similar to: No sound from IVR scripts, yet calls placed without any problem.

Hi all, I've been batting my head against a brick wall for the best part of the day and still haven't got any further (apart from getting a big headache, that is). I've searched the Wiki and Googled the hours away, but I still can't find supportive documentation. I've just replaced my ISDN Fritz!/chan_capi setup with a HFC/Zap configuration and had the following problems: 1

Hi all, Maybe I'm being thick here, but I've had a look through the mailing list and the Wiki, and I can't seem to see details of anybody else with this problem.... With the following line: exten => s,1,HasNewVoicemail(201) I am getting the following error: -- Executing HasNewVoicemail("SIP/201-2f1e", "201") in new stack Sep 2 12:41:09

Hi, the app HasNewVoiceMail can't find my voicemail. This is the errormessage: Dec 3 14:24:01 NOTICE[12222481]: app_hasnewvoicemail.c:104 hasvoicemail_exec: Voice mailbox 25 at /var/spool/asterisk/voicemail/default/25/(null) does not exist however this is the output of lspbx:~# ls -l /var/spool/asterisk/voicemail/default/25/ total 316 -rwx------ 1 root root 11814 2003-11-22 18:18

hi list. after my unsuccessfull experiences with mISDN i tried again to implement a zaphfc based solution. problem is: sound on calls via capi is stuttering/broken and therefore unuseable. my conf: - cel 1300, 256mb ram - avm b1 via capi connected to my outgoing ISDN - acer surf pci via zaphafc and crosslink cable with termination as internal bus - siemens gigaset 3035 as internal phone -

Hi all, i am using CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a with Cisco ATA-186 3.1.1 atamgcp We are used to make an special ;) blind transfer like (Flash)Number(Hangup before anyone answers or ring). Then * crashes (see below) if the man in the middle is an cisco-ata-186-mgcp If one waits until the last one rings, then hangup, everything is fine. If one waits until the last one

Hi all, I'm having serious problem getting zaphfc to work on my box. I d/l'd bri-stuff-0.1.0RC3/RC4a and followed the instructions to the dot. Everything builds fine. But, when 'make load' the whole machine will freeze. Anyone had the same problem and managed to solve it? I'm using a Billion HFC PCI card on Trustix 2.0 running kernel 2.4.26. As a side note, I feel that

Hi everybody! I've managed to compile the bristuff patch on asterisk from Junghanns.net. I want to run this on the quadBRI card built into the PC. As I said, driver and asterisk are compiling well, but "asterisk -vvvvc" bombs with this message: [pbx_dundi.so]Nov 24 15:57:53 WARNING[1076754432]: loader.c:242 ast_load_resource: /usr/lib/asterisk/modules/pbx_dundi.so: undefined

Hi All, I have setup 2 trunks using 2 different voip providers using sip. the first one i have no problem calling inbound then redirected to an IVR, i can hear the IVR. the second one has issues, inbound works going to IVR as i can see it on the CLI, but i don't hear anything. i tried redirecting it to an extension not an IVR just to see if inbound really works, and it rings the

Hello, I have a specific problem, I have a large dataframe, and after clustering I want to select certain colums, the elements of a subcluster. My dataframe looks like this : > colnames(data) [1] "101KF4319097339" "102KF4319101170" "103KF4319047549" "104KF4319046389" [5] "105KF4319013260" "106KF4319025582"

Hi, I have a ivr, and I need to make a beep sound playback after phone when to dial sip DIALSTATUS} = $ {ANSWER example 1234,1,Answer() 1234,n,Dial(SIP/1234) ;When 1234 sip phone answer te call, playback beep on this sip phone. how could I do this? thanks for any help -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, We have a working asterisk with 1 E1 and a TE405P. During conversation, when one side is speaking, the other hears sometimes (every 5 to 20 seconds, it is random) a little deformation of the voice/sound. It sounds like "scricth" and not during more than 0.5 seconds. We have exactly the same problem when asterisk give messages to caller by an IVR. No need to be lot of

Hi all, I am having a problem with a recent installed *. The IVR, voicemail internal greeting sounds don't play!. I see on the CLI interface that it is "playing" but I can't hear anything. I have the following configuration on the asterisk. - Current Asterisk CVS - A TDM400 with 4 FXOs - A FRITZ ISDN using CAPI - Linux Debian

Dear prospective reader, I apologize for posting my problem but I've just no idea how to go on by processing this huge (over 70 MB) dataset. Thank you in advance for any help or comment! I do appreciate it! My textfile contains 1 column of interest (numbers/values only). The overall issue is to extract 'events', starting points of which are defined by at least 24 preceding values

Hi, Suppose I've got a matrix, and the first few elements look like "x1 + x3 + x4 + x5 + x1:x3 + x1:x4" "x1 + x2 + x3 + x5 + x1:x2 + x1:x5" "x1 + x3 + x4 + x5 + x1:x3 + x1:x5" and so on (have got terms from x1 ~ x14). If I want to replace all the x1 with i7, all x2 with i14, all x3 with i13, for example. Is there an easy way? I tried to put what I want

Can someone explain why I am getting the following error: in the r code below? Error in solve.default(diag(2) + ((1/currvar) * (XX1 %*% t(XX1)))) : system is computationally singular: reciprocal condition number = 0 In addition: There were 50 or more warnings (use warnings() to see the first 50) The R code is part of a bigger program. ##sample from full conditional

Hi! We are in process of setting up an audio guide that will cover notable places of our capital Riga, Latvia. The target audience are tourists that dials a free phone number from a mobile handset to listen to a 3 minute introduction to historic place. All audio, 10+ languages are recorder in studio at 44KHz. The audio is stored on server in A-law 8KHz because we'll be pushing it through E1

Hi all, I have just received the following e-mail from an Asterisk user: "I just made a call via BT to a mobile. Then an incoming call came in and Ann else answered it - it made my call go completely fuzzy and I could hear what the woman on the other line was saying to Ann but I couldn't hear my conversation! When Ann's call finished - mine went even fuzzier and all I could hear

[Please keep r-help in the cc: list] I don't quite know how to interpret the difference between specifying effort as an offset vs. as weights; I would have to spend more time thinking about it/working through it than I have available at the moment. I don't know that specifying effort as weights is *wrong*, but I don't know that it's right or what it is doing: if I were

Hi, all I can not figure this out, please have a look and help me out. thank you! Note: this is in SPLUS, not R. I have following code *********************************** modfit<-function(yir,yew, ft) { n<-length(yew) yew<-yew[1:(n-1)] yy<-yir-ft xx<-yew-ft n<-length(xx) xx0<-xx[2:n] yy0 <-yy [2:n] xx1<-xx[1:(n-1)] fit <- garch(yy0~xx0 + xx1+var.in.mean,

Hello, I have a nasty loop that I have to do 11877 times. The only thing that slows it down really is this merge: xx1 = merge(dt,ua_rd,by.x=1,by.y= 'rt_date',all.x=T) Any ideas on how to speed it up? The output can't change materially (it works), but I'd like it to go faster. I'm looking at getting around the loop (not shown), but I'm trying to speed up the merge first.