Hi Jan,
you didnt read the README, did you? :-)
your dialstring is missing many things. a valid example would be:
exten => s,1,Dial,CAPI/1234:b${EXTEN}
where 1234 is the ougoing MSN configured in capi.conf (msn=1234....)
with capi you dont need zaptel.
regards
kapejod
--
Klaus-Peter Junghanns
CEO,CTO
Junghanns.NET Internet-Services & Software-Development GmbH
Breite Strasse 13 - 12167 Berlin - Germany
fon: +49 30 79705392
fax: +49 30 79705391
mobile: +49 160 7503372
email: kpj@junghanns.net
Am Die, 2003-05-06 um 14.25 schrieb Jan Mvrn:> Hello,
>
> I have som problems with my BRI/capi setup. I manage to call in to the
system (some rows below).
> ----------------
> -- Executing Dial("CAPI[contr1/16453]",
"SIP/BYEXTENSION@janm|10") in new stack
> -- Called s@janm
> -- SIP/janm-63f5 is ringing
> -- SIP/janm-63f5 is ringing
> -- SIP/janm-63f5 is ringing
> ----------------
>
> But I can't make outgoing calls from my SIP phones.
> ----------------
> -- Executing Dial("SIP/janm-088c", "CAPI/contr1") in
new stack
> == data = contr1
> == capi request omsn = contr1
> NOTICE[622607]: File chan_capi.c, Line 883 (capi_request): didn't find
capi device with outgoing msn = contr1. you should check your config!
> NOTICE[622607]: File app_dial.c, Line 476 (dial_exec): Unable to create
channel of type 'CAPI'
> == Everyone is busy at this time
> ----------------
> My exten example:
> exten => _XXXXXX,1,Dial,CAPI/contr1/BYEXTENSION
>
> Some questions:
>
> 1. Do I need to configure/use zapata.conf when I using capi (there is no
signalling called "BRI")?
>
> 2. How do I configure the BRI channels?
>
> 3. Is there anyone using an Eicon BRI with capi that could give an simple
example outgoing extension line? (or know of some fine BRI/capi/*
examples/documentation?)
>
> regards,
> ---Jan M?rn---
> ________________________________________________________
> This message is written with recycled letters.
>
> Jan M?rn PHONE: +358 (0)18 539 226
> IT-ingenj?r FAX: +358 (0)18 539 250
> Kraftn?t ?land AB GSM: +358 (0)40 8445 390
> PB 71, 22101 Mariehamn E-MAIL: jan.morn@kraftnat.aland.fi
> Web: www.kraftnat.aland.fi
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
Hello,
I have som problems with my BRI/capi setup. I manage to call in to the system
(some rows below).
----------------
-- Executing Dial("CAPI[contr1/16453]",
"SIP/BYEXTENSION@janm|10") in new stack
-- Called s@janm
-- SIP/janm-63f5 is ringing
-- SIP/janm-63f5 is ringing
-- SIP/janm-63f5 is ringing
----------------
But I can't make outgoing calls from my SIP phones.
----------------
-- Executing Dial("SIP/janm-088c", "CAPI/contr1") in new
stack
== data = contr1
== capi request omsn = contr1
NOTICE[622607]: File chan_capi.c, Line 883 (capi_request): didn't find capi
device with outgoing msn = contr1. you should check your config!
NOTICE[622607]: File app_dial.c, Line 476 (dial_exec): Unable to create channel
of type 'CAPI'
== Everyone is busy at this time
----------------
My exten example:
exten => _XXXXXX,1,Dial,CAPI/contr1/BYEXTENSION
Some questions:
1. Do I need to configure/use zapata.conf when I using capi (there is no
signalling called "BRI")?
2. How do I configure the BRI channels?
3. Is there anyone using an Eicon BRI with capi that could give an simple
example outgoing extension line? (or know of some fine BRI/capi/*
examples/documentation?)
regards,
---Jan M?rn---
________________________________________________________
This message is written with recycled letters.
Jan M?rn PHONE: +358 (0)18 539 226
IT-ingenj?r FAX: +358 (0)18 539 250
Kraftn?t ?land AB GSM: +358 (0)40 8445 390
PB 71, 22101 Mariehamn E-MAIL: jan.morn@kraftnat.aland.fi
Web: www.kraftnat.aland.fi
> I have som problems with my BRI/capi setup. I manage to call in to thesystem (some rows below).> ---------------- > -- Executing Dial("CAPI[contr1/16453]", "SIP/BYEXTENSION@janm|10") innew stack> -- Called s@janm > -- SIP/janm-63f5 is ringing > -- SIP/janm-63f5 is ringing > -- SIP/janm-63f5 is ringing > ---------------- > > But I can't make outgoing calls from my SIP phones. > ---------------- > -- Executing Dial("SIP/janm-088c", "CAPI/contr1") in new stack > == data = contr1 > == capi request omsn = contr1 > NOTICE[622607]: File chan_capi.c, Line 883 (capi_request): didn't findcapi device with outgoing msn = contr1. you should check your config!> NOTICE[622607]: File app_dial.c, Line 476 (dial_exec): Unable to createchannel of type 'CAPI'> == Everyone is busy at this time > ---------------- > My exten example: > exten => _XXXXXX,1,Dial,CAPI/contr1/BYEXTENSION > > Some questions: > > 1. Do I need to configure/use zapata.conf when I using capi (there is nosignalling called "BRI")? Nope, you don't need zapata.conf for capi, you only need capi.conf. There is an example of capi.conf in chan_capi, `make config` copies it to your /etc/asterisk dir.> 2. How do I configure the BRI channels?Check the sample capi.conf and the README of chan_capi, it's all there.. Your exten in extensions.conf is wrong, it should look like this: exten => _XXXXXX,1,Dial,CAPI/123456:BYEXTENSION Where 123456 is the msn you assigned to a controller in capi.conf.> > 3. Is there anyone using an Eicon BRI with capi that could give an simpleexample outgoing extension line? (or know of some fine BRI/capi/* examples/documentation?)