Hello,
i have asterisk with chan_capi ( AVM Fritz card ) working, isdn line
BRI, setup to point-to-multipoint.
working fine, but when both channel on interfaces are used and somebody
wants to call in - the response is "ha-la-li" - sounds like msn or
called number does not exists. i think that right response should be -
line busy tone... right ?
can anybody tell me what is wrong ?
regards Marian
this apear in log :
Oct 22 09:22:36 NOTICE[49156]: File chan_capi.c, Line 1813
(capi_handle_msg): CONNECT_IND ID=001 #0x4f00 LEN=0053
Controller/PLCI/NCCI = 0x301
CIPValue = 0x1
CalledPartyNumber = <c1>5430754
CallingPartyNumber = <01 83>0903517715
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <02 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1832 (capi_handle_msg):
received a call waiting CONNECT_IND
Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1930 (capi_handle_msg): did
not find device for msn = 5430754
Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to
find a pipe for PLCI = 0x301 MN = 0x4f01
Oct 22 09:22:36 NOTICE[49156]: File chan_capi.c, Line 1211 (pipe_msg): INFO_IND
ID=001 #0x4f01 LEN=0023
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x70
InfoElement = <c1>5430754
Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to
find a pipe for PLCI = 0x301 MN = 0x4f02
Oct 22 09:22:36 NOTICE[49156]: File chan_capi.c, Line 1211 (pipe_msg): INFO_IND
ID=001 #0x4f02 LEN=0016
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x18
InfoElement = <80>
Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to
find a pipe for PLCI = 0x301 MN = 0x4f03
Oct 22 09:22:40 NOTICE[49156]: File chan_capi.c, Line 1813 (capi_handle_msg):
CONNECT_IND ID=001 #0x5097 LEN=0053
Controller/PLCI/NCCI = 0x301
CIPValue = 0x1
CalledPartyNumber = <c1>5430754
CallingPartyNumber = <01 83>0903517715
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <02 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
Oct 22 09:22:40 ERROR[49156]: File chan_capi.c, Line 1832 (capi_handle_msg):
received a call waiting CONNECT_IND
Oct 22 09:22:40 ERROR[49156]: File chan_capi.c, Line 1930 (capi_handle_msg): did
not find device for msn = 5430754
Oct 22 09:22:40 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to
find a pipe for PLCI = 0x301 MN = 0x5098
Oct 22 09:22:40 NOTICE[49156]: File chan_capi.c, Line 1211 (pipe_msg): INFO_IND
ID=001 #0x5098 LEN=0023
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x70
InfoElement = <c1>5430754
Oct 22 09:22:40 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to
find a pipe for PLCI = 0x301 MN = 0x5099
Oct 22 09:22:40 NOTICE[49156]: File chan_capi.c, Line 1211 (pipe_msg): INFO_IND
ID=001 #0x5099 LEN=0016
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x18
InfoElement = <80>
Oct 22 09:22:40 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to
find a pipe for PLCI = 0x301 MN = 0x509a
Oct 22 09:22:58 DEBUG[901149]: File channel.c, Line 2245 (ast_channel_bridge):
Didn't get a frame from channel: H323:6083
Oct 22 09:22:58 DEBUG[901149]: File channel.c, Line 2313 (ast_channel_bridge):
Bridge stops bridging channels CAPI[contr1/5427980]/9 and H323:6083
--
SUNTEQ s. r. o.
Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic
Tel: +421-46-5430 754 # Fax: +421-46-5439 144
http://www.sunteq.sk/
------------------------------------------------------------
A mind is like a parachute... it only works when it's open.
