similar to: ZAP channels

Can someone help me what went wrong with this call? This call was initiated from dev/ttyI0 device on my asterisk server to mediatrix unit. Mediatrix unit user received the call and call started. I can hear them OK but they can not hear me correctly (cut-off sound, noise). Call was finally hunged up. Can anyone point out if there was something wrong? -*CLI> sip debug SIP Debugging Enabled

I am interested to learn if I need to have ztdummy installed if I do not have any zaptel hardware in my machine? I have found a lot of references with RTP problems which were related to RTP timing (or lack of it). My problem is that voice coming from SIP hardware is OK, but voice going from asterisk to SIP hardware is choppy, full of noise or completely cut-off. Am I going to solve my problem

Few weeks back local telco introduced option of custom ring tones. I am not talking about your phone ring tones but about ring tones you hear in your headset while phone is ringing on the other end. If I understand correctly, ringing tone is generated localy on asterisk if you are connected to phone network with E1/T1 connection. Which means that instead of regular beep-beep tone we could send

I have asterisk with following users; a) zaphfc ISDN card with two channels b) two mediatrix FXS gateways with four channels each c) 1x CISCO 7905G d) two notebooks with MS Messenger 4.7 Now, it seems that any combination works correctly in all combinations except when I call from MS messenger and then call is dropped always in 25th second of the call. Any ideas what I did wrong? here is my

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

> -----Original Message----- > From: Jacqueline Lee [mailto:jlee@isdomaininc.com] > Sent: Friday, September 23, 2005 11:46 AM > To: asterisk-users@lists.digium.com > Subject: channel offhook state > > > We are using a digium card (TDM400) with asterisk for our access to the > PSTN. Initially when the server starts, all the zap channels on the card > are in the

Hi, I would like * to treat a SIP extension as a normal extension, when it comes to the busy functionality. In other words, if someone tries to call the SIP phone and there is already an ongoing conversation, the new caller should get a busy message/tone Is there any parameter that I can set? Is this something that should be configured at my softphone? Best, PHM

I have an interesting problem. I am attempting to install a payphone utilizing a Cisco ATA-188. The payphone actually works, but there are some timing issues. What happens is you pick up the payphone and the ATA grabs a line and goes offhook. While you monkey with putting money in and dialing the number, you are eating up the time before you get the offhook reorder tones (or howler tones

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a

Does anybody know if there are any external telephone-keypads for sale anywhere? (containing the keys 0-9, *, # and onhook/offhook would do) I am looking for a keypad to control a softphone and would prefer the controls to be in the physical world instead of as a window. Sincerely, Markus Hakansson

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

I am searching for a way to add a 2 second delay before calling out with Dial(). Sometimes I get the message "you must first dial a 1 to place this call". I presume the phone company is missing the first digit pulsed out sometimes. How do I put a 2 second delay after coming offhook and before dialing the digits? Thanks, jerry

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

I have a TDM400p with 3 FXS mods and 1 FXO mod. I have all set up with what seems to be correct settings (according to digium and asterisk wiki). As soon as I plug in my POTS line into FXO mod the line goes into offhook state (whether I have power to the card or not). Should this happen? When I try to call * box all I get is busy signal. I've installed stable version, cvs version, change

Anyone else got a Sipura 3000 in the UK? Apart from CID not working it also seems to not notice any of the line state changes on the PSTN when the remote party terminates the call. It only recognises the offhook signal which gets sent much later. Chris

I finally got my X100P working and now I have a question. I have several Skutch phone line simulators. My X100P works as expected with both a POTS line and an analog PBX port, but when I use a phone line simulator it doesn't answer the line. The phone line simulator doesn't power the line until the phone set goes offhook. Asterisk shows the RED alarm and then the alarm clearing but never

Hi, I've dug a bit through the wiki and the mailing lists, and haven't really seen anything like this, but there must be someone out there doing this. Basically, there is a fax line that I don't want to answer inbound, but I want it available to do dial out from. Right now, we are using a busy wait around the ringing line, but I was hoping for something that might be a little more

I have fixed this before, but I cannot for the life of me remember how I did it. I have a TDM400P with one fxo module and one fxs module. I setup Asterisk @Home and everything works fine, except when I try and call out. If I call out with a SIP phone it calls the zap extension and not the pstn line? If I take the zap extension offhook and call with the SIP phone it dials out the pstn line

I tried implementing my * and it didn't pass the spouse factor at this time. I wanted to hook it up for outbound only at this point to get a better handle on the dial plans and the echo problem. I thought this might have been done before as a natural part of testing - but maybe not. In wcfxo.c I found this: if (!wc->offhook && !wc->ringdebounce) { if

I've been having trouble with making outbound calls to my TELCO from a TDM400 card (FXS KS signalling) after upgrading from 1.6-beta9 to 1.6.0. The problem is completely intermittent. When it fails, I get this message: [Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) At some point, it starts working, but I don't know what