similar to: To SIP or Not?

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi again, I found chan_skinny and that seems to work pretty good. the SCCP one filled out all the buttons really nice, but skinny seems to be working. How do I fill out the second line button on the phone with skinny.conf? Thanks much! ...Jeff

Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

Hi all; I have been searching for an answer to a question that a customer asked me and I have only found a few older answers. So, wanting to find out if anyone has any experience with this issue and can help provide me with some advice. I have a customer which is strongly interested in using Asterisk as a PBX. One of the core requirements, however, is that the system MUST be able to

Maybe not the place for this but thought I'd post the info for others. I purchased a cisco 7960 off ebay and needed to convert to SIP for *. I know * supports SCCP but I wont go into that here. I'd read on voip-info.org that a contract could be purchased for approx $8 to allow me to download the firmware. I though, being in the UK, i'd get one through a reseller in the UK.

Hi all, I'm writing my graduation theses : analysis VO-IP protocols , and I cannot find any documents about Cisko Skinny Client Control Protocol. I have Cisco CallManager and some IP-phone and I'm sniffing traffic between that, but I don't understand, how this protocol works. Clearly i'm looking for description of SCCP commands and explanation some basic SCCP scenarios or what

Hi! I have two, not too related questions: - the probably simpler one: if anyone can help me out using a Cisco 7905G with chan_sccp? I did already managed to get it working with a SIP image, I'd just like to see it work with this one as well. It's probably something I screw up with the configuration, as the phone registers, only I don't get any lines with it, although I have it

Hi All, I'm thinking of creating a new asterisk server using the latest 1.4 stable release to replace my ageing Asterisk SVN-branch-1.2-r7231 (its been a while!). My only concern - my phones are Cisco 7960's (with sccp firmware 7.2 loaded) and to support them better, I remember compiling in a skinny(?) driver to replace the (from what I could tell) basic in built sccp support. After

Hi all, Sorry this is a little of topic but, I have just received our 10 cisco 7940 phone. I want to change them to sip but it seems that I need a support contract with cisco. I'm in the UK does anybody know were to go to get one or how much it will cost :-( Thanks, David Stubbs Idessa UK Ltd.

Hi, I have the following config: [7960] <--skinny--> [Cisco CCM] <--SIP_trunk--> [asterisk] <--SIP--> [X-lite] Is there a chance to avoid the RTP stream from passing through the Cisco CCM ? I would like to have all RTP handled by the *. This is just a testbed, for a larger project. What I want to achieve, is actually this: [Cisco Phone] <--skinny--> [Cisco CCM]

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ

Hello, I'm considering using Asterisk with some type of Cisco phone, and currently considering either the 7940 or 7960 because of its more-complete functionality (compared to the 7905). I'm currently wondering: Do all the expected functions (transfer, conference, voice mail, message waiting indicator, etc.) work normally with Asterisk over SIP? What caveats are known about using

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031201/c9e420c5/attachment.htm -------------- next part -------------- Hello all, I have 1 IP 7940 with the following Firmware versions App Load ID: P00303011201 Boot Load ID: PCO303010001 Version 3.1(12.1) Could you please confirm, if my IP phone has the correct SIP image. My asterisk

I could use some skinny/Cisco help here. Was finally able to get the phone registered to * but whenever someone tries to call that phone it freezes and reboots itself. Same thing happens when you pick the handset up off the 7960G; it locks and reboots about 5 sec later. Here is what * shows when I plug the phone in: -- Starting Skinny session from 64.72.107.1 Device SEP000F3442E4A7 is

I found a few mentions of the 7914 being used with Asterisk, these all covered SCCP/skinny though. Does anyone know if the 7914 can even be used with SIP? If so, any pointers? Is it a services thing? Anyone get the operator (line/extension status) to work with it. Thanks for the help, Cisco doesn't even mention ANYTHING about SIP + the 7914. Matt

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1