similar to: rxfax killed asterisk

Rxfax answers, makes handshake, and crashes once the page starts to send. It receives a .tif file of 8 bytes. Asterisk dumps core - gdb shows : #0 0x281fd86c in t4_rx_putbit () from /usr/local/lib/libspandsp.so.0 #1 0x281fea3c in fast_putbit () from /usr/local/lib/libspandsp.so.0 #2 0x28208324 in decode_baud () from /usr/local/lib/libspandsp.so.0 #3 0x2820893f in process_baud () from

I've seen people mention that they have fax reception working with Asterisk, spandsp, and app_rxfax. I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest app_rxfax.c (as mirrored by friendly list members recently), and libtiff 3.5.7. Asterisk is detecting the fax signal properly, and executing the fax extension in the dialplan. The fax part of the dialplan is pretty

Hi, I just sent this to Steve Underwood, but then found a bunch of posts on the mailing list about similar issues.. does anyone have the fix? I'm running asterisk CVS-HEAD-06/28/04-18:13:13, spandsp 0.0.1k, libtif 3.5.7 one thing i just noticed is that calls come in with format '72' which is G711A-law or LinearPCM.. it uses PCM for the call, i assume this is ok the results of RxFAX

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

Sorry to bore you more with the clock issue, but have you check /proc/zaptel/<span> to make sure it's not missing interrupts? There's also an option to record the audio for the fax, you could listen to that vs a recorded file that will receive correctly on a fax machine and see whether there is an obvious difference? (Good luck, that'll be really scraping the barrel!!) Does it

Hello All ~ Having problems sending and receiving faxes with SpanDSP. I am testing on a simple 2 analog POTS to 2x X100p set up, connecting one line to a Konica 720 fax machine to test, or with other remote fax machines. Voice calls are working pretty well now. Platform is P3/800MHz/256MB/FC1. * recognizes faxes, and passes calls to RxFax and TxFax OK, but 99.9% of the time no fax content is sent

Hi Ppl. Once, couple weeks ago when I have updated * from CVS-HEAD something happen and I could not send a fax anymore. After that I have tried previous * CVS versions with different versions of spandsp (0.0.1, 0.0.2pre4, 0.0.2pre10) but without any changes. I have tried that on Fedora Core 2 with libtiff-3.5.7-16.1 and libtiff-devel-3.5.7-16.1. Everything compiles smoothly, but when I try to send

Dear Steve i have try SpanDSP from the first version to the last one (1k) with my Canon FAX and with my modem but every time i see a lot of message like this: ----- I send a Fax from my Canon B150 i have the following error: -- Starting simple switch on 'Zap/33-1' -- Executing RxFAX("Zap/33-1", "/home/user/testfax.tif") in new stack Changed from phase 0 to 1

Hi, so far I had our PRI line connected via Digium TE410P and ZAP channel to asterisk which worked perfectly. I now have a second line coming in through a H.323 gateway and chan_oh323. rxfax() still works and receives faxes with G.711 alaw codec, but I always get one empty first page via H.323 - a one-page-fax becomes a two-page-fax with one empty page in front of it. It seems the empty page

I'm running asterisk CVS HEAD from 20040601 with spandsp 0.0.1k and libtiff 3.6.0 (no other copies are installed). I've put the audio files up at http://www.mixdown.ca/~andrew/dump/akohlsmith-faxsegfault.tgz -- the machine I am faxing from is a Canon IR3300 printer/copier/fax, but I get similar crashes from $29.95 fax machines too. :-) I'm trying to get a decent backtrace but

I've recently started playing with the RxFax application on my Asterisk box. I've had success, mostly, but I've had some failures, too... The most recent failure is specific to receiving from a particular fax machine -- a "Canon Laser Class 9000S". The TIF images received are readable, but the aspect ratio is stretched horizonatlly (or squished vertically). Is this a

Hi all, I have installed FAX app as described in several mails. When a fax call is received, I get the following in the * console: -- Starting simple switch on 'Zap/1-1' -- Executing Answer("Zap/1-1", "") in new stack -- Executing Ringing("Zap/1-1", "") in new stack -- Executing Wait("Zap/1-1", "2") in new stack

Initial handshake sounds fine, but asterisks dies before receive of the fax. Here is the log : Changed from phase 0 to 1 Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow

On the /proc/zaptel it was lost interrupts, you haven't got any so that's good! On opencall.org there's a known issues link and that mentions some fax machines that have issues, might be worth a quick check there. I can receive from our fax machine this end, if you'd like I'll send you a test fax if you send me your fax number, if you can receive from us and tpc then it's

Hi, I'm trying to send a fax from a Zap channel to another Zap channel and I can't - below the logs. How could I solve this? Thanks! In RECEIVER: -- Accepting call from '' to '1980' on channel 0/2, span 1 Urgent handler -- Executing Answer("Zap/2-1", "") in new stack Urgent handler Urgent handler -- Executing Goto("Zap/2-1",

Hi, Several people have reported problems sending faxes from spandsp-0.0.1k to Canon FAX machines. A spandsp user had the same problem with another make of FAX machine, and traced the problem to a bug in the file t30.c of spandsp. Line 542 says s->t4.rx_file[0] where it should say s->t4.tx_file[0]. This fixes his problem, and I suspect it will also fix the Canon fax machine problem.

I am also having problems receiving my first fax. I get a 320byte file (for a 4 page fax). If I look a the tiff generated, is just has some few dots. I am sending the fax from a notebook with Windows XP to an X100P and using libtiff v3.5.7. Has anyone successfully received faxes ? Output to the console as follows: Changed from phase 0 to 1 > Start receiving document > Changed from

Hello, I tryed out spandsp with libtiff-3.5.7 and with Asterisk from CVS. I tryed to receive a fax on a CAPI channel. Finally I got a file with 8 byte length (/tmp/testfax.tif). How can I do next? Thanks in advance, Thomas ps: what are hardware requirements for sending/receiving faxes? -- creating pipe for PLCI=0x101 msn = 2258589 > sent ALERT_REQ PLCI = 0x101 --

Hi There, Version 3.0.23c-SerNet-SuSE Symtoms: extremely extremely slow, high processor usage, in the dmesg, hundreds of these entries... which direction should I go... ReiserFS: sdb1: warning: Invalid hash for xattr (system.posix_acl_access) associated with [NULL] ReiserFS: sdb1: warning: Invalid hash for xattr (system.posix_acl_access) associated with [NULL] ReiserFS: sdb1: warning: Invalid

Does anyone configure that or is that possible ? Thanks in advance -- Best regards Vlad