similar to: CAPI & Eicon Crash Asterisk

Ok I know this may have been covered and I did have a look back in the archives but didn't find anthing so I am asking it now.. Many moons ago the MySQL CDR functions and MySQL Voicemail functions had to be removed from the main asterisk code because of licensing issues.. Now there is new MySQL stuff like MySQL FRIENDS for SIP and IAX definitions.. So how is it that these options

Hello, I need to detect both fax and answer machine, and it should be valuable that the detection will be run by the Diva card itself. So : - I read Diva Documentation, and I found that the Diva could send some specific DTMF, if I had "[..] enabled [this functionnality] by the application for a designated controller through a manufacturer request command 9 [...]", but I didn't

Hello, I'm in the process of building an Asterisk machine and need 5 or 6 BRI-Channels. I was looking for the beroNet and Junghans cards and stumbled upon the Xorcom Astribank xBRI products. Has anybody tried out the Astribank xBRI-Channel Banks? Are they production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET octoBRI ISDN? Thanks in advance, Lars -- We don't like their

hi using chan_capi, I get _lots_ of hanging channels after a while. This was first beleived to be SIP related, but I doubt it. below, 'roy' is on MGCP, and 'fax' is just a bridged dial if someone dials in, it's re-routed to another external number roy asterisk1*CLI> show channels Channel (Context Extension Pri ) State Appl. Data

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP

Hello list, i am using: asterisk CVS-10/13/03-11:54:33 chan_capi-0.3.0 ATA-186 V2.16.1.ms over MGCP Situation: ISDN calls ATA ISDN speaks with ATA ATA-Phone presses Flash and speaks to another one (SIP/snom200) ATA-Phone hangs up ISDN talks to SIP/snom200 snom200 hangs up The incoming extension of ATA keeps busy for a time (20 sec?), even its not off-hook anymore! Any ideas? -- Swapping

hi all I'm trying to use the manager interface to do some nagios (http://nagios.org/) integration, and I find some parts of it not really optimal. What I'd like to change, is to make \r\n\r\n an actual terminator, something it isn't today, AFACS. Below is the Status output - it shows Response, Message, \r\n, Status post, \r\n, Status post etc etc. Without a parsable terminator, I

hi when two calls are active on controller 2, chan_capi won't use controller 1. this is with AVM C2 roy -- Executing Goto("SIP/torgeir-b476", "capiring|BYEXTENSION|1") in new stack -- Goto (capiring,90044875,1) -- Executing Dial("SIP/torgeir-b476", "CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack == data = 22545066:b90044875 ==

Hi; I've been asked to take a (remote) look at an Asterisk@home system running asterisk 1.0.9 on Centos 3.5. It's running chan_capi-0.3.5 It has an AVM c2 ISDN card which is plugged into what I believe to be a couple of BT ISDN2e "System Access" (i.e. point to point) connections. We've placed a support call to BT to find out how these lines are actually provisioned, but

Hallo all, I am trying to get * with chan_capi and a ptp-ISDN with 4 lines on a AVM C4 card to work. But weather inbound nor outbound is working :( My capi.conf: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=8993 incomingmsn=* mode=immediate controller=1,2,3,4 softdtmf=1 ;accountcode= context=demo

O.K. thanks a lot, Felix and Peer Oliver. But somehow asterisk keeps telling me while startup: [chan_capi.so] => (Common ISDN API for Asterisk) Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr1 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr2 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr3 Jan 24 14:30:47

Hi, i use chan_capi 0.3.1 with asterisk (stable branch cvs) and 3 x c4 active ISDN card. From Controller 1 - 7 there are no problems making calls between asterisk and the pstn. But when i make calls from controller 8 - 12 i get on every controller (8 - 12) a segmentation fault in asterisk :( I tried different linux distributions (gentoo 2004.1, redhat 9.0 , suse 9.1) but same error.

Hi there, I searched in mailinglist and in web, but no answer to my problem... Only this post with no answers: http://lists.digium.com/pipermail/asterisk-users/2004-March/038994.html I'm using CVS Asterisk (05/17/04) with chan_capi 0.3.1. (multiple controller support). In my Asterisk-box there are 2 Fritzcards (module for second card compiled with changes on sourcecode found in the web).

Hi, I'm heaving trouble using two Fritz ISDN cards in one machine. I followed "http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO" and i think everything works great. cat /proc/capi/controller shows: 1 fcpci running fritz-pci A1 3.11-02 0xb400 5 2 f2pci running fritz2-pci A1 3.11-02 0xa400 10 The asterisk CLI shows: *CLI> capi info Contr1: 2 B channels

I have an asterisk installation connected to 2 isdn lines via an AVM C2 card. modules seems to load well, lsmod gives : c4 19588 4 b1 24192 1 c4 capidrv 28468 2 isdn 134604 9 capidrv slhc 7552 1 isdn capi 18112 4 capifs 6024 2 capi kernelcapi 46112 4

Hello, Actualy I have got a PBX conected to a BRI port on a Cisco Router witch route the calls. The router is using h323 with the other end. How could I replace the actual PBX and pass all the calls to the router, as now works. I tryed connecting an asterisk CAPI port against the same BRI Cisco port, but I can not make any calls, I get the following error from asterisk. Connected to

Hi, As far as I am aware, the model.matrix function does not return perfect metadata on what each column of the model matrix "means". The columns are named (e.g. age:genderM), but encoding the metadata as strings can result in ambiguity. For example, the dummy variables created when the factors var0 = 0 and var = 00 both are named var00. Additionally, if a level of a factor variable

I just downloaded chan_capi.0.3.4a.tar.gz but it will not compile on my system (Suse 9.1). I compiled and installed Asterisk and it is running, did I miss a configuration or dependency for Chan_Capi somewhere ? cheers, Mike linux:/usr/src/chan_capi-0.3.4a # make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

Hi there, the subject says it all... I get the following error messages: ---- mmielke@pbx:~/chan_capi-0.3.5> make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO -c -o chan_capi.o chan_capi.c