similar to: Calling Waiting on PSTN line

Help! I am having a problem getting wall waiting to work. I have a X100p and a TDM400 card with and analog phone attached (as well as a number of SIP phones) running on RedHat 9.0 box. The PSTN line has the call waiting feature. If I am on the phone, I get a beep indicating a second call is waiting. However, there is no way, no how, that I can get it to switch to the second line! Flash button,

Hi, I hope someone could help me, i have a x100p interface for testing purpose and on each incomming call I redirect the call to handytone 388 atas, the problem comes when i'm during a call and another call comes in, i hear the call waiting beep (comming from the zap channel), but I can't catch the call as usually using flash+2 (my pstn call wait sequence), because when i flash the

Hi all, Hopefully you can help me. I want to turn off the audio "Call Waiting" beep that plays during a call. I have found the line in the indications.conf for Call Waiting but apart from setting the frequency to zero or the length to zero is there a proper way to disable this functionality. thanks very much alex This email and any attached files are confidential and

I'm trying to switch from one call to another incoming call from PSTN. When I'm getting a "beep" I press flash but instead of swithing to the second call, I'm getting a dial tone. even if I press *0, I cannot connect to the second call. Anybody had this problem? Tx, Bogdan

I have been looking for the answer to this question for a while. Google-ing and reading the archives of Asterisk-Users has not enlightened me. It seems that this question has been asked many times, and many times it has gone unanswered. I have call waiting and three way calling on my PSTN line from Verizon (the local telco). This is connected to a FXO port on a TDM400P. I also have

I had a similar issue with sending a flash to the PSTN for call waiting. I found that my dial plan in the extensions.conf file was not allowing me to dial *xx. Once I corrected my dial plan I was able to dial *0, *69, *78, *79, etc. Training the wife on how to actually use it was an entirely different issue. I have not tried to enable 3-way calling via the PSTN. "Jeff Otterson"

Is there anyway to turn off the call waiting beep in the grandstream and/or cisco ata186? I have a dial statement in my extensions.conf that rings 5 phones at the same time by combining them with the & in the dial statement. i.e.) exten => blah,blah,Dial(SIP/GS1&SIP/GS2&SIP/GS3&SIP/ata186a&SIP/ata186b,25,t) If one of those lines is being used, then the user gets a really

Hi, The call waiting tone is very annoying (you hear nothing while it plays the beep). I need callwaiting because of the queues (the phone has to ring as soon as you hangup) but I want to remove the beep on my dahdi channels, how can I do? Thanks, Niccol? -- http://www.linuxsystems.it

Hi all, How can I implement a full-featured Call-Waiting behavior on the Asterisk level (e.g. I don't want to relay on end-equipment capabilities)? I found it very strange that such a basic feature is not built-in in Asterisk (and I've googled a lot in search for this). Here is what I need: SomeuserX is calling MyUserA. They are on conversation (assumption: voice is via the Asterisk)

hi all: the following scipt is wokring perfectly with limiting ...on limimitng per ip basis.. ---- eth0=public static ip eth2= private ip ( 192.168.2.1) -- iptables -t mangle -A POSTROUTING -s ! 192.168.0.0/32 -d 192.168.2.101/32 -j MARK --set-mark 21012 tc class add dev eth2 parent 1:1 classid 1:2101 htb rate 32kbit ceil 64kbit tc filter add dev eth2 parent 1:0 protocol ip prio 2 handle

Hi, I'm running 1.2 beta1 in a mini call center. I have 3 queues with 10 operators, and I'm running into some trouble because when all the operators are busy answering call asterisk still sends them more, resulting in a "beep beep" (call waiting) over and over again in Xlite audio. An easy solution woud be the use of a "single line" user agent, like firefly, still

Hello, I'm facing problem where as whenever there are incoming call from pstn, there will be no audio coming in. User at the other end also could not hear my voice. This happens few days back. Im using asterisk 1.6.1.2 with dahdi tool 2.2.0. I thought it was time to upgrade, so upgraded to dahdi 2.2.1 and asterisk 1.6.2.5. However, it does not help at all. My current config as follows :-

Greetings I have a X100p and a TDM400P card in a Redhat 9 server. If Asterisk is not suhtdown properly (reboot without stopping Asterisk or power failure etc), I have to do a modprobe command after the restart before Asterisk works again. Any ideas how to resolve this. Martin -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am working on linux 2.6.16.I tried to prioritize traffic using prio module but its not working well.It always maps to same class irrespective of ToS.Is it possible to fix it using filters?Anybody fixed this problem? -- Regards Archana Rajagopal _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller

Hi, I have (to me) an interesting problem. There are 3 physical extensions, 11, 12 and 13. All hang off Sipura adapters. There is also extension 10 which simply uses 'Dial(SIP/11&SIP/12&SIP/13)' to call all phones in the house. Incoming calls from outside get sent to 10 in order that they can be answered from any phone.. Now - if (say) 11 is on a call externally, and 12 calls

Great Rowland!!! in fact by using the line server service = +dns I am able to have the internal DNS and the kerberos server working!! now kinit works just fine thanks! (btw, do we have the list of "services" that we can put in the smb.conf?) ___________________________________________________________________________________________ Mario Pio Russo, System Admin SWG IT Services

Hi, This issue has been discussed probably a million times on every asterisk forum in the world and I have the same problem too. Another problem you would have with the agents is that when they make an outgoing call they are not regarded as "busy" by asterisk and it sends more calls to the agent if it has call waiting enabled. This behaviour is totally senseless since the whole purouse

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

The following patch is just a cleaned up version from http://research.vovoid.com/smbssh/ which also includes a nice explanation of what the patch is trying to achieve. Full credits should go to them for this pacth, I have simply got it wokring on 3.6.1p2 and I am submitting it here to see if people believe it should be included in the general distribution. Cheers, Mark. -------------- next