similar to: PRI dead in USA?

Hi- Anyone using the Junghann's quad BRI card and the Digium E100P in the same system? I'm having a configuration problem where I can configure the cards one at a time (with the appropriate drivers loaded) in a system, but when I try them both together, neither will work. They both work fine one at a time. Probably has something to do with the channel numbering. I've tried

asterisk-users-admin@lists.digium.com wrote: > It's running Debian Sarge with the stock 2.4.26 kernel (I > know it's still an "unstable" release, but I'd need to jump > through all sorts of hoops to get Woody working properly). I wouldn't make a fuss about this. sarge is at least as good as woody and much more up to date for the stuff asterisk can do /

Hi all- Over the past week or two, I've been trying out asterisk under Fedora 1 Linux (RedHat). In my setup (single and dual Xeon motherboards), I have so far had a very good experience in terms of performance. In doing E1 load testing, I've found that Fedora handles heavy load much better than RedHat9, probably because of its better use of the multi-threading capabilities of the Xeon.

Hi- I have an upcoming application that requires use of PRI channels that are primarily used for high-volume incoming traffic, but that are to be used for outbound calling as well. Of course, one option is to have dedicated outbound channels reserved, but this is an inefficient use of channel resources. Normally PBX's are designed to have the CPE yield to an incoming call if a particular

Hello- Is it possible to set the CDR record field called "accountcode" from within the dialplan? Or is there another way to cause this field to be set, preferably without using AGI code. Thanks Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England www.evtmedia.com

Hi- I'm almost embarrassed to ask the following simple question, following John's excellent and rigorous bandwidth analysis (see earlier thread): I have a straightforward Asterisk application, IVR-only (no connections between channels). It will simply decode DTMF's and speak prompts (probably A-Law encoded) on a number of E1 circuits simultaneously. Realistically, how many

Hi all- It's often mentioned here that recompiling the Linux kernel may improve the performance of asterisk. My question is: Does re-compiling the kernel have any effect if there are no changes to the configuration? What parameters will typically improve performance? Thanks for any insight! Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London,

Hi, I have resources available to host a portal specifically for the Asterisk system, to help correlate documentation, FAQ's and How To I am new to Asterisk, and my hardest work is in locating information on using or configuring the software. Would Mark, John or any of you feel this would be of benefit to host? I am offering a PHP-NUKE portal for this, (Unless you know of a better

Hi all- Thanks to Mark Spencer for finding this patch: If you are experiencing leftover zombie processes from your AGI scripts that have terminated, this is apparently due to a RedHat 9 threading issue introduced in a recent update.... To get rid of this, try entering the following line before you start asterisk: export LD_ASSUME_KERNEL=2.4.1 It works for me - I'm still checking to

> The documentation mentions that the Digium channels can be split into some > voice channels and the remainder of the channels used for routing IP > traffic. > > Does any one have this in use in conjunction with Asterisk? Does it work > well? Would you recommend it for a production server? > > Obviously, if this works, this makes for a cost effective platform where

Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31

Hi- I have an upcoming order for a bunch of asterisk boxes, and I'm considering using an "assembled" package for the server, instead of building them from components as I usually do. Does anyone have experience with the Dell PowerEdge 750 server, or any other 1U rackmount server for use with asterisk? Thanks in advance Scott Stingel Scott M. Stingel President, Emerging Voice

Hello- What is the .gsm format? Ie: what's the encoding method and sample rate please? Thanks Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: scott@evtmedia.com URL: www.evtmedia.com

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

Update on this problem: I gave up on the "native" h.323 because, like others, I couldn't get audio working. (yes, I tried disabling FastStart in ast_h323.cpp - no change) So I went and got the OH323 code from www.inaccessnetworks.com. Glad to say that everything seems to work so far. Not only does audio work, but even the handshaking is now working in both OpenPhone and even

Many of you are familiar with how lousy Festival sounds. AT&T has a product, NaturalVoices, that sounds much better. There are male & female voice fonts for US/UK/Indian English, French, Spanish, and German. I am considering offering a linux-based text-to-speech engine based on the NaturalVoices runtime. An asterisk module would also be provided, making it easy to add natural sounding

Hi- I'm looking for an appropriate system board to power a system with two (2) Digium TE410P cards. Since these cards require the 3.3 volt PCI, I'm considering vendors like Tyan for the motherboard. Can anyone please tell me their experiences with the Tyan i7501 series (Xeon-basd), or recommend an alternate motherboard? Thanks Scott Scott M. Stingel Emerging Voice Technology Inc.

Hi, Do the callers in USA dialling from USA Telco lines always have to prefix the CITY/AREA code with "1" in order To successfully make a call to other USA destinations? ---- I have not been to USA (yet) :) Ta SJ

Hello, We have one production server that is identically configured to another production server except for the fact that they each use a different type of digium quad T1 card(one has T400P and one has TE405P). The server with the 405 has been developing delay problems with Sipura SPA-2000 phone adapters after a call has gone on for 15-30 minutes (up to 1 second audio delay). I asked Sipura and

I'm having difficulty getting a PRI working between asterisk and a Merlin Legend. I have been attempting to get it going as esf, b8zs & 5ess (although I have tried other switchtypes...). I found the following info in the Legend docs: If the switch type is 5ESS, the protocol MUST be set for ATT Custom. If switch type is DMS-100, the protocol MUST be set for NTNAPRI The README in