similar to: generate dial tone

On systems even key systems it is customary to have an 'internal' dial tone. Since Asterisk simply ignores the 9 and keeps the tone going it is hard to tell for some 'new users' if they can make a call. My first idea was to change the generated dial tone via source. Then if the user presses 9 go to a different context where I would record about 30 seconds of the normal dial

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

Guys.. Im new to asterisk but is it possible to simulate a dialtone for example, in other PBX when you pick up the phone you can hear a certain dialup, which is the PBX dialtone, and when you hit 9, you can hear the PSTN dialtone, is this possible? __________________________________________________________________ Anton Krall

Hi, si posible on SIP phones to have the dial tone after 9 like on the FXS card? I set ignorepat => 9 on my extensions.conf... Best regards, Chris HARIGA

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

Any way to get the Asterisk to do the "broken dial tone" on phones that have voice mail in their mailbox? Similar to the phone company's built-in voice mail - awh

Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the command line. The slots (3 fxs) are configured with 'ls' signaling. I configured the T1 card with the same line settings as the T1 interfaces on the adit and I get green lights on both the T1 card and the T1 interface on the adit (so

Is it possible to get an internal dial tone when I call to my asterisk and enter password? I would like to call my line enter extension - password - and get internal dial tone. once I'm in I would like to dial based on what context permits, mostly long distance calls VOIP. I can not preset the extension to certain number as I don't know what number I will be dialing. -- #Joseph

Hi: I have asterisk-1.4.0 with zaptel 1.4.0 and TDM40P on my server ,when i made modprobe wctdm the fxs modules is lightened but there is no dial tone came from it . Can i get some help please. Best Regards; Wassim _________________________________________________________________ Windows Live Spaces is here! It?s easy to create your own personal Web site. http://spaces.live.com/signup.aspx

New system install. At what point, in bootup, should I be able to get a dial tone on the phone ports on a tdm400p? There are two fxo and two fxs ports. I know which to plug into <g>. At boot up, as soon as wctdm is loaded, all the ports "go green, yet I do not get a dial tone on the phone ports. I thought as long as zapata.conf is correct, the board should be

once u press 9 is there a way to make it so it restores dial tone, like most pbx's do? so dial tone , 9, dialtone, then ur local num -- Gafachi.com - referal code hunter81 instant iax termination - 2 cents a minute Also they have a great referal program, tell them jacob, hunter81 sent you -------------- next part -------------- A non-text attachment was scrubbed... Name: not available

Hi, I'm trying to dial out on a vonage line connected to a zap channel using stuff like: exten => 200,1,Dial(Zap/2/${EXTEN}) but it doesn't work - when i dial in the extension, i can see on a phone connected to the same line that it's gone active - but there's no dialtone. also tried adding a wait period before accessing the line and exten =>

Hello all, I'm running Asterisk 1.4.5 and Zaptel 1.4.3 on Debian Etch i386 with the Digium's Dev Kit that comes with 1 FXO and 1 FXS. How do I configure my home PBX in such a way that whenever someone calls on my trunkline (PSTN) number, he/she will hear a customized ring tone, probably playing an MP3 file, instead of a boring standard ring tone while the extension number that is

Hi I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line) This card is setup as fxs_ks I was getting dial tone but suddenly no Dial Tone....Help appreciated.... When I try to route the Call using - Dial Zap/1) to this FXO Line I get this error: ------------------------------------- linux*CLI> -- Executing

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right

Dear List; Thanks alot for the help. But how can I let the second dial tone (after pressing the extension to select that FXO port) to be difference than normal dial tone? Regards Bilal Ghayad -------------------------- Correction, on FXO port not FXS, second, read his email first: "Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP

Hello, Here's what I'd like to do: call my Asterisk box from a phone, hangup after a few rings, then Asterisk calls me back and presents a dialtone, than I can dial any valid number in the context the call originated. I've done it with CAPI (thanks to the script on http://www.junghanns.net/asterisk/page14.html), I'd like to do it with H323. Problem is, how to present a