Man, I really feel stupid, but after banging my head on a brick wall for
several hours ... I need help!
I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten
5707, and I've got an xlite on 5608.
When I make a call from an outside line, I dial SIP/5608. The little
blinky light on the GXP that's monitoring 5608 goes, well, "blink
blink". :) I then press the button and get a "603 declined". This
is the
dialplan smippet:
[blf]
exten => 5608,hint,SIP/5608
..snip..
..snip..
exten = > 444608,1,Dial(Sip/5608)
..snip..
exten => _**XXXX,1,Pickup(${EXTEN:2})
exten => _**XXXX,n,Hangup()
both phones are in the same context, callgroup and pickupgroup. I've
tried adding all of the @context that I have, to no avail.
Accepting call from 'xxxxxx' to 'xxx608' on channel 0/1, span 1
-- Executing [xxx608 at isdnspan1:1] Dial("Zap/1-1",
"SIP/5608") in new
stack
Extension Changed 5608[blf] new state Ringing for Notify User 5707
-- Called 5608
-- SIP/5608-083ea7a8 is ringing
Extension Changed 5707[blf] new state InUse for Notify User 5707
-- Executing [**5608 at from-sip:1] Pickup("SIP/5707-08393e10",
"5608")
in new stack
-- Executing [**5608 at from-sip:2] Hangup("SIP/5707-08393e10",
"") in
new stack
== Spawn extension (from-sip, **5608, 2) exited non-zero on
'SIP/5707-08393e10'
-- Executing [h at from-sip:1] NoOp("SIP/5707-08393e10",
"++++ HANGUP
FROM-SIP ++++ [/16]") in new stack
Extension Changed 5707[blf] new state Idle for Notify User 5707 (queued)
Extension Changed 5707[blf] new state Idle for Notify User 5707
-- Channel 0/1, span 1 got hangup request, cause 16
Extension Changed 5608[blf] new state Idle for Notify User 5707
Any help would be much appreciated.
Thanks
Julian
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
A little more information:
If I change the dial command to
..snip..
exten = > 444608,1,Set(__PICKUPMARK=5608)
exten = > 444608,n,Dial(Sip/5608)
..snip..
and the pickup command to
exten => _**XXXX,1,Pickup(${EXTEN:2}@PICKUPMARK)
exten => _**XXXX,n,Hangup()
then it works ...
Julian
Julian Lyndon-Smith wrote:> Man, I really feel stupid, but after banging my head on a brick wall for
> several hours ... I need help!
>
> I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten
> 5707, and I've got an xlite on 5608.
>
> When I make a call from an outside line, I dial SIP/5608. The little
> blinky light on the GXP that's monitoring 5608 goes, well, "blink
> blink". :) I then press the button and get a "603 declined".
This is the
> dialplan smippet:
>
> [blf]
> exten => 5608,hint,SIP/5608
> ..snip..
>
> ..snip..
> exten = > 444608,1,Dial(Sip/5608)
> ..snip..
>
> exten => _**XXXX,1,Pickup(${EXTEN:2})
> exten => _**XXXX,n,Hangup()
>
> both phones are in the same context, callgroup and pickupgroup. I've
> tried adding all of the @context that I have, to no avail.
>
> Accepting call from 'xxxxxx' to 'xxx608' on channel 0/1,
span 1
> -- Executing [xxx608 at isdnspan1:1] Dial("Zap/1-1",
"SIP/5608") in new
> stack
> Extension Changed 5608[blf] new state Ringing for Notify User 5707
> -- Called 5608
> -- SIP/5608-083ea7a8 is ringing
> Extension Changed 5707[blf] new state InUse for Notify User 5707
> -- Executing [**5608 at from-sip:1]
Pickup("SIP/5707-08393e10", "5608")
> in new stack
> -- Executing [**5608 at from-sip:2]
Hangup("SIP/5707-08393e10", "") in
> new stack
> == Spawn extension (from-sip, **5608, 2) exited non-zero on
> 'SIP/5707-08393e10'
> -- Executing [h at from-sip:1] NoOp("SIP/5707-08393e10",
"++++ HANGUP
> FROM-SIP ++++ [/16]") in new stack
> Extension Changed 5707[blf] new state Idle for Notify User 5707 (queued)
> Extension Changed 5707[blf] new state Idle for Notify User 5707
> -- Channel 0/1, span 1 got hangup request, cause 16
> Extension Changed 5608[blf] new state Idle for Notify User 5707
>
> Any help would be much appreciated.
