similar to: Problems with * and Grandstream Budgetone 100

I'm trying to get call parking to work, but I've run out of things to try. I can place a call between two internal extensions, then on one extension transfer the call to extension 700, and the call gets parked on 701 but I don't hear the extension number when I do the transfer. I can hangup and call 701 and get the call back. Here's what I see: (comments added on lines starting

Hi, Does anybody know how to properly execute a transfer (without using the |Tt option) from a GS100? Scenario: 1. I call from X-PRO (ext 1100) to Grandstream (1101). 2. Grandstream answers. Call is established. 3. Press [TRANSFER] on the Grandstream. X-PRO caller is put on hold. Grandstream gets dial tone. 4. Grandstream dials 1103 (the extension of another GS100). 5. Grandstream hangs

I can't seem to make the "Hold" button function on the GS BudgeTone-100. I'm trying a procedure like this: 1) On a call 2) Press "Hold" button 3) Hang up phone What I expect is for the call to go on hold until I pick up the receiver again. (Like my SPA-2000's, except it's a flash, but I can hang up the phone and the call waits there for me to pick it up

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

G'Day All, How do I fix this: I receive a call at the extension. Press the hold button. Music on hold starts. When I place the handset back on the cradle, the call gets hung up/disconnected. The Phone is A GrandStream Budge Tone 100. Thanks

I'm using 1 BudgeTone 100 IP Phone and a Sipura 2000 for all my old analog phones. The analog phones with the Sipura seem to work great. Voice quality is fine on both ends on the Sipura. I'm using the Teliax service and I use the Ulaw codec for all phones. However, I'm struggling with the BudgeTone 100. On my end, I find there is lot's of voice cut outs. I'm told my

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are

I have a strange problem in that I have put a budgetone out on the internet that connects to my * server that's behind a firewall. They can call me I can call them and it works fine. However, I have setup a link to sipdiscount on my * server. If the budgetone user calls via my * box to sipdiscount all the budgetone user hears is silence and the called person hears silence as well when they

Just for the record and to possibly help with others who get BudgeTone phones. My asterisk box is behind NAT, and I use Vonage, NuFone, and iconnecthere for my "POTS backhaul." On the front end I have an ATA186, a Digium TDM20, and now a BudgeTone 102. The BudgeTone definitely has issues wrt the RTP stream and NATting, although unfortunately I haven't yet been able to dig

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hi, Just playing with a couple of Budgetone 102 phones and they are pretty good for the price. The only problem i'm having at the moment is when I get a voicemail on the Asterisk box the LCD flashes. Dialing *98 goes to the VoiceMail Manager, and asks for mailbox, I enter 201, then asks for password, enter my voicemail password set in the Extensions -> webadmin, then hit the

Hi, I'm considering giving the Grandstream BudgeTone-102 phones a try. I've been using Cisco 7960's to date, but the low cost of the Grandstream phones are hard to ignore. I have two questions: 1) Does the message waiting indicator on the BudgeTone's work with Asterisk? 2) The one line 12-digit LDC concerns me a bit. Is the LCD able to display both the CID number and name on

Hi. I was wondering if there's a way to do supervised transfers on the budgetone 102 . Blind works ok, but can't do supervised. I thought that with the flash button that could be possible, but seems I'm wrong .... matteo.

I have found that the NTP server is not contacted when the phone (Budgetone 100) comes back from a power down. I must reboot the phone without powering down to get the phone to contact the NTP server for the time. It doesn't matter whether I reboot from the phone's web site or using the menu reset function: either works. I have only tested this with a private NTP server. This may

I inadvertently unplugged my Budgetone phone tonight and I think it went out and upgraded its firmware. It is now at 1.0.3.81. Does anyone know how new this might be? Suddenly things that have been working wonderfully before don't work--basically it seems to do the SIP stuff just fine but then all the RTP stuff breaks, even something as simple as retrieving my voicemail from a server on

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Hey guys, I have a problem with my BudgeTone. It ignores calls after being online with my asterisk server for an extended period of time. I know this problem has been posted on this list before. Honestly, I searched the archives but couldn't find the previous posts. Was there ever a solution to this problem ? My firmware version is the latest: 1.0.5.11. Once again, I apologize for posting

Hello, I have been working on getting Asterisk up and running with a couple Grandstream hard phones (Budgetone 100s) and a couple softphones. Things work pretty well but we have discovered an odd problem. A calls B and then A can put the call on hold and pick it back up. A calls B and B can put the call on hold but cannot pick it back up. These tests are internal on the hard phones. The

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully