Displaying 20 results from an estimated 300 matches similar to: "viewing fax tiffs?"
2003 Dec 30
7
Programming an unlocked ADSI phone?
What kind of channelbank/FXS port are you connecting to?
I've seen problems connecting to some of the older versions of the
Adtran Total Access 750's. I wouldn't doubt there would be problems on
other channelbanks with older firmwares. Of course, no firmware on CAC
AB1's
I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P
card, and it worked fine on the
2005 Feb 03
2
E&M Wink problems
We're having some difficulty connecting a T1 fax board card to asterisk,
with E&M Wink. We've successfully connected it to other E&M Wink T1s,
but have been unable to get asterisk to hear it's dialing. Asterisk can
dial down to it with no problem, and it hears all the digits, but
whenever it sends digits down to asterisk, * always only "gets" the
first one.
This is
2004 Apr 15
2
TE405P + Adit 600 and FXO module - should this work?
Folks,
I'm experimenting with bringing multiple (8) analog lines from our local
telco into a Carrier Access ADIT 600 channel bank with an FXO module, then
having this talk to Asterisk via the T1 TDM controller on the ADIT and a
TE405P card.
I don't know if this will work well (ie: give me decent echo cancellation,
call disconnect supervision, caller ID etc) but I haven't had much
2004 Jan 12
2
Wrote new tiff package, would like big-endian tiffs for testing
Over the years I have noted a couple of people interested in an R package that will read tiff files. There were some valid arguments against (e.g. R is not an image editting suite, libtiff does not support all tiff files, etc.). True enough, when I want to work with family photos, I use Gimp. But in my research I use tiffs as data sets in the context of computational biology and molecular
2018 Mar 31
1
using llvm DataFlowSanitizer error
Hi. I'm using llvm DataFlowSanitizer. I add such code in library libtiff.
dfsan_label lt_label = dfsan_create_label("buf_offset", 0);
dfsan_set_label(lt_label, (unsigned char *)buf, size);
But when i compile libtiff with "-fsanitize=dataflow" option, then there is an error as follows:
../libtiff/libtiff.so.5.2.5: undefined reference to `dfs$jbg_enc_init'
2004 May 03
3
RFD: With echo and other distortion, can ulaw/alaw line quality ever be good enough for faxing?
Folks,
I've been following recent discussions regarding echo and echo training with
much interest, since it's a problem we've never been able to eliminate here.
We're facing two challenges presently, and they may be related (or not):
a) Cisco 7960s in the office here echo back to our staff, but the customer
hears decent sound.
b) We've yet to be able to pass faxes through
2009 Jun 29
1
Lattice and high-resolution tiffs
Hi,
I am trying to produce high-resolution (600dpi+) TIFF figures for use
in a publication. Everything seems to work well when using the
"normal" R-graphics and the relative text size obtained is independent
of the output resolution. However, when I try and make lattice plots,
the relative size of the text labels changes when I adjust the
resolution - they become extremely small at high
2004 Jan 11
1
New Version of SJPhone
I just installed the new version of SJPhone and it appears that it cannot work with * anymore?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040111/25c910bb/attachment.htm
2004 Nov 29
1
T.38 support
T.38 is often put forward as the solution for reliable FAX over VOIP.
Just wondering for anyone using T.38 (with any equipment), how well does it work as compared to a FAX PSTN call?
Thanks.
Jim
James H. Thompson
jht@lj.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041129/3ea08b2c/attachment.htm
2004 Jun 10
2
Using Asterix and Hylafax with Eicon DIVA E1
Hi,
I would like to set up a high density FAX/PBX server, am looking at using
Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this
possible. I know Extensions can be reserved for voice OR fax with the
combination of chan_capi used for * voice, capi4hylafax on fax but then
channels must be dedicated rather than shared ie. would like to be able to
answer voice/fax on same DID.
2005 Oct 17
1
fax - conversion problem
I am having a strange problem.
On one * box I setup the fax recive, via spandsp -app_rxfax
I have no problem here.
On a second box I did the same. The resulting PDF appear "corrupt".
If I transmit the same fax to both * box, the tiff files received are the
same.
A deeper analysis shows the only problem is the width and heigth of the
document
In the first PDF, I see
2005 Oct 18
8
Fax2Mail
Hello,
Is there or can anyone provide a comprehensive guide (designed for Linux/Asterisk novices) to installing/setting up Asterisk in order to support Fax2Mail service?
In my case, I would like Asterisk to receive fax calls to predefined numbers (ranges) and to associate each of these numbers to email addresses.
Thank you in advance.
David
---------------------------------
Yahoo!
2004 Oct 04
3
echo cancellation: the never-ending quest for truth
Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2,
MARK, MARK2 and MARK3. The current default appears to be MARK2.
My question is, has anyone had any experience with any of the others
(other than MARK2), and is there some conventional wisdom as to when to
use one over another?
TIA
Bruce Komito
High Sierra Networks, Inc.
www.servers-r-us.com
(775) 236-5815
2005 Sep 06
2
Going crazy with FAX :-(
I've upgraded Asterisk from CVS, spandsp and app_txfax and app_rxfax but i'm
still unable to send/receive faxes :-(. I'm using amp_fax to send and this is
what i get from logs:
Sep 6 11:02:52 VERBOSE[10750]: -- Attempting call on Zap/g1/666 for
application txfax(/var/tmp/ast_fax-1125997371.10240.1804289383.0|caller)
(Retry 1)
Sep 6 11:02:52 DEBUG[10750]: Dialing
2005 Mar 22
2
asterisk@home print incoming fax
*@home has this for it's incoming fax macro
--- start snip ---
[ext-fax]
exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1)
exten => in_fax,2,Macro(faxreceive)
exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf
${FAXFILE}.pdf)
exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax
from ${CALLERIDNUM}
2004 Jul 28
3
faxing
What are your experiences with faxing through Asterisk to the PSTN?
We are using g.711u as a codec, and are originating/terminating with Broadvox as
well as through our own PSTN gateways.
We have had some luck with incoming faxes coming into our network from Broadvox
DIDs. They work 50% of the time. Not sure yet on PSTN incoming since nobody
that is using FAX is in our local rate centers.
2004 Jun 20
2
Channel Bank Frustrations
I'm trying to get a Carrier Access Corp. Channel Bank I working with a
Digium T100P without success.
What is stranger is that the status lights on the channel bank and T100P
seem to change almost each time I power cycle the channel bank or reset the
T100P.
The channel bank has three status lights: T1, Framing, Status. T1 is green,
Status is yellow, and Framing is usually red but sometime
2009 Feb 27
3
Continue in dialplan on hangup
Is there a way to force a channel to continue in the dialplan after
the remote end hangs up?
Specifically, I am trying to play around with setting up a fax
server. I can receive the fax, but sometimes the sending fax hangs up
before my System command for printing can run and the fax never
prints. I know I can work around by setting up a custom context and
use the 'h'
2013 Apr 05
2
mock and iaxmodem
I am trying to build an rpm package for iaxmodem-1.2.0. At the
moment I am still trying to get a working spec file put together. I
have managed to get an SRPM produced but the binary build from this
fails due to there being no install task in the Makefile.in provided
with the source.
I have found a spec file from opensuse that provides this in the
install portion:
%build
[
2004 Jan 07
8
Asterisk + fax
Hi,
does anyone have any recommended (read tried and tested) way of making asterisk
be able to handle incoming faxes.
I've a PC running asterisk with a digium E1 card in and simply want to be able
to route a call to some application which will take a fax call and save the fax
as an image.
I guess the bits I'm unsure of are how to terminate a fax call without a
modem (if this is