Displaying 20 results from an estimated 10000 matches similar to: "Modems"
2009 Mar 31
6
[Zaptel] Why no driver for PCI voice modems?
Hello
Considering how cheap PCI modems are compared to even the cheapest
PCI hardware from Digium, OpenVox, Sangoma, etc.... I was wondering
why Zaptel can't be used with those to connect an Asterisk server to
a POTS line for low-level use? It just seems overkill for SOHO users
who only get a few calls a day.
Is it because those modems are usually Windows-specific, and it would
be too
2004 Jun 27
1
Source for MD3200 modem cards?
It seems that the Apollo MD3200 winmodem sold my newegg no longer
uses the MD3200 chipset. At least the $13 version I ordered arrived
with a different chipset. I made them aware of the issue and hopefully
they will be changing their description soon.
Anyway, I'm looking for a new source now, anyone know where to get
these cards cheap? I know there is ebay, but I'm thus far getting
sellers
2004 Aug 07
4
Generic X100P setup issues
I am starting to dip my toes into the asterisk world, and to that end
I've scavenged an old PC (this is a home project, and I have basically
$0 to spend on it), and installed FC1. I've purchased a clone X100P (or
at least I was told it was), and I am trying to get it to work. However,
when I try and load the wcfxo module, I get the following errors...
[root@loudhoward root]# insmod
2005 Feb 01
3
X100P Clone
I'm new to asterisk and fror a cupple of days I heave been googleing the
net for digium "clones", because it's very hard for me to get a digium
card (X100P).
Does anyone Know another substitute for X100P (I know that intel based
modem with chip 537/MD3200 is working but I did not find any of those) ?
I made it work with an Intel 536 (with a costumised driver that I found
on
2005 Mar 26
3
Asterisk with Winmodem
I've read that it is possible to setup * using a winmodem (linmodem). I was wondering if anyone on the list has setup * with a winmodem and if so how they did it. I have a pctel modem (pct789) I'd like to play with.
Thanks for your help
Jared
2004 Nov 24
1
Which modem is known to work with asterisk?
Hi!
I want to connect my asterisk system to the PSTN. Now I'm thinking about
using an analog modem as FXO device.
Which modems do run? How is the voice quality? (I looked into the wiki,
but on
<http://www.voip-info.org/tiki-index.php?page=Asterisk%20hardware> no
regular modems were mentioned.
Or should I use a special FXO-card? I don't want to spend 99$ for such a
thing but
2005 Aug 09
2
X100P Wildcard - Hassle free clone?
Now that the X100P is no longer being offered by Digium, what is the
best solution? I seem to have run into a few posts where people talk
about problems they've had with their X100P clone cards (dropping
calls, echos, etc) other people seem to not have any problems.
Of the three chipsets that will work: Intel 537EP, Ambient MD3200, and
Motorola 62802 (as seen here
2004 Apr 26
8
Intel 537ep
Owias,
The 537 is, for the most part, a drop-in replacement for the Digium card. Please search the archive and the Wiki, as there have recently been several discussions about this exact subject.
To my knowledge that is about the only modem that works, but keep in mind it is _not_ supported. That being said, follow the instructions on Digium's site for installing the X100P and you should be
2005 Aug 12
2
v92 modems
Hello,
Is it possible to use v92 ( a few chipsets version )
modem as FXO PCI modules ?
While googling I found some postings on the subject.
Thanks
Varun
2005 Jan 10
4
Generic modem question
Does asterisk support the intel 537/md3200 chipset? I don't want to start
any flames here, I know all about using generic crap in asterisk,[*] which
I really don't approve of other than for testing, but I have a customer
demanding a generic chipset for his one backup analog line. He will not
spend the money for a Digium card and says he will find another
company if I can not provide a
2005 Aug 12
6
FXO port trhoug optimum voice VOIP service
Hello,
I have asterisk running on Fedora Core 3 with a x100p
(oem). After some time I got asterisk with some soft
extensions working (u gotta love open source), but I'm
stuck with outbound dialing. This is the diagnose:
- detect 1 wcfxo channel.
- when trying to make an outside call I get unable to
create channel of type Zap. Everyone is busy/congested
at this time
- When I plug the x100p
2009 Jul 23
3
PCI modems
Hi all,
I'm currently searching for a PCI modem that will be used to receive faxes. I've tried out a few modems but they all use conexant chipsets, which need out-of-tree kernel drivers and currently doesn't work here (kernel oops when the installation script modprobes the driver).
Does anyone know of a PCI modem that works out of the box with in-tree kernel drivers?
Thanks,
2004 Apr 18
4
Intel 536ep as a FXO?
Hi,
I've seen some reports about ruuning Intel modem with 537 or MD3200
chipset running with Zaptel drivers as a FXO port. Did anybody managed
to set up a PCI faxmodem based on Intel536ep chipset to work with * and
Zaptel drivers?
Modem seemd to work just fine with Linux, but the driver says no;)
some more info:
Linux 2.4.26
mazuchna:~# cat /proc/pci | grep 536
Communication
2004 Jan 26
7
GSM modems
Hi all,
I am interested in interfacing a GSM modem to *. I've seen a few
comments about doing this, but I'm not clear whether people have
actually made it work. I've used GSM modems for various data jobs,
mostly high volume SMS (no, not nasty marketing stuff - high volume
solicited SMS :-) ) . These only have analogue ports for voice. Does
anyone know of units with digital voice
2005 Jan 08
3
Echo on Zaptel FXO :(
Hi All,
I've got an MD3200 modem which is working as a Zaptel FXO interface for
Asterisk (X100P clone I believe). It seems to work, but on incoming or
outgoing calls I can hear the other party ok but when I speak, I hear
my voice echo back at me (quite quietly but it's distracting!) on
everything I say. The other party doesn't seem to hear the echo - they
just say I sound a bit quiet.
2004 Sep 06
2
Four single-port FXO Cards in one * box
Hi,
I have found some cheap single port FXO Cards on ebay. They are
apparently X100P compatible like the cards sold by Digium
My question is 1) Are they any good 2) will 4 such cards work in a
single * box without too much trouble?
Thanks
Andy
2004 Jul 21
1
Digium card x100p
hi, i've a question. is it possible to buy digium x100p card from italy
in some store (also online) without ordering it from USA?
on more, did anyone buy a modem with intel chipset 537 or md3200 and where
(in italy)?
Thanks
__________________________________________________________________
Tiscali ADSL Senza Canone, paga solo quello che consumi!
Non perdere la promozione valida fino al 27
2004 Jan 21
11
Digium X100P for $43
Digium X100P / new cards are is available on ebay for $43.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309
>
Hope this helps to who want to play with X100P! Are these being sold by
Digium ? I don't know ??
- SamW
-------------- next part --------------
An HTML
2005 Jul 18
2
Vizufon Video Phone
So I won one of these on ebay, in the auction it says it has the RJ45
ports on it but it doesn't :(
If I were to get an analog adapter would I be able to use the video
portion of this or am I SOL? The auction requires me to pay for
shipping back, so I end up losing money unless I sell it on my own.
Or has anyone hacked these to work on enet?
2003 Sep 15
8
Analog FXO Card
If anyone is looking, I just ran accross an ebay auction for X100P Cards at what I thought was a very reasonable price.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3046843672&category=48483&rd=1
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
-------------- next part --------------
An HTML attachment was