similar to: Rederecting an incoming CAPI call to SIP soft phones

Good day, The unusual thing about this problem is that it doesn't occur just during a CAPI call, or just during an IAX/SIP call. Only during IAX/CAPI I'm having some trouble with the CAPI interface and it only occurs when a call comes in on an IAX channel and goes out the CAPI interface. The capi debug in the asterisk console is below as well as the relevent parts of .conf files from

Hello, i have asterisk with chan_capi ( AVM Fritz card ) working, isdn line BRI, setup to point-to-multipoint. working fine, but when both channel on interfaces are used and somebody wants to call in - the response is "ha-la-li" - sounds like msn or called number does not exists. i think that right response should be - line busy tone... right ? can anybody tell me what is wrong ?

Hi, i was able to solve my problem. During my playing around with * and capi i changed several options in config files. I did this while my * was running. To test if my changes where successful i entered "reload" on * console. This didn't help. But after i stopped asterisk and startet it again, everything worked perfect. So it seems that doing a reload while asterisk is running

Hello List, because this is my first post to this list, i'd like to introduce myself. My name is Thorsten M?ller, 26 years old and live near Frankfurt/Main in germany. Okay, now to the reason for this posting: I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686) with AVM ISDN Fritz PCI card (passive). I followed the configuration on http://voip-info.org and the

Hallo all, I am trying to get * with chan_capi and a ptp-ISDN with 4 lines on a AVM C4 card to work. But weather inbound nor outbound is working :( My capi.conf: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=8993 incomingmsn=* mode=immediate controller=1,2,3,4 softdtmf=1 ;accountcode= context=demo

Hi all, I've recentrly starting to play around with *, when all I wanted is to configure an fritz ISDN card with A@H. Currently I'm stuck at the phase of what do I do with capi after everything is installed. I'm trying to understand how to setup incoming and outgoing calls at A@H since I'm getting a bit lost with the default dial plan. It seems that * answers but disconnect

it is possible to use musiconhold. i added exten => s,5,SetMusicOnHold,default exten => s,7,dial,SIP/michael&SIP/frank|15|m to the extension conf. the logfile looks good, i think -- Called michael -- Called joern -- Started music on hold, class 'default', on CAPI[contr1/9999] -- SIP/192.168.100.150:5060 is ringing -- Stopped music on hold on CAPI[contr1/9999] --

I have an asterisk installation connected to 2 isdn lines via an AVM C2 card. modules seems to load well, lsmod gives : c4 19588 4 b1 24192 1 c4 capidrv 28468 2 isdn 134604 9 capidrv slhc 7552 1 isdn capi 18112 4 capifs 6024 2 capi kernelcapi 46112 4

Since upgrading from stable to latest cvs I can't place CAPI calls (AVM Fritz/chan_capi-0.3.1) Did I miss something that has to be changed in configfiles? Also tried to recompile chan_capi which run into an error. capi info shows me: Contr1: 2 B channels total, 2 B channels free. Any suggestions to these logfile snippets jo ---------------------------- * to ISDN -- Accepting

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP

Hello, I have som problems with my BRI/capi setup. I manage to call in to the system (some rows below). ---------------- -- Executing Dial("CAPI[contr1/16453]", "SIP/BYEXTENSION@janm|10") in new stack -- Called s@janm -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing ---------------- But I can't make outgoing calls from

Hi, after having read so much about Asterisk, I went on and tried out to create a little sample-setup. I'm using a Fritz Card USB with the AVM Capi Driver and two X-Lite Softphones. Dialing between the softphones makes no problem. Calling the MSN fron an external phone also works. I'm getting to the asterisk demo-voicebox which works flawlessly. Now may next step has been to enable

Hi everyone, Hi, I am new to the ISDN world, today I received my new NT box from CS Telecom but unfortunately it doesn't work. I have installed all the drivers and when I issue a "capiinfo" I get: -------------------------------------------- Number of Controllers: 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.101-02(49.18) Serial Number:

Hi, i will use an AVM C2 controller with asterisk. How can i use both card ports ?? On the voip-info.org Wiki is only notice to: You will need a section for each controller in /etc/asterisk/capi.conf so the C2 will have 2 sections. But how is look like this ? Only on the first port is asterisk assume connections, but nothing on the second card port. In the dmesg is only the capidrv-1 shown,

I've the following setup : sip phone -> ser (auth and routing) -> asterisk with capi isdn when I call a pstn number everything works fine, but I can't hear anything till the called answer. this is the output from a test call : -- Executing Playtones("SIP/2.7.184.61-08152880", "dial") in new stack -- Executing Dial("SIP/2.7.184.61-08152880",

Hello all, I'm trying to get CAPI to work with two B channels (AVM B1 PCMCIA) on a P4 2GHz (linux kernel 2.4.21) system. All are ok with just one B channel. But when I open a second B chan, the sound is choppy, with too long gaps, and the CPU load is too high (~50%). On the Asterisk's console I get these messages: -- Executing Dial("H323:4478",

Hi, I'm new to asterisk and try to get it work with capi.so. When I try to start asterisk with "asterisk -vvvvc" I get the following errors. I couldn't find any hint on the net what may be wrong in my configs. Has anybody got a hint? Here is the error output: [capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Jun 23

Hello, I am trying to configure asterisk 1.0.7pre to get incoming calls from an ISDN line using an AVM fritz PCI 2.0 with Chan_capi 0.3.5. My problem is that the context is not recognised in the /etc/asterisk/capi.conf I have in /etc/asterisk/capi.conf 's section "[interfaces]" the following directive context=isdn and the following directive in /etc/asterisk/extensions.conf in

Hi, i want forward a call witch is comming over isdn (avm b1 witch i have) out to isdn (same card 2. b channel). The call is comming (one b channel open one is free) the forwarding is processed (snom 200) all seems correctly. Then the message that the b channels all busy, but so is it not. Forwarding to a sip phone works. Can anyone help me with that ? nicolas SNIPS: ------ ==

Hi, I?ve strange problem when I?m making a call from SIP (Cisco 7960) to capi (Fritz PCI). When I call a national number, I?m hearing the ringtone when the called party is ringing but when I call an international number, I don?t hear the ringtone and I?ve a silence until the called party answers. Both call are going through the same extension. Here?s 2 log files, one with a national number and