similar to: Trunk doesn't work Adit 600/T100P

I have an adit 600 with one fxo card connected to a Digium single span T1 card. CallerID, disconnect supervision work perfect, however the users complain that they have some sound quality issues, after testing it I realized that whenever one is in a phone call they get like silence between the sounds coming from the other party, almost like a cell phone, in other words if there is no sound coming

Hello all, I have a new Carrier Access Adit 600 and am having a problem dialing out and receiving incoming calls. After the initial ring, the calling party will here nothing. There is a silence, but the SIP phones that is supposed to ring will ring. The calling party will not hear the sound of the ring that * sends out on the line. Additionally, if someone picks up the receiver there is no

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

I had an NA in one row of my data frame, so I called na.omit(). But I do not understand where that row disappeared to. >fri=na.omit(fri) > fri Date.Only DAY Hour Min15 Quarter Arrival.Val Arrival4 1 09/05/2008 Friday 8 33 3 32 8 2 10/24/2008 Friday 21 86 4 28 7 3 10/31/2008 Friday 8 33 4 20

Dear R users, I'm a bit perplexed with the effect sort has here, as it is different on Windows vs. linux. It makes my factor levels and subsequent plots different on the two systems. Given: types <- c("PC-D-Euro-0", "PC-D-Euro-1", "PC-D-Euro-2", "PC-D-Euro-3", "PC-D-Euro-4", "PC-D-Euro-5", "PC-D-Euro-6",

Hi! how do i get to the source code of kpca or even better predict.kpca(which it tells me doesn't exist but should) ? (And if anyone has too much time: Now if i got that right, the @pcv attribute consists of the principal components, and for kpca, these are defined as projections of some random point x, which was transformed into the other feature space -> f(x), projected onto the actual

The R script below gives values of 1 for all minimum values when I use a custom function in summaryBy. I get the correct values when I use FUN=min directly. Any help is much appreciated. The continuous information provided in this forum is fabulous as are the different R packages available. Rene # Simulated simplified data Subj <- rep(1:4, each=6) Analyte <-

Greetings, I have stumbled across some unexpected behavior (potential a bug) in, what I suspect to be R's (2.6.2 on Ubuntu Linux) t.test function; then again the problem may exist in my code. I have shutdown R and started it back up, re-run the code and re-experienced the error. I have searched on Google for the abnormal termination error message "(stderr < 10 * .Machine$double.eps *

Hi everyone, I am putting together an application in which each part of it was tested individually. Now that it is put together, I''m having problems... The one giving me problems is my "ImportController" which parses a CSV during post and puts it into my database. I have two separate CSV upload actions (one is for a bill called "bes" and the other from the provider

Windows 2012 R2 domain at highest level and one rhel6.5 samba server(3.6) Been throwing everything at this for the last few days. I can join to the domain and create ACL enabled shares but this one command I am struggling with. $ net rpc rights grant 'BES\Domain Admins' SeDiskOperatorPrivilege -Uadministrator Enter administrator's password: Could not connect to server 127.0.0.1

I was just setting a Windows Vista machine up on my network and have the following problems. If the user logs into the domain, then there are no network drives showing. It is as if the script is not executing. If I logon locally with an administrator and then run '\\server-name' to get a list of drives, I can see them but nothing shows up in any of them except for two of the shares

Was wondering if someone could tell me if this is correct. I want to set up some DFS shares. I have 3 servers with SAMBA/LDAP on them. My first is basically my PDC and the other two are my BDCs. I assume that I will have to set all of this up on each server, so that no matter which server catches the logon, the logon script will get run. Also, if one of the servers was to go down for a

Hello, I am new at ssh, think it is a simple config problem, but have not found the error. Wenn I connect from an client (winpc vai cygwin) to server A (hpup) the connectionon and xlogo ist okay. Wenn I connect from the same client to server B I got the following error message. The problem is only by starting xlogo, the connection via ssh to Server A+B ist okay. The sshd_config on server a+b is

My OS in linux. my local ip address is 192.168.1.1 I'm currently running icecast from my comcast ip address 68.50.209.120. But if I try to connect to the stream via 192.168.1.1 I get 404 Entity Not Found The requested file or stream was not found on this server. Thanks, Aaron <p>On Fri, 2002-09-13 at 17:14, zeek wrote: > > What OS is the system? What is the IPaddr? > >

What OS is the system? What is the IPaddr? Do: ifconfig -a netstat -nr <p>-zeek > -----Original Message----- > From: owner-icecast@xiph.org [mailto:owner-icecast@xiph.org]On Behalf Of > P. Aaron Lott > Sent: Friday, September 13, 2002 5:04 PM > To: Maria Wright > Cc: icecast@xiph.org > Subject: Re: [icecast] multiple shout streams > > > I'm running

I'm running multiple instances of ices. Also, I found what the problem was with the constant stream. I was getting a default stream because I was using my local ip address to run the server, and when I tried to access the different streams from my outside ip address something got confused. I'm running it from my outside ip address and everything works fine. Does anyone know a what to run

I have a file in stata format, which I have read in, and I am trying to create a text file. I have exported the data using various delimiters, but I'm unable to read it back in. I originally read in the file with: library(foreign) myData <- read.dta("mydata.dta") I then exported it with write.table using comma, tab, and exclamation marks as a delimiter. When I was unable to

Hi, I'm trying to figure out how to have mulitple shout streams running on my icecast server. I'd like to have it setup like http://192.168.1.1:8000/classical plays classical http://192.168.1.1:8000/pop plays pop etc. Thanks, Aaron -- palott@math.umd.edu http://www.math.umd.edu/~palott LCV: IPST 4364A (301)405-4865 Office: IPST 4364D (301)405-4843 Fax: (301)314-0827 P. Aaron

Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the command line. The slots (3 fxs) are configured with 'ls' signaling. I configured the T1 card with the same line settings as the T1 interfaces on the adit and I get green lights on both the T1 card and the T1 interface on the adit (so

Hi! The kernlab function kpca() mentions that new observations can be transformed by using predict. Theres also an example in the documentation, but as you can see i am getting an error there (As i do with my own data). I'm not sure whats wrong at the moment. I haven't any predict functions written by myself in the workspace either. I've tested it with using the matrix version and the