similar to: Grandstream Firmware ?

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

I inadvertently unplugged my Budgetone phone tonight and I think it went out and upgraded its firmware. It is now at 1.0.3.81. Does anyone know how new this might be? Suddenly things that have been working wonderfully before don't work--basically it seems to do the SIP stuff just fine but then all the RTP stuff breaks, even something as simple as retrieving my voicemail from a server on

Just noticed that version 1.0.3.81 has been released on the Grandstream website. Have fun... John ------------------------------------------------------------------------- NetRom Internet Services 973-208-1339 voice john@netrom.com 973-208-0942 fax http://www.netrom.com -------------------------------------------------------------------------

Hello, I am trying latest stable Firmware for GS IP Phone BudgeTone 101 found at http://gs-firmware.gratissip.dk/firmwares/ and the phone doesn't send a register staement (nothing in thertereal log). With the 1.0.3.81 version, the phone register properly. Is ther any know bug with the SW Version? Best regards, Daniel ANDRE -- Daniel ANDRE (mailto:daniel.andre@iris-tech.fr) IRIS

Hello, I have a problem with asterisk and Grandstream BudgeTone-100. With default configuration everything works (in anonymous mode and fixed IP), but if Im trying to enable registering, it dos not work. I used 'sip debug' and verbose level 10, nothing happens if I switch telephone on (no messages about bad auth etc). As I understood, after switching phone on at first it will try to

Looks like Mozilla forgives that problem you are talking about too.. I have had no problems configuring the GS phones using Mozilla on RH9.. > -=> On Sun, 24 Aug 2003 09:47:06 -0400 (EDT), John Vozza <john@netrom.com> said: > > > Just noticed that version 1.0.3.81 has been released on the > > Grandstream website. > > Doh. I see they still haven't decided

Hello, Anyone using the 1.0.4.55 firmware release with any success? I have had my Budgetone running 1.0.4.50 for about a month and a half now with no problems whatsoever, and I am a little leary about upgrading. -- Vice President of N2Net, a New Age Consulting Service, Inc. Company http://www.n2net.net Where everything clicks into place!

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

I'm using Asterisk on a open server (no firewall or NAT) and trying to communicate with a Grandstream BudgeTone 102 SIP phone which is behind NAT. The BudgeTone is at firmware level 1.0.4.30 and Asterisk is from CVS about a week ago. My problem is that I'm only getting half-duplex communication -- I can hear voice from the Asterisk server but the server does not understand any voice from

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

I'm looking to purchase and deploy a bunch of hardphones for agent use. The phones will have to register with Asterisk and/or SER, depending on where the phones go. They need only one line, G729 codec, and no super fancy features. Preferrably something that is easy to provision. I would think the BudgeTone would be good, but then I've read so many people complaining about them, and some

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040709/2e9bd3f6/attachment.htm -------------- next part -------------- ? Hi there, This is shan. I need help regarding the grandstream Budgetone - 100 phone which i configured. My problem is: I can able to do call ---> Softphone(PC) ---> * ---> Grandstream Budgetone-100 but

Hi All I have 3 GrandStream BudgeTone-100's which connect to an * box with a HFC-S based ISDN card using ISDN4Linux. I have setup the BudgeTone-100's to use Early Dial which for calling between the three phones works well, but for the external calls using the following extension exten => _9.,1,Dial(Modem/g1:${EXTEN:1}) Only the first digit is dial on the ISDN Line. Does anyone know of

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

Ronald, Grandstream products have a one year warrantee. If you don't have any luck with Pulver, contact us and we can probably get your phones exchanged. Please don't assume that your experience with Grandstream is typical. We sell a lot of these phones and the overwhelming majority of the purchasers are very happy with their units. The quality has improved tremendously over the last

I have two problems with Asterisk and my Budgetone 100s. 1. Sometimes when outside callers dial my Budgetone it will ring twice, then the caller will receive a busy signal. This happens intermittently and I cannot pin down the circumstances of when it works and when it doesn't. Asterisk logging doesn't give me too much info when this happens: *CLI> -- Executing

Since firmware 1.0.3.81, unless I'm imagining things, Voicemail2 seems to be having problems. The Grandstream and sip.conf were set to RFC2833 now with that setting I get extra digits during "Mailbox" and "Password" phases. 222001 instead of 2201 for example. When both are changed to "SIP info" there is no problem. But what is the new setting "DTMF Payload

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

I've seen lots of stuff go around about Grandstream firmware levels (in my case specifically the BT101/102). I'm just wondering what the currently accepted 'best' firmware version is to use? After seeing stuff going around about buggy firmware I want to know what I'm getting into before upping past my current 1.0.5.11. It's relatively stable, and the last thing I want

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the