similar to: Feature request for integrating an OSS (Operations Support System) and Asterisk

Greetings folks, I'm currently dealing with a company to let me set Caller-ID-Name on outbound calls. So far pretty happy with their services. The basic service works like this: * CLEC sets Point Code to point to this company * CLEC has to sign LOA saying they give me permission to set the Caller-ID-Name through this company. * I go into web interface and set name. However, the CLEC is

Using a SIP connection with a CLEC, the downstream (received) audio is perfect when the mute button is activated on the phone. However, when there is upstream audio (i.e., talking or even breathing into the microphone), the downstream audio is cut off. It's kinda like having a half-duplex audio connection. When I divert outgoing calls to another provider, these calls are fine.

I have the following configuration: CLEC -> T-1 -> Asterisk -> Adtran Channel Bank -> (analog) -> Nortel Don't complain that it's ugly. I've already done plenty of that. The CLEC manages their Adtran remotely and needs to be able to continue to do so. I assume they use FDL to do the management. We are using the Zaptel DACS/DACSRBS to cross connect some of the

Does anyone know of a device that will take an SS7 link and convert it to a PRI? -- respectfully, Joseph - (606) 477-2355 x140 ------=============

I have just finished installing a new asterisk box at my work. The box is quite hefty, dual Zeon 2.8s with SCSI drives and 2Gb of memory. I have a 4 port Digium T1 card for channel bank and PRI access. I activated a PRI from a local CLEC (DMS-500 based, National protocol). This PRI is on slot 2 of the card and is set as the primary timing source. It is ESF/B8ZS. All the software is latest

Hi all, I am trying to setup a ZAP interface to do MF signaling for a handoff to a 911 tandem. The signaling I need to perform on the T1 is this: 9-1-1 Tandem: Wink CLEC end office: KP (Keypulse) NPA ST (Start) 9-1-1 Tandem: Wink CLEC end office: KP I (Info Digit) NXX XXXX ST As I'm not as familiar with the Zaptel configurabliity, I'm not really sure how to do this. Do I dial twice

Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd accept just our DDI if that was all I could get. Steve -----Original Message----- From: Storer, Darren [mailto:starusers@comgate.tv] Sent: 01 July 2004 09:35 To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID Hi Steve,

I''ve got a couple apps that I use (billing app, support ticket app, some other custom apps) that I want to integrate into one site. They will all use the same layout for the most part, and will link between each other. When I initially thought of doing this, I figured if I put the apps at different roots - /billing /support etc - then the links wouldn''t work at all, because

I'm brand new to asterisk but not to T1s so here's my bit to contribute. Each local telco {be they ILEC or CLEC} is different depending on their CO switch and the software options they've purchased for it. In Alaska, the "break-even" for switching from POTS to T1 is about 13 trunks. Your telco will offer "regular T1" and/or ISDN-PRI. Up here the tariffed rate

Hi, Inspired by a recent rant about one particular provider, I am getting very curious about something I've never mastered. I'd like someone to explain this here or at least post a link or two that can educate me and probably countless others who have no knowledge in this area. I'm sure there are several of you reading this that know all about the subject. What are the various

Skipped content of type multipart/alternative

OK.. I'm up to my eyes in LD BS! I can't for the life of me understand how any carrier, either VoIP or traditional service provider can make heads or tails of how to hand off an * based call to an LD provider. Every provider I talk to, says I have to have a traditional T1 put in to their respective networks. I don't want to do this. I want a LD provider that can take a IP, SIP, IAX

My CLEC just called and asked if we will support the "MI2" protocol on our proposed T1 circuit. I think this is for CallerID name. Will the T100P support this? Thanks, Mike

Central business location has a PRI with a CLEC. Remote offices access the PRI for all voice traffic via VoIP. How does one get the telco to report the address of a remote office to the 911 call center when the call is made from that respective location?

My client would like to add new functionality, such as call queuing, to their PBX. They presently have a Telrad PBX; it has a T1/PRI circuit from the CLEC and a few POTS lines. They use DID for some incoming calls and an attendant for calls on the main number. The client's commitment to customer service will not allow us to outright replace their PBX with a new system--we could never

I'm in the process of turning up a PRI in one of my markets and have run into a problem I have never seen before. I am unable to place a local outgoing call. Long Distance over the same PRI works fine. When I attempt to place a local call using the PRI I see Asterisk attempt to dial, and am greeted with a busy signal. This signal appears to originate on the telco's switch. I have had

I want to test asterisk with its DID functions on a smaller scale without the expense of a PRI. I am in the US, and want the most reliable/stable, and feature rich solution that I can have. What ISDN card would be reccommended? My clec switch operator says he can/will send DID info to my BRI's if I wish. Can Asterisk, or one of its addons support this? What BRI solution would be

Hi all, Newbie quest here. I have 3 PSTN lines (2430-2432) setup by the CLEC in a hunt group coming in to a TDM04B and 3 Grandstream gxp-2000's (say a,b and c) and Asteriskathome installed. I want all phones (a,b,c) to be able to take calls from the hunt group. Does this mean I must make 9 SIP extensions on * ? 3 for each IP phone? and group them in trtiplets (ring groups?)

Check out the proposed prices when this is approved. BELL CANADA REPORT ON THE ECONOMIC EVALUATION FOR THE TARIFF REVISION OF Bell Canada's Access Services Tariff Item 315 ? Zero-Dialed Emergency Call Routing Service (0-ECRS) *2 March 2006 TABLE OF CONTENTS Page 1.0 GENERAL 3 1.1 Purpose of the Study 3 2.0 SERVICE DESCRIPTION 3 2.1 Service Characteristics 3 2.2

Hey folks, I have a T100P card with a PRI; when doing outbound dialing over the PRI, I can use SetCIDNum(2024561414|a) to force caller ID to display as "The White House" on a land line. This is apparently done as a reverse lookup by Verizon, as I do not hand the PRI the words "The White House" -- 202-456-1414 is an actual White House number. Using SetCIDName("Flying