Displaying 20 results from an estimated 1000 matches similar to: "CAPI / Channels"
2005 Jan 04
3
AVM C2 capi.conf ?
Hi,
i will use an AVM C2 controller with asterisk.
How can i use both card ports ?? On the voip-info.org Wiki is only notice
to:
You will need a section for each controller in /etc/asterisk/capi.conf so
the C2 will have 2 sections.
But how is look like this ?
Only on the first port is asterisk assume connections, but nothing on the
second card port. In the dmesg is only the capidrv-1 shown,
2004 Mar 30
2
CAPI problems when loading chan_capi.so
Hi all,
I compiled/installed chan_capi.so without problems. When I launch
Asterisk, I get the following error:
---
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif:
ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0
Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338
2004 Dec 23
2
Re: Asterisk and Capi
Dear list,
I tried to install the CAPI support RPM from the SUSE 9.2 disks. YaST
tells me it is happy with the process. The Asterisk release I am using is
the one that comes packaged in RPM format, also included in the distribution.
Still starting asterisk with the usual asterisk -vvvc I see that
something goes wrong.
[app_capiCD.so]Dec 23 19:21:45 WARNING[1076850816]: loader.c:242
2004 Dec 13
3
Busy message on ISDN cards?
Hi all,
I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :)
I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with
kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway
ISDN line. I'm pretty certain the card and line both work since
they've been used in this machine for PPP before this (but with an
older kernel with DoV
2004 Aug 06
2
Asterisk not starting
Hello!
Asterisk "CVS-HEAD-08/06/04-14:55:13" won't start on two of three different
Gentoo machines. This is the output of gdb:
ultra asterisk # gdb /usr/sbin/asterisk
GNU gdb 6.0
Copyright 2003 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
2004 Jan 16
7
CAPI not installed, after changed from i4l to CAPI
I had unexpected hangups from my asterix box using the i4l driver. (SIP
<-> SIP calls worked execellent, but SIP<->ISDN didn't.)
Then I changed the i4l driver in modem.conf with the chan_capi from
jungham. (http://www.junghanns.net/asterisk)
I followed his instructions in the INSTALL file, and first encountered
some errors compiling it. It help by deinstalling several
2004 Jun 07
6
chan_capi and DDI (Anlagenanschluss)
Hi all !
We have 3 NTBAs which are all going to our existing PBX. Our areacode is
06003 and our DDI enabled number 9141.
I want to exchange that PBX with Asterisk, but still struggle to get it
working.
My CAPI.CONF is currently like this:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.800000
txgain=0.800000
[interfaces]
context=in-capi
msn=60039141
incomingmsn=*
controller=1
2004 Apr 29
1
CAPI ptp does not work
Hallo all,
I am trying to get * with chan_capi and a ptp-ISDN with 4 lines on a AVM C4
card to work.
But weather inbound nor outbound is working :(
My capi.conf:
;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
mode=immediate
isdnmode=ptp
msn=8993
incomingmsn=*
mode=immediate
controller=1,2,3,4
softdtmf=1
;accountcode=
context=demo
2006 Jan 24
2
Re: Asterisk-Users Digest, Vol 18, Issue 134
O.K. thanks a lot, Felix and Peer Oliver. But somehow asterisk keeps
telling me while startup:
[chan_capi.so] => (Common ISDN API for Asterisk)
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused
contr1
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused
contr2
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused
contr3
Jan 24 14:30:47
2006 Jan 26
3
Chan_capi on builds 7955>8320 strangeness
Hello All,
I am having an odd problem with Armin's chan-capi_cm on builds higher
than 7955.
It would seem that this happens on anything higher than 7955.
What is happening is the isdn is ringing, then asterisk does a goto-if
and just hangs.
Asterisk itself is ok, but the isdn then rings out or busys out on the
other side.
Outgoing works fine, this only seems to effect incoming.
I
2004 Jun 23
1
capi.so problem on startup
Hi,
I'm new to asterisk and try to get it work with capi.so. When I try to
start asterisk with "asterisk -vvvvc" I get the following errors. I
couldn't find any hint on the net what may be wrong in my configs.
