similar to: Time/Date missing on Cisco 7940G and 7960G SIP phone display

List, This e-mail simply links all the various topics as one...I started this thread. Q1- Samba being the PDC thingy Q2- "time server" option in smb.conf file Q3- 'net time' command on Windows clients. A1- Samba doesn't have to be PDC A2- Samba doesn't need "time server = yes" in smb.conf A3- Windows clients were not designed to keep proper time so it's a

Anyone have screen size + resolution for the cisco 7940g, 7960g? I'm having a hard time finding it anywhere. No vendors have the information and cisco doesn't list it. All I've been able to find is the rez of the 7940g : 100x145. -Dan

Is anyone using the subject phone without the proprietary call setup equipment? How do you configure this phone to use the * pbx? I am hoping to go out and buy a couple of phones but the dealer here says I need to spend another $15K or so for the call manager equipment. Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 sean.langley@gdcanada.com

Our new * server with Cisco SIP phones is now working pretty well. But we still have one problem that has not been resolved. The Cisco SIP phones have a consistent echo. It sounds like about a 500ms delay. This echo is not heard from the POTS side. It is heard when calling another SIP extension in our office. We are running 6.3 firmware on the phones. Any suggestions would be

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

Hello, I've recently received a Cisco 7960G phone with the factory default SCCP firmware on it. As we're using SIP on our network, the first things i've done was to upgrade but unfortunately the phone just restarted. By looking on the TFTP logs and tcpump output, i've seen that the phone crashed and restarted just after downloading the OS79XX.TXT file, without requesting the image

We have the following available for sale. All equipment tested with a 90-day warranty. (150) CP-7960G refurbished $270/ea (20) CP-7960G new $305/ea (20) CP-7940G new $260/ea (50) CP-7905G new $140/ea (200) CP-PWR-CUBE new $25/ea (50) ATA186-I1 refurbished $130/ea (arriving next Monday) Let me know if we

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Are any versions of the Cisco 7940/7960 or 7940G/7960G phones compatible with the 802.4af Power over Ethernet Standard? Ok, I know the question has been asked before, but googling has turned up several contradictory results: 1/ No - not at all 2/ Maybe - 79XXG will work 3/ With a special cable/dongle (a la wikki) I am looking at getting

Hi, Has anybody been successful in running the 7914 expansion unit for the Cisco 7960G IP phone? For anybody unaware of what the expansion unit does, it provides 14 additional buttons, with an LCD display. The idea, is that with an expansion unit (a 7960 can take upto 2 of these units), a user can either assign more speed-dial's, or can monitor line status/account status. So, you can

Folks, I have CISCO 7940g phone. I have in the past configured the phone with two lines. Having found the 2nd line wasn't much use, I want to remove it from the config. I have taken it out of the SIP config file that is TFTPd to the phone but it is still showing on the phone and it is still trying to log into Asterisk with that account. I have tried removing the config line and blanking

> -----Original Message----- > From: Travis Johnson [mailto:tlj@ida.net] > Sent: Monday, September 08, 2003 1:05 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Cisco 7940/7960 ethernet ports > [...] > We are having a problem with Cisco 7940 and 7960 phones when > the PC is plugged into the 2nd ethernet port on the phone. It > will drop the

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to

Hi, We've got a customer site with Cisco 7940G Phones connecting to our Asterisk Server via SIP. However, upon running a "sip show peers" it states that the phone is : user/user (Unspecified) D 255.255.255.255 0 Unmonitored All phones can call out via our Asterisk Server fine regardless. The problem is when they try and place a call to one another, where it

Is anyone using a 3com 3CNJPSE to power a 7960G? I have a couple of 7960Gs and 3CNJPSEs but no combination appears to work. Both phones work fine with a cisco power cube. I get a 47.6V reading across pins 5 and 8 on the patch cable coming from the 3CNJPSE. The network still works through the 3CNJPSE, just no power to the phone until I connect the power cube. Using two straight through wired

Is there more than one version of the Cisco 7960? I see some items advertised as 7960 or 7960G, but searching on 7960 only brings up 7960G info, or ambiguous stuff. joe a.

I was wondering if people have experienced issues with Cisco 7960G and Asterisk. Any feedback on people's experience deploying this phone in production environments would be appreciated. Thanks in advance

I'm trying to set-up Asterisk server and I would like to buy 2 SIP phones. Has anybody tried Cisco 7960G? Or 7940? What audio compressions can I use with this phone and Asterisk? Reason why I'm asking is because Cisco supports G.711 and G.729a audio compression (probobaly some tohers but they are not listed on data sheet) and on Asterisk features i found that it supports G.729 but need

I could use some skinny/Cisco help here. Was finally able to get the phone registered to * but whenever someone tries to call that phone it freezes and reboots itself. Same thing happens when you pick the handset up off the 7960G; it locks and reboots about 5 sec later. Here is what * shows when I plug the phone in: -- Starting Skinny session from 64.72.107.1 Device SEP000F3442E4A7 is

I am running Asterisk 1.4.5 on a debian Linux server. Saturday night/Sunday Morning Daylight Savings time occurred. The server shows Mon Mar 10 10:59:42 PDT 2008 when I do a date command, but the Cisco 7940 and 7960 show 09:59 10/03/08. How do I update the time display on the telephones please? No virus found in this outgoing message. Checked by AVG. Version: 7.5.518 / Virus Database:

hi! I've got cisco 7960G working with * box. Calls could be Blind Xfered through the phone but not the supervised transfer( Message on the phone: Transfer failed). Even when I put the caller on hold and resume it later, I can't hear the other side but the otherside can hear me. (It shows as the line is connected though. Yet the respective caller entry blinks.) Any suggestions most