similar to: MWI light on Cisco Phones

We have several agents on queues, and want to indicate to them that they are logged in or logged out. We have tried several different ways, from changing the screen to presenting different service menus, but cannot get anything to be "in their face" (their words, not mine). One of our team has suggested, as the agents do not have voicemail, is to use the MWI on the 7940 phones to

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

> thanks, using your example, and this url: > http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186a00800dea82.shtml <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note 09186a00800dea82.shtml> > I got it to work... then I realized that there's no way the SIP phone > on asterisk is going to get the MWI ( message waiting

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

Long story short... Snom's ... Retrieve button... works when MWI is *NOT* lit but does *NOT* work when it is lit. Any advice Useragent : snom360/6.5.2 Function: F_RETRIEVE [root@pbx ~]# asterisk -rx "show version" Asterisk 1.2.13 built by root @ pbx on a i686 running Linux on 2006-11-17 16:35:22 UTC [gateway] exten => 201,hint,SIP/201 exten =>

Hello. I am using a snom 320 running 5.3.6 with Asterisk 1.2.4. In the sip.conf entry, I have mailbox=1234@default and vmexten=*98. The light on the snom 320 turns on when I have voicemail and the retrieve button dials the correct extensions. However, the light turns off immediately after making the call to voicemail, even if I do not check the voicemail. Any idea on how to get this to behave

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Hey there. I've been working on a project to integrate Asterisk with Exchange Unified Messaging via sipX using large parts borrowed from: http://blog.lithiumblue.com/2007/04/accessing-exchange-2007-unified_29.html ... and everything works surprisingly well. The one problem I have is MWI, or a lack thereof. Exchange 2007 doesn't support MWI of any kind (!), so I've been looking into

Hi Guys, Running Asterisk v1.4.26 (Elastix flavour) and have Aastra 9480i, 6757i, and 6730i, but none of them indicate the voic-email. Where should I look for trouble to find the root issue for MWI? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100714/d268d1f8/attachment.htm

I've taken a look at: http://www.voip-info.org/tiki-index.php?page=Getting+MWI+on+Polycom+Phon es+to+work+with+Asterisk I've followed those directions but when I press my message key it doesn't dial the number specified... It actually dials 614p which is the user I register with. My MWI light works, and worked before following those directions, but... I can't make it auto

I have a Sipura 962 endpoint on Asterisk 1.4 where the MWI works perfectly, however my theory is that it should be broken. Obviously I'm wrong but "Sip show subscriptions" does not show the endpoint subscribing to the MWI status on Asterisk, even though all of the other endpoints on the system DO subscribe for their respective mailboxes, including SNOM & Polycom endpoints.

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

Hello I am running the following setup in order to make VoIP calls at home. Home Phone <-> SPA3000 <-> Asterisk Home <- IAX2 over Internet <-> Asterisk Office The voice mail for Home Phone is hosted on the Asterisk Office machine. I wanted to have a way to check the status of my voicemail on my home phone directly. In order to do so, I've patched both Asterisk Home and

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

Hi list, how does one get a SNOM 200 MWI to work with * ?? When I press the MWI button it doesn't connect with voice mail on my * box. thanks

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some