Has anybody got a hint?
Here is the error output:
[capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
Jun 23
2003 Jul 22
3
capi_chan error - CAPI not loaded.
Good day,
*newbie alert*
I try to run * with capi_chan (and later on SIP).
System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4
HW: AVM B1 ISA / Celeron 400 / 128MB RAM
Starting * the following ends up in the messages
Jul 22 19:47:03 WARNING[16384]: File chan_mgcp.c, Line 2925
(load_module): Unable to get our IP address, MGCP disabled
Jul 22 19:47:03 WARNING[16384]: File
2003 Apr 22
1
struggling with Diva 4BRI and chan_capi
Hi,
I am trying to configure a Diva Server 4BRI to work with chan_capi. Here
are the steps that I took:
- compiled fresh kernel with new-style CAPI support: i4l_divas_1.2
- got the divactrl_1.2 utilities, configured the card startup scripts,
- rebooted, card firmware loaded properly, "capiinfo" displays detailed
info on 4 controllers, however there is an error message:
FAC REQ -
2004 Dec 08
2
CAPI, BRI and grouping B channels
Dear All,
I have a working asterisk installation in the UK on
BRI point-to-point.
I am using Redhat8 with one Eicon Diva Server 2.0 card
with chan_capi-0.3.5 and Asterisk 1.0.1.
I have got to the stage where I can make and receive
calls over ISDN.
My question:
How do I group the 2 B channels so that when one
channel is in use, the other channel is availble to
receive[make] an
2004 May 24
1
Chan_capi 0.3.1 , Asterisk , 3 x C4 active ISDN card Segmentation fault
Hi,
i use chan_capi 0.3.1 with asterisk (stable branch cvs) and 3 x c4
active ISDN card.
From Controller 1 - 7 there are no problems making calls between
asterisk and the pstn.
But when i make calls from controller 8 - 12 i get on every controller
(8 - 12) a segmentation fault in asterisk :(
I tried different linux distributions (gentoo 2004.1, redhat 9.0 , suse
9.1) but same error.
2004 Jun 01
2
Syntax for 2 ISDN Cards
Hi there,
I searched in mailinglist and in web, but no answer to my problem...
Only this post with no answers:
http://lists.digium.com/pipermail/asterisk-users/2004-March/038994.html
I'm using CVS Asterisk (05/17/04) with chan_capi 0.3.1. (multiple
controller support). In my Asterisk-box there are 2 Fritzcards
(module for second card compiled with changes on sourcecode found in
the web).
2004 Aug 10
11
CAPI call transfer
Hi,
I am having trouble configuring CAPI so that call transfers work.
I make a SIP call to asterisk which goes out on ISDn via CAPI. Then
I
try to do a transfer from the SIP phone which doesn't work and
results
in the call being disconnected.
The error message given by asterisk is that it chan_capi can't find
an
entry for the outgoing msn for the transfer however the outgoing msn
is the
2007 Mar 22
1
Problem in using Two BRi Cards in Asterisk
Hi,
I have done my best and tired of searching the net about the problem. If anybody could help
would be a great favour.
Description of Problem
------------------------
I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim
is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture
manual. After installation dmesg
2004 Apr 28
4
Mysql Confusion..
Ok I know this may have been covered and I did have a look back in the
archives but didn't find anthing so I am asking it now..
Many moons ago the MySQL CDR functions and MySQL Voicemail functions had
to be removed from the main asterisk code because of licensing issues..
Now there is new MySQL stuff like MySQL FRIENDS for SIP and IAX
definitions..
So how is it that these options
2007 Mar 22
1
chan_capi and only one B channel usable?
Hello list!
I have a Asterisk 1.2.10 running using the package from Backports.org
for Debian Sarge.
I have setup chan_capi (0.6.5 from Backports) and it seems that I am
only able to use on B-Channel.
When trying to place the second call I get:
CAPI INFO 0x34a2: No circuit / channel available
capi info shows:
Contr1: 2 B channels total, 1 B channels free
And capi.conf is:
[ISDN1]