asterisk users - Sep 2003 - Callgroup, Pickupgroup and SIP

I have just started to play with callgroups and pickupgroups..

I updates my * from CVS this morning (about 15 mins ago)..

I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone
configurations in sip.conf..

I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the
call does not get picked up by phoneC and continues to ring on phoneB..

Have I not configured somthing correctly or is there a bug??

Later.
-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze

I think *8# is only in the Zap channel driver. There was talk on the list
recently (past day or two) about moving these hard coded codes (like *70 for
call waiting, *67 to block caller ID etc) out of the Zap channel driver and
in to the dialplan so they could be used on SIP and provide some
commonality.

I don't think you can do call pickup on SIP although the group may prove me
wrong...

I have problems with this as well ( similar config ).  My CVS is 10 days 
old.

I can get the call picked up with *8     (  *8# does not work )  but 
 the phone B never stops ringing.
B rings forever. I'm using SNOM200.

--Pertti


WipeOut . wrote:
>I have just started to play with callgroups and pickupgroups..
>
>I updates my * from CVS this morning (about 15 mins ago)..
>
>I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone
configurations in sip.conf..
>
>I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the
call does not get picked up by phoneC and continues to ring on phoneB..
>
>Have I not configured somthing correctly or is there a bug??
>
>Later.
>  
>
-- 

**********************************************************************
Nordic LAN&WAN Communication Oy
Pertti Pikkarainen
vp of engineering
E-Mail: ppik@lanwan.fi
tel: +358-9-5024100
fax: +358-9-5023840
gsm: +358-500-511467

Sinikalliontie 16
02630 Espoo
FINLAND

**********************************************************************

OK you are correct..

*8 picks up the call..I wonder why *8# does not work??

I also had the same problem that the phone that I collected the call from did
not stop ringing..

> 
> 
> I have problems with this as well ( similar config ).  My CVS is 10 days 
> old.
> 
> I can get the call picked up with *8     (  *8# does not work )  but 
>  the phone B never stops ringing.
> B rings forever. I'm using SNOM200.
> 
> --Pertti
> 
> 
> WipeOut . wrote:
> 
> >I have just started to play with callgroups and pickupgroups..
> >
> >I updates my * from CVS this morning (about 15 mins ago)..
> >
> >I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone
configurations in sip.conf..
> >
> >I place a call from phoneA to phoneB, then I go to phoneC and dial *8#
, the call does not get picked up by phoneC and continues to ring on phoneB..
> >
> >Have I not configured somthing correctly or is there a bug??
> >
> >Later.
> >  
> >
> 
> -- 
> 
> **********************************************************************
> Nordic LAN&WAN Communication Oy
> Pertti Pikkarainen
> vp of engineering
> E-Mail: ppik@lanwan.fi
> tel: +358-9-5024100
> fax: +358-9-5023840
> gsm: +358-500-511467
> 
> Sinikalliontie 16
> 02630 Espoo
> FINLAND
> 
> **********************************************************************
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze

On Tue, Sep 09, 2003 at 08:23:49AM +0000, WipeOut .
wrote:
> OK you are correct..
> 
> *8 picks up the call..I wonder why *8# does not work??
> 
> I also had the same problem that the phone that I collected the call
> from did not stop ringing..
I have the same problem. Mark Spencer is working on the bug, he logged
into my machine yesterday to see it first hand.

-- 
"I had no wish to arrive, but I had to do my utmost, in order to
arrive." -- Samuel Beckett, The Unnamable

Just add callgroup={number} and pickupgroup={number} into each SIP phone's
config in the sip.conf file..
> Hello,
> 
> What configuration should I use for this (I use sip phones)?
> 
> Best regards,
> 
> Daniel
> 
> 
> WipeOut . a écrit:
> 
> >OK you are correct..
> >
> >*8 picks up the call..I wonder why *8# does not work??
> >
> >I also had the same problem that the phone that I collected the call
from did not stop ringing..
> >
> >
> >  
> >
> >>I have problems with this as well ( similar config ).  My CVS is 10
days
> >>old.
> >>
> >>I can get the call picked up with *8     (  *8# does not work ) 
but
> >> the phone B never stops ringing.
> >>B rings forever. I'm using SNOM200.
> >>
> >>--Pertti
> >>
> >>
> >>WipeOut . wrote:
> >>
> >>    
> >>
> >>>I have just started to play with callgroups and pickupgroups..
> >>>
> >>>I updates my * from CVS this morning (about 15 mins ago)..
> >>>
> >>>I have placed callgroup=1 and pickupgroup=1 into each of my 3
phone configurations in sip.conf..
> >>>
> >>>I place a call from phoneA to phoneB, then I go to phoneC and
dial *8# , the call does not get picked up by phoneC and continues to ring on
phoneB..
> >>>
> >>>Have I not configured somthing correctly or is there a bug??
> >>>
> >>>Later.
> >>> 
> >>>
> >>>      
> >>>
> >>-- 
> >>
>
>>**********************************************************************
> >>Nordic LAN&WAN Communication Oy
> >>Pertti Pikkarainen
> >>vp of engineering
> >>E-Mail: ppik@lanwan.fi
> >>tel: +358-9-5024100
> >>fax: +358-9-5023840
> >>gsm: +358-500-511467
> >>
> >>Sinikalliontie 16
> >>02630 Espoo
> >>FINLAND
> >>
>
>>**********************************************************************
> >>
> >>
> >>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users@lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>    
> >>
> >
> >  
> >
> 
> -- 
> Daniel ANDRE (mailto:dandre@iris-tech.fr)
> IRIS Technologies - http://www.iris-tech.com
> Serveur kwartz - http://www.kwartz.com
> 
-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze

Skipped content of type multipart/alternative

When last did you update from the CVS??

