similar to: X100P Ireland Red Alarm

Hi, I suspected that I the analogue phone should have got a pass through signal when the power was off to the server, unfortunately it doesn't. I kept asking digium support about that but they didn't give me an answer. The problem is how do I identify whether the X100P is incompatibel with the network or faulty without possibly wasting another USD100??? Aaron On Sat, 2004-05-15, Eric

Ahhh this could be my problem! I just checked which wires on the RJ11 cable had a voltage across them and it was the yellow and green (3 & 4?). From what someone posted the other day it's supposed to be Bumble Bee and Christmas Tree. I did have to get a technician out to fix my line when it was first installed because it was dead. Maybe he wired it up incorrectly or maybe they just do it

Hi, I've just added an X101P FXO card to my asterisk machine. The card is detected ok but zttool always shows it in a RED alarm state, which I understand means that it doesn't detect the line. I've connected the card via the line socket to my analogue line using the cable that came with the card (and have also tried other cables too) but I always get a RED alarm. I'm located in

I think I have it configured properly. ztcfg -vv shows it as channel 1 and zttool shows it as OK. But I can't dial out. When I try, it shows it arrive in teh right stack, but then issues the following errors: channel.c:1676 ast_request: No channel type registered for '{PSTN-1}' app_dial.c:554 dial_exec: Unable to create channel of type '{PSTN-1}' = = Everyone is busy at

Hi, Has anyone connected * to a Colt E1 line in Europe? If so could you send me the zaptel.conf and zapata.conf. Thanks, Aaron __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

Hi, I have been having a look at the code for asteriskprepaid and it appears as if the billing time starts when the Dial command is called. Is this correct? Does the caller get billed for the dialling time and the call time or just the call time? Although going off some comercial calling cards I have used I think they start billing when you begin thinking about the call. Thanks, Aaron

Hi. I have installed a x100p (THE x100p for those who have seen my former post). Now I just want to connect a "normal" phone (not an IP phone) to the card and use it as a sip extension (I have a FWD account)... more clearly: I want to be able to pick up the phone and call any FWD user using my FWD account... receive the FWD calls in that phone, and also to be able to make normal

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/22b214e9/attachment.htm -------------- next part -------------- hi all, can anyone give solution for this. ?wct1xxp - Digium Wildcard T100P T1/PRI Card 0 zttool gives RED Digium Wildcard T100P T1/PRI Card 0 my zaptel.conf look like this span=1,1,0,esf,b8zs

When I dial a SIP phone which is specified in the sip.conf, but the phone is not connected, Asterisk gives the message "The user at Extension XXX is on the phone ...." Shouldn't the message be the unavailable message? Is there something wrong with my set up or is this a "bug" with Asterisk? Simon Brown

I was told the X100P will have issues if installed on a line with a DSL connection. Is there a card that will work correctly on a DSL connection? Thanks!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/6de6226b/attachment.htm

I'm having sporadic problems with my X100P card. When trying trying to call out I get a message on the console that the channel is busy even though I have bounced asterisk. It seems the card grabs the line and doesn't let go. When I try to call the number I get a busy signal. If I perform a rmmod wcfxo and restart asterisk everything retruns to normal. I have a TDP400P installed along with

Hi, I have been trying to get a Wildcard TE122 card running here the last couple of days. libpri and zaptel are all installed and configured to E1 specs. The jumper on the card is on, so configured for E1 (I'm in Norway). When running zttool, I get 'Alarms: RED' on the single card installed. Other information in zttool: Current alarms: Red Alarm Sync source: Internally clocked

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040810/16371a21/attachment.htm -------------- next part -------------- ? Hi, I'm using TE410P card with four T1 lines. I've configured all the channels in my /etc/zaptel.conf file. In zttool i'm getting "OK" for the "Span-1" but the other three spans giving

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/52b2ac04/attachment.htm -------------- next part -------------- hi all, can anyone give solution for this. ?wct1xxp - Digium Wildcard T100P T1/PRI Card 0 zttool gives RED Digium Wildcard T100P T1/PRI Card 0 my zaptel.conf look like this span=1,1,0,esf,b8zs

Hi Last week I installed Asterisk (release1) with digium t100p single span T1 (wct1xxp) board on Dell GX270 pc configured for PRI. Asterisk/t100p is currently the only user of the t1 line. All worked well for about a half a day, PSTN to SIP phones to non-SIP IP phones etc. Alas, since then I consistently get multitudes of blue alarms on all b-channels followed by a loss of d-channel: Aug 31

Calling out on PSTN over a TDM400P seems to generate a Red Alarm - whatever that is. I have another extension on the PSTN, and I can dial out over that. zttool shows no alarms. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM400P REV I Board 1 OK 0 0 0 CAS Unk YEL 0 db

(to mods: sorry for any extra work I've put you through. Posting from my work account, as proper) Hello all, I'm back. I've got that lucky feeling that this will all work out very soon, and I hope that that is true. The issue: In my * server I have a t100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm

Greetings, This is probably some configuration issue, but for some reason my system has stopped playing a ringing sound when an extension is dialed. The phone rings but there is no ring sound in the ear piece. Gene Kochanowsky

Does anyone know of a device that will take an SS7 link and convert it to a PRI? -- respectfully, Joseph - (606) 477-2355 x140 ------=============