hi
when two calls are active on controller 2, chan_capi won't use controller 1.
this is with AVM C2
roy
-- Executing Goto("SIP/torgeir-b476",
"capiring|BYEXTENSION|1") in new
stack
-- Goto (capiring,90044875,1)
-- Executing Dial("SIP/torgeir-b476",
"CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack
== data = 22545066:b90044875
== capi request omsn = 22545066
== found capi with omsn = 22545066
== idest = 22545066:b90044875 timeout = 0
== doB3 = 0x1 dest = 90044875
== creating pipe for PLCI=-1
== sent CONNECT_REQ MN =0xc53d
== received CONNECT_CONF PLCI = 0x302 INFO = 0
-- Called 22545066:b90044875
== DISCONNECT_IND PLCI=0x302 REASON=0x34a2
STATE = 0x5
-- CAPI[contr2/] is busy
== Everyone is busy at this time
NOTICE[7061521]: File chan_capi.c, Line 414 (capi_hangup): hangingup
-- removed pipe for PLCI = 0x302
-- Executing Dial("SIP/torgeir-b476",
"CAPI/22545060:bBYEXTENSION|120|Ttr") in new stack
== data = 22545060:b90044875
== capi request omsn = 22545060
NOTICE[7061521]: File chan_capi.c, Line 884 (capi_request): didn't find capi
device with outgoing msn = 22545060. you should check your config!
NOTICE[7061521]: File app_dial.c, Line 476 (dial_exec): Unable to create
channel of type 'CAPI'
== Everyone is busy at this time
WARNING[7061521]: File pbx.c, Line 1702 (ast_pbx_run): Timeout, but no rule
't' in context 'capiring'
-- Executing Goto("SIP/torgeir-7984",
"capiring|BYEXTENSION|1") in new
stack
-- Goto (capiring,90044875,1)
-- Executing Dial("SIP/torgeir-7984",
"CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack
== data = 22545066:b90044875
== capi request omsn = 22545066
== found capi with omsn = 22545066
== idest = 22545066:b90044875 timeout = 0
== doB3 = 0x1 dest = 90044875
== creating pipe for PLCI=-1
== sent CONNECT_REQ MN =0xc89c
-- Called 22545066:b90044875
== received CONNECT_CONF PLCI = 0x302 INFO = 0
== DISCONNECT_IND PLCI=0x302 REASON=0x34a2
-- CAPI[contr2/] is busy
== Everyone is busy at this time
NOTICE[7077905]: File chan_capi.c, Line 414 (capi_hangup): hangingup
-- removed pipe for PLCI = 0x302
-- Executing Dial("SIP/torgeir-7984",
"CAPI/22545060:bBYEXTENSION|120|Ttr") in new stack
== data = 22545060:b90044875
== capi request omsn = 22545060
NOTICE[7077905]: File chan_capi.c, Line 884 (capi_request): didn't find capi
device with outgoing msn = 22545060. you should check your config!
NOTICE[7077905]: File app_dial.c, Line 476 (dial_exec): Unable to create
channel of type 'CAPI'
== Everyone is busy at this time
STATE = 0x5
"capidrit" 51L, 2488C
1,5 Top
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
Computers are like air conditioners.
They stop working when you open Windows.
