similar to: bri-stuff-0.0.2 ported to actual development CVS (head)

Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the

> If you can't wait you can use the patch from someone who merged the > bristuff patch with a more recent version of cvs head... > > This one: > http://capi4linux.thepenguin.de/download/asterisk/bri-stuff-0. > 0.2a-pp.tar.gz Thanks for that pointer, I'll give it a try. Bye, martin

Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator. Again I added many

We're using the Quad-BRI card from Junghanns.NET with corresponding drivers (bristuff 0.0.2). The driver tries to patch asterisk libpri, which fails for current version. Anyone got an idea what'S the latest version of asterisk / libtri usable with the Quad-BRI Card? Thanks, Martin

Hi there, I just finished work on my current PBX dialplan configuration. I didn't find anything compareable yet so I think it might be interesting for someone else too. Short overview: - seperation of the numbers in blocks (just definded) - error/cause handling - advanced access control (even vor ISDN Zap clients) - access levels - denylist with national number blocks (for Germany) -

> The bristuff distribution comes with a install.sh script > (./install.sh) > which downloads, compiles the required software on your system. > > If you want to do it manually, look into download.sh to see the exact > cvs checkout options which downloads the required asterisk and libpri > versions. Yes, I know which libpri/asterisk versions bristuff downloads when using

Hello, I just noticed an error in the current version of Klaus-Peter Junghanns bristuff package, especially in the HFC module. Everytime I try to unload the HFC module with "modprobe -r" I got a kernel panic and the complete server hangs up so I need to do a hard reset. Regards, Julian Pawlowski

> I'd like to create the following: a user picks up the phone > (gets a dial tone), dials '0' for an 'outside' line, gets a > second (different?) dialtone, and is able to enter an > external phone number. Klaus-Peter Junghanns has something like this on his page: http://83.137.99.170/jn/relaunch/asterisk/page19.html It didn't work for me correctly so I

Hi ""noobs"" and others(like me). I've been struggling for hours,days,days,days.... to get my Asterisk work with 2x HFC-S BRI cards. One card for use in NT-mode for connecting my ISDN DECT phone,and one card as gateway to PSTN. Now it'works,and I just want to share some of the experience with others. I'd guess there must be 'Somebody Out There' having

On Friday, March 31, 2006 3:52 PM Chris Earle wrote: > I'm wondering if I should be using zapHFC with my Junghanns card > instead of qozap? Why would you want to do that? Sorry if I missed the start of the problem but qozap is what you want to use with your Junghanns card (at least if you want to stay with zaptel/libpri). > Everyone always mentions zaphfc -- mostly I >

Hi there I am in the UK.. and am running latest asterisk on FC1 (2.4 kernel). I would like to know what the best option is for a 4 port BRI card. I notice Digium don't provide one.. I have heard the Junghanns do one...but are there others ?? Is the Junghanns card reliable/stable with good sound quality ?? I notice it is very expensive in a per port comparison with the Digium cards.... hence

> Appreciate the replies everyone -- really > > I'm wondering if I should be using zapHFC with my Junghanns card instead > of > qozap? Everyone always mentions zaphfc -- mostly I guessed because they > are > using a zaphfc-compatible card ----- but *maybe* I should try that instead > of qozap??? > > And yep -- totally know about the module load order thing and

Hi, I have a couple of questions about Quad-BRI solutions for Asterisk, and was hoping that I might get some feedback based on other people's experience. We currently use the Junghanns card, which is a pure Zaptel solution, which is fantastic, but they have no hardware EC solution, and their drivers are becoming increasingly un-stable with time (I back-port to a modified qozap driver from

Hi All I have a Junghanns BRI 4 port installed where only the first channel of each line is working i.e. channels 1 and 4 work but 2 and 5 don't. Our config is the same on this box as 15 other similar installations where all works well. the only error I see is in /var/log/messages: Jun 28 15:49:31 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:51:27

All, I have been trying to get CAPI4Linux working on my machine and being frank am failing miserably! I am looking for any help available, I am real newbie (so please be gentle) and choose to run Mandrake 9.2 as it appears quite friendly (or so I thought!). I have been following the guidance found at http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the AVM card (actually I

Hi, I'm looking for an interface card for termination of Euro-ISDN2 (BRI) lines. That is ISDN lines from the telco into my Asterisk box. Any recommendations, good/bad expiriences ? At present I'm looking at cards from BeroNet and Junghanns. Cheers, John Faroese Telecom

Hi All, First of all, please no flames about the footer of this message. It's being inserted into all outgoing email by the server here without asking me personally first once I send out email. Since I've been very interested in setting up an Asterisk PBX + IVR + Voicemail system to support a small business and a foundation for quite some time now, in order to replace their current ISDN

Hi, I'm currently deciding on what card to pruchase for octo/quad BRI card to use with Asterisk on EuroISDN lines. I'm aware of at least two options (Junghanns or Beronet), but don't know how stable and well supported they are. Which ones are better supported ? Any experiences? Any advice ? How tos ? What would you buy ? Thanks in advance, Regards, Rob.

Hi, I plan to setup an * Server with a TE10P PRI card as E1 and a BN4S0 4 Port BRI card in one box. I tried it first with the bristuff drivers from Junghanns. The BRI card worked fine alone, but as soon as I load the zaptel driver for the TE110P the BRI card says, that the port is down. So I tried it with mISDN. But it seems that this stuff is still unstable (Asterisk refuses to start at first

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe