asterisk users - Jan 2006 - Re: Asterisk-Users Digest, Vol 18, Issue 134

O.K. thanks a lot,  Felix and Peer Oliver. But somehow asterisk keeps  
telling me while startup:

[chan_capi.so] => (Common ISDN API for Asterisk)
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused  
contr1
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused  
contr2
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused  
contr3
Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused  
contr4

Even though 3 lines (Anlageanschluss "Point-to-Point"; Euro-ISDN) are
connect and asterisk doesn't react even if verbose is 5 and capi  
debug enabled. Swisscom sends me 3 Digits as DID, for example for the  
direct call 01 389 92 31, it sends me 231.

At the End I would like to use asterisk and AVM 4 with 3 BRI lines  
and 1 ISDN-phone (Extens: 251). At the moment only the 3 BRI lines  
were connected. Do you know how to do that? Maybe like this:

/etc/asterisk/capi.conf
;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8

[ISDN2]
isdnmode=ptp
msn=51
incomingmsn=251
controller=4
softdtmf=1
accountcodecontext=Amt
callgroup=2
devices=2

[ISDN1]
isdnmode=ptp
msn=3899231
incomingmsn=*
controller=1,2,3
softdtmf=1
accountcodecontext=Intern-ISDN
callgroup=1
devices=6

/etc/capi.conf
#SuSEconfig.isdn generated
# card  file    proto   io      irq     mem     cardnr  options
c4      c4.bin  DSS1    -       -       -       1       p2p
c4      -       DSS1    -       -       -       2       p2p
c4      -       DSS1    -       -       -       3       p2p
c4      -       DSS1    -       -       -       4       p2p

Versions:
net-misc/asterisk-chan_capi-cm-0.5.4
net-misc/asterisk-1.0.8-r1  +alsa -bri +debug -doc -gtk -hardened  
+mmx -mysql -postgres -pri -resperl -speex -vmdbmysql -vmdbpostgres - 
zaptel

---
Claudio Beffa
Albertstrasse 15 - 5430 Wettingen - Switzerland
+41795699713 - claudio@beffa.ch - www.beffa.ch

Claudio Beffa schrieb:
> O.K. thanks a lot,  Felix and Peer Oliver. But somehow asterisk keeps  
> telling me while startup:
> [ISDN2]
> isdnmode=ptp
isdnmode=did

might work ...
> msn=51
msn= is not needed anymore. use SetCallerID in the dialplan instead.
> incomingmsn=251
> controller=4
> softdtmf=1
> accountcode> context=Amt
> callgroup=2
> devices=2
> 
> [ISDN1]
> isdnmode=ptp
same here.
> msn=3899231
> incomingmsn=*
> controller=1,2,3
> softdtmf=1
> accountcode> context=Intern-ISDN
> callgroup=1
> devices=6
> 
> /etc/capi.conf
> #SuSEconfig.isdn generated
> # card  file    proto   io      irq     mem     cardnr  options
> c4      c4.bin  DSS1    -       -       -       1       p2p
> c4      -       DSS1    -       -       -       2       p2p
> c4      -       DSS1    -       -       -       3       p2p
> c4      -       DSS1    -       -       -       4       p2p
> 
> Versions:
> net-misc/asterisk-chan_capi-cm-0.5.4
get a later version

-- 
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA

The contents of the capi.conf are wrong for the version of chan_capi you use
(see capi.conf example in chan_capi package)
Or update to newer chan_capi 0.6.*

Armin

On Tue, 24 Jan 2006, Claudio Beffa wrote:
> O.K. thanks a lot,  Felix and Peer Oliver. But somehow asterisk keeps
telling
> me while startup:
> 
> [chan_capi.so] => (Common ISDN API for Asterisk)
> Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr1
> Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr2
> Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr3
> Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr4
> 
> Even though 3 lines (Anlageanschluss "Point-to-Point"; Euro-ISDN)
are connect
> and asterisk doesn't react even if verbose is 5 and capi debug enabled.
> Swisscom sends me 3 Digits as DID, for example for the direct call 01 389
92
> 31, it sends me 231.
> 
> At the End I would like to use asterisk and AVM 4 with 3 BRI lines and 1
> ISDN-phone (Extens: 251). At the moment only the 3 BRI lines were
connected.
> Do you know how to do that? Maybe like this:
> 
> /etc/asterisk/capi.conf
> ; 
> ;  CAPI config
> ; 
> ; 
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=0.8
> txgain=0.8
> 
> [ISDN2]
> isdnmode=ptp
> msn=51
> incomingmsn=251
> controller=4
> softdtmf=1
> accountcode> context=Amt
> callgroup=2
> devices=2
> 
> [ISDN1]
> isdnmode=ptp
> msn=3899231
> incomingmsn=*
> controller=1,2,3
> softdtmf=1
> accountcode> context=Intern-ISDN
> callgroup=1
> devices=6
> 
> /etc/capi.conf
> # SuSEconfig.isdn generated
> # card  file    proto   io      irq     mem     cardnr  options
> c4      c4.bin  DSS1    -       -       -       1       p2p
> c4      -       DSS1    -       -       -       2       p2p
> c4      -       DSS1    -       -       -       3       p2p
> c4      -       DSS1    -       -       -       4       p2p
> 
> Versions:
> net-misc/asterisk-chan_capi-cm-0.5.4
> net-misc/asterisk-1.0.8-r1  +alsa -bri +debug -doc -gtk -hardened +mmx
-mysql
> -postgres -pri -resperl -speex -vmdbmysql -vmdbpostgres -zaptel
> 
> ---
> Claudio Beffa
> Albertstrasse 15 - 5430 Wettingen - Switzerland
> +41795699713 - claudio@beffa.ch - www.beffa.ch
> 
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>