similar to: SJphone, Asterisk and DTMF tones ...

What options do the others offer over one another? Is there a difference, or is it simply a case of one superseding the other? Would be good to put something together that details the different methods, and which situations maybe they better suit, if any. Ben -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

Folks, We have several people using SIP softphones in the office. When they leave for the day, they power down their workstations, causing their registration with Asterix to quickly timeout. Here's the entry for one such extension in extensions.conf: exten => 8102,1,Dial(SIP/someone,20) exten => 8102,2,Voicemail(u8102) exten => 8102,3,Hangup exten => 8102,102,Voicemail(b8102)

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

Folks, I've been following recent discussions regarding echo and echo training with much interest, since it's a problem we've never been able to eliminate here. We're facing two challenges presently, and they may be related (or not): a) Cisco 7960s in the office here echo back to our staff, but the customer hears decent sound. b) We've yet to be able to pass faxes through

I just installed the new version of SJPhone and it appears that it cannot work with * anymore? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040111/25c910bb/attachment.htm

We're having some difficulty connecting a T1 fax board card to asterisk, with E&M Wink. We've successfully connected it to other E&M Wink T1s, but have been unable to get asterisk to hear it's dialing. Asterisk can dial down to it with no problem, and it hears all the digits, but whenever it sends digits down to asterisk, * always only "gets" the first one. This is

Hi, i'm sorry but i dint actually understand what u asked for, Like do u want to know exactly what error message i'm getting or the configuration of the pc's in which i get these errors ?? Sorry for being so stupid :-)) Bye, Jassi > >Jaspreet oberoi wrote: > > Hi,, > > > > I wud just like to inform that the previous issue of memdisk not booting > >

T.38 is often put forward as the solution for reliable FAX over VOIP. Just wondering for anyone using T.38 (with any equipment), how well does it work as compared to a FAX PSTN call? Thanks. Jim James H. Thompson jht@lj.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041129/3ea08b2c/attachment.htm

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Hello, I have spandsp setup to accept incoming faxes and receiving tif files via Email. Using tiff2pdf, or tiff2ps -a2 or even tiffsplit, the last page of the fax is cut off and the quality of the text looks "squished". I "figure" it's a tiff parsing thing, as opposed to a problem with my spandsp installation (heh). Has anyone experienced the same thing, or can

Hi, I'm getting an issue while executing AMI Originate. I'm getting "extension does not exists" on Originate's Response, and on the other hand Asterisk CLI say "fwrite() returned error: Broken pipe" Please suggest me what is wrong. Muhammad Faheem ### my originate code block ...

What are your experiences with faxing through Asterisk to the PSTN? We are using g.711u as a codec, and are originating/terminating with Broadvox as well as through our own PSTN gateways. We have had some luck with incoming faxes coming into our network from Broadvox DIDs. They work 50% of the time. Not sure yet on PSTN incoming since nobody that is using FAX is in our local rate centers.

I'm trying to get a Carrier Access Corp. Channel Bank I working with a Digium T100P without success. What is stranger is that the status lights on the channel bank and T100P seem to change almost each time I power cycle the channel bank or reset the T100P. The channel bank has three status lights: T1, Framing, Status. T1 is green, Status is yellow, and Framing is usually red but sometime

I have an NFS4 server exporting a folder, and a Samba server importing that folder which it then turns around and shares over Samba. I would like Windows machines accessing this folder and its sub folders to be properly restricted according to ACLs. The NFS4 server is running CentOS 5.7 and is NFS exporting an EXT4 folder. The Samba server is running CentOS 6.0, and Samba 3.5.4-68.el6_0.2. On the

Hi, I've tired to forward a Fax from Asterisk to Hylafax. It works so far until I tried with a Fax machine. I just got error shown in the log below. I'm not sure why. I've tested it with other 6 machines and they all work fine. Do you have any idea why? Pim Hylafax Session log: Apr 12 11:16:48.82: [ 5933]: SESSION BEGIN 000000078 492212601860 Apr 12 11:16:48.82: [ 5933]:

Folks, First of all, this email is sent to -users and -biz, but please follow- up to the -biz list only. I have set the reply-to, but I fear mailman will strip it off ... Please don't flame me for posting to -users, I'm just not sure who lives on -biz as the (signal/noise | net.kook | troll) factor has been pretty bad on that list lately (poor Rehan!!) ;-) Telephony Depot

Hi, does anyone have any recommended (read tried and tested) way of making asterisk be able to handle incoming faxes. I've a PC running asterisk with a digium E1 card in and simply want to be able to route a call to some application which will take a fax call and save the fax as an image. I guess the bits I'm unsure of are how to terminate a fax call without a modem (if this is

Reason I ask is I may have a non-voice T-1 replacement project going on and I'm investigating my various options. Costs may be about the same for turn-key and DIY. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Thursday, February