But it curently doesn't work anyway so just hang in there and hopefully it
will be fixed soon..


> It's exactly what I have done, I have this log message:
> NOTICE[114696]: File chan_sip.c, Line 4870 (handle_request): Nothing to 
> pick up
> WARNING[114696]: File chan_sip.c, Line 2220 (__transmit_response): 
> Unable to determine sequence number from ''
> 
> From  276 I dial 326 and trie to pickup using  273. I include my sip.conf
> 
> Regards,
> 
> Daniel
> 
> 
> WipeOut . a écrit:
> 
> >Just add callgroup={number} and pickupgroup={number} into each SIP
phone's config in the sip.conf file..
> >
> >  
> >
> >>Hello,
> >>
> >>What configuration should I use for this (I use sip phones)?
> >>
> >>Best regards,
> >>
> >>Daniel
> >>
> >>
> >>WipeOut . a ?crit:
> >>
> >>    
> >>
> >>>OK you are correct..
> >>>
> >>>*8 picks up the call..I wonder why *8# does not work??
> >>>
> >>>I also had the same problem that the phone that I collected the
call from did not stop ringing..
> >>>
> >>>
> >>> 
> >>>
> >>>      
> >>>
> >>>>I have problems with this as well ( similar config ).  My
CVS is 10 days
> >>>>old.
> >>>>
> >>>>I can get the call picked up with *8     (  *8# does not
work )  but
> >>>>the phone B never stops ringing.
> >>>>B rings forever. I'm using SNOM200.
> >>>>
> >>>>--Pertti
> >>>>
> >>>>
> >>>>WipeOut . wrote:
> >>>>
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>>>I have just started to play with callgroups and
pickupgroups..
> >>>>>
> >>>>>I updates my * from CVS this morning (about 15 mins
ago)..
> >>>>>
> >>>>>I have placed callgroup=1 and pickupgroup=1 into each
of my 3 phone configurations in sip.conf..
> >>>>>
> >>>>>I place a call from phoneA to phoneB, then I go to
phoneC and dial *8# , the call does not get picked up by phoneC and continues to
ring on phoneB..
> >>>>>
> >>>>>Have I not configured somthing correctly or is there a
bug??
> >>>>>
> >>>>>Later.
> >>>>>
> >>>>>
> >>>>>     
> >>>>>
> >>>>>          
> >>>>>
> >>>>-- 
> >>>>
>
>>>>**********************************************************************
> >>>>Nordic LAN&WAN Communication Oy
> >>>>Pertti Pikkarainen
> >>>>vp of engineering
> >>>>E-Mail: ppik@lanwan.fi
> >>>>tel: +358-9-5024100
> >>>>fax: +358-9-5023840
> >>>>gsm: +358-500-511467
> >>>>
> >>>>Sinikalliontie 16
> >>>>02630 Espoo
> >>>>FINLAND
> >>>>
>
>>>>**********************************************************************
> >>>>
> >>>>
> >>>>
> >>>>_______________________________________________
> >>>>Asterisk-Users mailing list
> >>>>Asterisk-Users@lists.digium.com
> >>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>> 
> >>>
> >>>      
> >>>
> >>-- 
> >>Daniel ANDRE (mailto:dandre@iris-tech.fr)
> >>IRIS Technologies - http://www.iris-tech.com
> >>Serveur kwartz - http://www.kwartz.com
> >>
> >>    
> >>
> >
> >  
> >
> 
> -- 
> Daniel ANDRE (mailto:dandre@iris-tech.fr)
> IRIS Technologies - http://www.iris-tech.com
> Serveur kwartz - http://www.kwartz.com
> 
>
> ;
> ; SIP Configuration for Asterisk
> ;
> [general]
> port = 5060			; Port to bind to
> bindaddr = 192.168.10.254	; Address to bind to
> context = SIP			; Default for incoming calls
> tos=lowdelay
> ;tos=184
> ;tos=50
> ;rxgain=30
> ;txgain=30
> threewaycalling=yes
> 
> allow=ALAW
> disallow=GSM
> disallow=ULAW
> 
> 
> ; valeurs pas defaut
> 
> ;téléphone grandstream benoit.
> [276]
> mailbox=276
> type = friend
> host = dynamic
> canreinvite = yes
> dtmf=inband
> pickupgroup=1
> callgroup=1
> 
> 
> [273] ;téléphone grandstream Antoine
> mailbox=273
> type = friend
> host = dynamic
> canreinvite = yes
> dtmf=inband
> pickupgroup=1
> callgroup=1
> 
> [235] ; téléphone grandstream Arnaud
> mailbox=235
> type = friend
> host = dynamic
> canreinvite = yes
> dtmf=inband
> pickupgroup=1
> callgroup=1
> 
> 
> [338] ;téléphone grandstream Dominique
> mailbox=338
> type = friend
> host = dynamic
> canreinvite = yes
> dtmf=inband
> pickupgroup=1
> callgroup=1
> 
> 
> [222] ; téléphone grandstream Daniel
> mailbox=326
> type = friend
> host = 192.168.0.2
> canreinvite = yes
> dtmf=inband
> 
> [326] ; téléphone grandstream Daniel
> mailbox=326
> type = friend
> host = dynamic
> canreinvite = yes
> dtmf=inband
> pickupgroup=1
> callgroup=1
> 
> 
-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze

know bug http://bugs.digium.com/bug_view_page.php?bug_id=0000116


WipeOut . wrote:
>I have just started to play with callgroups and pickupgroups..
>
>I updates my * from CVS this morning (about 15 mins ago)..
>
>I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone
configurations in sip.conf..
>
>I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the
call does not get picked up by phoneC and continues to ring on phoneB..
>
>Have I not configured somthing correctly or is there a bug??
>
>Later.
>  
>