similar to: WTB / WTS Voip hardware

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

Mine has been working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven

Hey guys, I've had a working Asterisk setup going for a while now, but am having problems with the Zhone Zplex 10b thinking that during ringing, an extension has answered the call when infact it hasn't. This only seems to happen on some of the ports and doesn't appear to be specific to the handset. Does anyone have any suggestions as to how I could go about fixing this (aside from

hello all, I still experience the random off-hook on my fxo cxhannels, i am using a zplex-10b channel bank. which does not allow me to call out. The situation still persists...this is what i have in the zapata.conf [channels] context=internal context=incoming context=default usecallerid=no usecallwaiting=no signalling=fxs_ks channel=1-8 signalling=fxo_ks channel=16-24 but i still have the the

Is there a way to initiate a transfer using an analog handset? For instance I'm looking for a way to do something like the following: External call comes in and is answered by user A. After talking to the caller they determine that the caller really needs to speak to user B. Is there any way for user A to initiate a transfer to user B, using only their analog handset? Now to make

This may be a long shot, but I suppose it can't hurt to ask! I have seen chatter regarding Zhone channel banks amongst the asterisk users primarily. In all of my searching I am guessing that the majority of people using the Zhone's are probably reading this, and with the support that I have seen from Zhone so far this is probably my best bet, I recently picked one up for a project

Hi I have the last firmware for zplex, if you like i send it to you, about the second question 24s means 24 extensions so you can configurate as you wish as fxo or fxs. Att Yelson Vivas

hello * users, i am using a zplex 10b(8fxosand 16fxs) connected to a T100 digium card, RH8.0. soon after running * i get this warning "file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error on channel 'zap/7-1' then executes the other applications itself. --executing Wait("Zap/7-1","1") in new stack. -- executing..... it gives the same warning

I have just make zhone set2default to factory default setting. What do i have to do to make T1 interface zhone match with T100P.

HI Asterisk Gurus I'm connecting my * server to a zplex 10B, I'm using a slot on my TE410P card as T1 to connect my server to the channel bank (i use a cross cable), the zplex doesn't show any alarm neither the server. I'm trying to make calls from (ext 1) from the channel bank, to other (ext 2) in the same channel bank, but when I dial the ext number, the dialtone doesn't

Greetings, I have just purchased several Astra 390 phones ready for asterisk. I have placed a line with adsi=yes in the Zapata.conf file just before channel => 13 I have also added an extension exten => 6199,1,ADSIProg(asterisk.adsi) exten => 6199,2,Hangup in the extensions.conf file. When I try to program the phone I get the following: Asterisk CVS-03/28/04-12:02:10,

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is

If anyone is looking at upgrading their Digium hardware, or has an excess of any of these cards, please let me know. I am not interested in non-Digium hardware, but thanks for asking :) E100P E400P TE410P I only need one card, in that preference order. Would also prefer if the card is already in Australia. I'm in Sydney/Australia if that matters to you. Regards, Adam -- Adam Goryachev

Hi, I am looking to buy 2 used 1 or 4 ports E1 Cards. If you have one, would you please contact me? Thanks, Pete -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081217/48afd68d/attachment.htm

Attention Management and Sales. Remember the computers you bought for either yourselves or for your customers. Remember all the software that came with them that was useless to you and you didn't know what to do with it. Maybe you bought systems that came with Windows 95 or 98 and you needed Windows NT or some other operating system. Until now that software just collected dust in your store

Hi all, I'm currently evaluating ideas for a phone system for our new office and I have a copy of Asterisk along with a couple of H.323 phones setup in the lab here. I'm very impressed - thanks for the great software! (I was especially impressed that the IAX connection to Digium worked out of the box like that - someone at Digium no doubt has a voicemail from me this morning!) ;-) What

G'day, I am new user to R, and have been thrown in the deep end with a something my company want me to write. my code is as follows: kenttemp=read.csv("mnowak.11.1.csv") rows=nrow(kenttemp)-5 kent=kenttemp[1:rows,] #have to remove the last 5 lines of the graph as they interfere with rest of data max(kent[,16],na.rm=TRUE)->ymax ymax=ymax+200 #This is to get

Hullo again, all :) If you're using * to run telephony in a real business environment, can I trouble you to write a short paragraph about the setup, and how you've found the migration / daily use? I'm simply trying to add weight to the business case for new * installs, especially for those who have a very conservative management structure. Like I say, I'm not looking for a case

I'm hoping that someone else has seen this problem. Running CVS version from 03/08/03 20:00 T100P -> Zplex-10 All internal call routing seems to work fine. Atempts to make calls on the FXO interface fail. Asterisk picks up the correct number dialed but there seems to be a problem with the Zplex transmitting that number on the POTS line. All attempts to dial out fail with the LEC giving

Skipped content of type multipart/related-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 8438 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20031104/c01dd8df/attachment-0001.gif