapata.conf and extensions.conf are located here:

Hi, I have been trying to workout how to use the call pickup. So Far, I have the following in zapata.conf [channels] signalling => fxo_ks context => local pickupgroup=1 callgroup=1 channel => 1-3 When I dial *8# all I hear is busy tone. What have I missed? thanks Jay.

Hi there, it appears that call pick-up only works _within_ a technolgoy, i.e. with a SIP phone when another SIP phone is ringing. Is that correct, or is my configuration faulty? * Case 1: SIP phone 1 ringing - SIP phone 2 can pick the call up with *8 We are happy! :-) * Case 2: IAX phone ringing - SIP phone can't pick the call up: NOTICE[10250]: Nothing to pick up * Case 3: SIP phone

Should setting a namedcallgroup & namedpickupgroup supersede numeric callgroups and pickupgroup ? I've got 5 peers on my 13.7.0 box, Three of them have a namedcallgroup & namedpickupgroup of 'kiniston' and Two of them have a namedcallgroup & namedpickupgroup of 'sanday'. I'm not specifying a numeric callgroup or pickupgroup so all the peers are defaulting to

Hello, I have set pickupgroup and callgroup for zap, sip and iax2 devices. Everything is working good with zap and sip and between these two. Iax2 pickupgroup and callgroup seems to be broken. I cannot pickup a call to IAX2 from SIP. Is there somewhere a bug ? I am running: Asterisk 1.2.9.1 Bartosz

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

I must be getting something wrong about this call pickup. In zapata.conf I have just the default callgroup=1 and pickupgroup=1. If I call from my mobile to * and then try to dial *8 from any other phone than the one which is ringing I just get a "Nothing to pick up" answer on my * console. I also have experimented with those parameters in sip.conf but are not aware of exactly where to

Hi, In my office I%u2019m using mixed architecture of Zap and Sip phones, everything works fine but I have got some problems with picking up Sip channels. To be certain I can%u2019t do it at all, after I%u2019m dialing *8 the console says "nothing to pick up" (despite I configure appropriate callgroup and pickupgroup). Do I need some additional application or Asterisk code

Hi! I have the following weird problem: phones A,B and C are in the same callgroup/pickupgroup. A call B, B is ringing, C calls *8. Now, B is CANCELed, C gets 200 OK, but A is still in Ringing. Is there anything else I have to configure? thanks Klaus

I'm using the Debian Sarge package of Asterisk - 1.0.7 + bristuff. When I call from a zap channel or a SIP phone to another SIP phone, then dial *8 from a third SIP phone, I get 503 Service Unavailable on the third phone and I get this at the Asterisk console: Jun 28 09:01:24 DEBUG[16774]: res_features.c:1709 ast_pickup_call: No call pickup possible... Jun 28 09:01:24 NOTICE[16774]:

More than one hundred messages related to *8 or call pickup problem in last 6 months!! Please someone in the development team could clarify this and make himself responsible for the response. By now It seems a bad joke. We have spent thousand dollars with hardware, sip phones, working men hours, and with digium stuff (E1, fxo, fxs cards etc) and we have had the *8 problem (sip callee ringing

Hi everyone, Is there a simple way of answering a different ringing extension from a sip phone using AAH? I have absolutely zero technical know-how when it comes to modifying conf files etc. Still working on figuring it all out. ;) That brings me to my second question... where the hell does one find an extensive manual of sorts that explains all conf files and what the strings all mean etc?

Hi, I asked a time ago what were callgroup and pickup group used for. I have done some proofs and all, and I'm not sure if I have pick the idea up well!! That's what I understand: For example: group=1 callgroup =2 and pickupgroup=2 and my phone is a membership of the group 1. that's mean that when a phone that belong to group 2 is ringing, I'll be able to answer this call dialing

Daniel Heckl <daniel.heckl at gmail.com> schrieb: > You are searching for ?Call Pickup?. It is implemented in Asterisk by > default. > > https://wiki.asterisk.org/wiki/display/AST/Call+Pickup > <https://wiki.asterisk.org/wiki/display/AST/Call+Pickup> Take a look under > section ?Configuration Options?. Hi, Daniel! Thanks for your answer... I'm using Asterisk

In the list I found some messages that *8 doesn't work so well. Is there any possibility to create a extention that you can call, and if you are fast enough, pick up a number? (Also if you are outside your callgroup) like pseudo code: exten => 888, 1, EnterPhoneNumber() exten => 888, 2, EnterPass() exten => 888, 3, TransferCallToThisPhone() exten => 888, 103, Invalid()

I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured

Hello all. I saw a few weeks ago a discussion about cal pickup, *8, not working but did not find a message about it being resolved, I look for a bug on the bug list but did not find anything about it not working, nor a bug open. I installed asterisk 0.9.0, have one sip fxo gateway and only sip phones, all of them have callgroup=1 and pickupgroup=1 but I can not get a call that is

Hello, We are using asterisk 0.4.0 on debian sid with Cisco 7960 and ATA186 phones. All sip entries have: callgroup=1 pickupgroup=1 However I am unable to remotely pickup a ringing phone using *8#. I get fast busy tone. Is there some flag to add in extensions.conf ? Thanks in advance,