>
> Thanks
>
> Julian
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
Arrgh. this is driving me nuts. Can anyone put me out of my misery ? Pretty please ;) Julian Lyndon-Smith wrote:> Man, I really feel stupid, but after banging my head on a brick wall for > several hours ... I need help! > > I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten > 5707, and I've got an xlite on 5608. > > When I make a call from an outside line, I dial SIP/5608. The little > blinky light on the GXP that's monitoring 5608 goes, well, "blink > blink". :) I then press the button and get a "603 declined". This is the > dialplan smippet: > > [blf] > exten => 5608,hint,SIP/5608 > ..snip.. > > ..snip.. > exten = > 444608,1,Dial(Sip/5608) > ..snip.. > > exten => _**XXXX,1,Pickup(${EXTEN:2}) > exten => _**XXXX,n,Hangup() > > both phones are in the same context, callgroup and pickupgroup. I've > tried adding all of the @context that I have, to no avail. > > Accepting call from 'xxxxxx' to 'xxx608' on channel 0/1, span 1 > -- Executing [xxx608 at isdnspan1:1] Dial("Zap/1-1", "SIP/5608") in new > stack > Extension Changed 5608[blf] new state Ringing for Notify User 5707 > -- Called 5608 > -- SIP/5608-083ea7a8 is ringing > Extension Changed 5707[blf] new state InUse for Notify User 5707 > -- Executing [**5608 at from-sip:1] Pickup("SIP/5707-08393e10", "5608") > in new stack > -- Executing [**5608 at from-sip:2] Hangup("SIP/5707-08393e10", "") in > new stack > == Spawn extension (from-sip, **5608, 2) exited non-zero on > 'SIP/5707-08393e10' > -- Executing [h at from-sip:1] NoOp("SIP/5707-08393e10", "++++ HANGUP > FROM-SIP ++++ [/16]") in new stack > Extension Changed 5707[blf] new state Idle for Notify User 5707 (queued) > Extension Changed 5707[blf] new state Idle for Notify User 5707 > -- Channel 0/1, span 1 got hangup request, cause 16 > Extension Changed 5608[blf] new state Idle for Notify User 5707 > > Any help would be much appreciated. > > Thanks > > Julian > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
On Wed, 12 Nov 2008, Julian Lyndon-Smith wrote:> Man, I really feel stupid, but after banging my head on a brick wall for > several hours ... I need help!AIUI - Pickup works on an extension.. So if the xlite is SIP/5608, but extension is 444608, then you need to pickup 444608. Gordon> > I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten > 5707, and I've got an xlite on 5608. > > When I make a call from an outside line, I dial SIP/5608. The little > blinky light on the GXP that's monitoring 5608 goes, well, "blink > blink". :) I then press the button and get a "603 declined". This is the > dialplan smippet: > > [blf] > exten => 5608,hint,SIP/5608 > ..snip.. > > ..snip.. > exten = > 444608,1,Dial(Sip/5608) > ..snip.. > > exten => _**XXXX,1,Pickup(${EXTEN:2}) > exten => _**XXXX,n,Hangup() > > both phones are in the same context, callgroup and pickupgroup. I've > tried adding all of the @context that I have, to no avail. > > Accepting call from 'xxxxxx' to 'xxx608' on channel 0/1, span 1 > -- Executing [xxx608 at isdnspan1:1] Dial("Zap/1-1", "SIP/5608") in new > stack > Extension Changed 5608[blf] new state Ringing for Notify User 5707 > -- Called 5608 > -- SIP/5608-083ea7a8 is ringing > Extension Changed 5707[blf] new state InUse for Notify User 5707 > -- Executing [**5608 at from-sip:1] Pickup("SIP/5707-08393e10", "5608") > in new stack > -- Executing [**5608 at from-sip:2] Hangup("SIP/5707-08393e10", "") in > new stack > == Spawn extension (from-sip, **5608, 2) exited non-zero on > 'SIP/5707-08393e10' > -- Executing [h at from-sip:1] NoOp("SIP/5707-08393e10", "++++ HANGUP > FROM-SIP ++++ [/16]") in new stack > Extension Changed 5707[blf] new state Idle for Notify User 5707 (queued) > Extension Changed 5707[blf] new state Idle for Notify User 5707 > -- Channel 0/1, span 1 got hangup request, cause 16 > Extension Changed 5608[blf] new state Idle for Notify User 5707 > > Any help would be much appreciated. > > Thanks > > Julian > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >