similar to: SIP, Sipura SPA-2000, and Voicemail2

May be I have fiddled too much with my sipura settings but I can't get it to give the stutter tone when there is a new voice mail waiting on the asterisk box. I can either get a stutter tone all the time or not at all. Anyone got this working. Thanks Chris

I have a Sipura SPA2000 2 line SIP FXS box with line 1 on port 5060 and line 2 on 5061. The SPA2000 is on IP address 192.168.17.6, and the asterisk box is on 102.168.17.2. Both SPA2000 ports(5060 and 5061) share the same IP address. Every minute I repeatedly get the following output: SIP Debugging Enabled 10 headers, 0 lines Reliably Transmitting: OPTIONS sip:192.168.17.6 SIP/2.0 Via:

Hi, I'm using the SPA-2000 with firmware 1.06 on the Asterisk PBX, which works great for taking and placing calls, but for for some reason I can't seem to clear the stutter dialtone by either calling the extension I'm on, or the voicemail system on the Asterisk PBX. If I call my voicemail access extension directly, It tells me I have no messages waiting, yet when I hang up, then

This is a wierd one. Can't figure it out. I have an SPA-3000 at the house handling my incoming line. It's setup to direct the incoming call to asterisk. Works great 99% of the time. A few times a day, I'm getting calls that ring once internally and are then hungup. I managed to get a detailed log [1] of what's happening today and it looks to me that the SPA is acting wierd.

We've been testing (aim:frziegler and aim:end1r) the Voicemail2 app for a few days now, based on a CVS build from Monday, 5/12/03-23:15. Works good! Thanks Mark! We seem to have found a bug in the MWI (Message Waiting Indicator) logic. By simply creating msg0000.txt files in both structures, e.g.: for extension 4000: voicemail1: /var/spool/asterisk/vm/4000/INBOX/msg0000.txt

Besides email notification, is there another way to get asterisk notify the user that they have a message? Example: Some analog phones have a blinking light that lets the user know that they have a voicemail message. Is asterisk capable of doing this?

Hi Lee, You need to specify the VM context that you are using.. so using your examples.. extensions.conf entry.. exten => 1000,1,Dial(SIP/1000,20) exten => 1000,2,Voicemail2(u1000) exten => 1000,102,Voicemail2(b1000) exten => 1000,103,Hangup should be.. exten => 1000,1,Dial(SIP/1000,20) exten => 1000,2,Voicemail2(u1000@sip) exten => 1000,102,Voicemail2(b1000@sip) exten

Greetings, The Polycom SIP 1.5 Admin Guide says this: "3.1.8 Connected Party Identification Where possible, the identity of the remote party to which the user has connected is displayed and logged. The connected party identity is derived from the network signaling. In some cases the remote party will be different from the called party identity due to network call diversion."

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

I have a cisco 7940 with the following sip.conf config: [Desk1.1] type=friend secret=****** defaultip=192.168.1.14 insecure=no mailbox=102 callerid="Desk1.1" qualify=500 canreinvite=no context=extensions host=dynamic group=2 I do not get message waiting indicator (mwi) on this phone. Is the another .conf file invilved in configuring this function other than the mailbox=xxx in the

I remember seeing something like this on the list a while ago, but I'm darned if I can find it. We have a number of Polycom IP501 phones, some of which have more than one registration on them. When a voicemail is left for a phone with only one registration, the MWI lights up and stays lit until the voicemail is listened to. However, on our phones with more than one registration, the MWI

You can even set it to zero. Mine works well when in zero. The line pick up immediately :> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chris Stenton Sent: Thursday, February 09, 2006 6:57 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN

Hi.. I am about to replace my aging Nortel Venture system with an Asterisk system and 6 Polycom IP 501 phones, and a couple sipura 841's for less used areas. We have 3 phone lines here. One is SBC, one Vonage, and one Voipjet... One hangup is that I can't figure out how to pass through a voicemail waiting indication from SBC. This is important because my wife and her family all

I heard Sipura had really awesome documentation on the SPA-2000 and SPA-3000, but you have to email them for it. When I did, they said I had to get it from a reseller. It's been a while since I bought my units, I don't even remember where or who they were bought from. Can somebody email me the documentation for these devices? I'm quite interested in knowing what every one of their 200+

I had a Grandstream 286 at my home hitting my Asterisk box at the office, all worked well and I received phone calls fine until the device just up and died. I replaced this unit with an SPA-2000 because I have been impressed with the Sipura devices and decided to use them for most of my needs in the future. Problem is that my phone attached to the device rings shortly after power up of the

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I

I am looking at some lower cost phone to use with Asterisk. What is the ArtDio IPF-2000 or the Sipura SPA-841 like? Also, I see voipsupply.com has an ArtDio IPF-1000 listed, is this a new or an old model? I cannot find any information on it. Adi

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

I've noticed something strange when saving a new message to the new messages folder. The message number gets incremented (message0000 becomes message0001), then voicemailmain2 thinks that there are no new messages to be played, but the MWI stays on, and the end user tries in vain to retrieve a message that can't be played.

Greetings, We are currently testing a Sipura SPA-3000 as a gateway from our Asterisk system to a PSTN line for 911 access. We have a number of locations and want to place an SPA-3000 in each, connected to a PSTN line that will provide the correct ANI/ALI information to 911 for each location. It all works great, except for a reasonably significant (4 seconds) delay between when the SPA-3000