Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7] What additional information would be required to troubleshoot this? or should I stop wasting time and just convert the phone to SIP? :) regards Wil -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061030/1235e58c/attachment.htm
Alberto Pastore
2006-Oct-30 23:56 UTC
[asterisk-users] Cisco 7960 Skinny calling SIP phone
Well, I've never actually been able to make chan_skinny work with 79xx
phones.
I found the chan_sccp to work quite well:
http://chan-sccp.berlios.de/
plus this patch for a problem on MeetMe (I don't remeber where I found
it, but it works!):
diff -uNr chan_sccp-20060408.org/sccp_pbx.c chan_sccp-20060408/sccp_pbx.c
--- chan_sccp-20060408.org/sccp_pbx.c 2006-04-08 14:20:17.000000000 +0200
+++ chan_sccp-20060408/sccp_pbx.c 2006-05-17 17:14:15.000000000 +0200
@@ -290,6 +290,12 @@
static int sccp_pbx_answer(struct ast_channel *ast) {
sccp_channel_t * c = CS_AST_CHANNEL_PVT(ast);
+ // if channel type is undefined, set to SCCP
+ if (!ast->type) {
+ sccp_log(1)(VERBOSE_PREFIX_3 "SCCP: Channel type
undefined, sett
ing to type 'SCCP'\n");
+ ast->type = "SCCP";
+ }
+
if (!c || !c->device || !c->line) {
ast_log(LOG_ERROR, "SCCP: Answered %s but no SCCP
channel\n", as
t->name);
return -1;
I recommend using SIP firmware anyway... the conversion process is a bit
annoying but
as far as now 7940/7960 are really stable IP phones.
I am currently using chan_sccp only for 7902 phones (I've just got 2 of
them....)
which do not support SIP firmware.
Will Roy ha scritto:> Before I got down the path of converting a Cisco 7960 I have over to
> SIP I wanted to try and set it up using Skinny.
>
> The phone registers ok with Asterisk. When I call a SIP softphone
> extension on my network the call is made and I can answering it.
> However no voice is heard over the call.
>
> When I debug Skinny on the console after the call has connected I see
> the following messag:
>
> Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7]
>
> What additional information would be required to troubleshoot this? or
> should I stop wasting time and just convert the phone to SIP? :)
>
> regards
> Wil
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
--
Alberto Pastore
B-Press Srl - Gruppo MSoft
P.IVA 01697420030
P.le Lombardia, 4 - 28100 Novara - Italy
Tel. 0321-499508
Fax 0321-492974
http://www.msoft.it
Anthony LaMantia
2006-Oct-31 09:57 UTC
[asterisk-users] Cisco 7960 Skinny calling SIP phone
Which asterisk release are you running chan_skinny under? ----- Original Message ----- From: Will Roy <willroyvi@gmail.com> To: asterisk-users@lists.digium.com Sent: Monday, October 30, 2006 7:52:01 PM GMT-0600 US/Central Subject: [asterisk-users] Cisco 7960 Skinny calling SIP phone Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7] What additional information would be required to troubleshoot this? or should I stop wasting time and just convert the phone to SIP? :) regards Wil
I am running 1.4.0-beta2
Date: Tue, 31 Oct 2006 10:57:06 -0600 (CST)
From: Anthony LaMantia <alamantia@digium.com>
Subject: Re: [asterisk-users] Cisco 7960 Skinny calling SIP phone
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Message-ID:
<18975956.15221162313826243.JavaMail.root@jupiler.digium.com>
Content-Type: text/plain; charset=utf-8
Which asterisk release are you running chan_skinny under?
----- Original Message -----
From: Will Roy <willroyvi@gmail.com>
To: asterisk-users@lists.digium.com
Sent: Monday, October 30, 2006 7:52:01 PM GMT-0600 US/Central
Subject: [asterisk-users] Cisco 7960 Skinny calling SIP phone
Before I got down the path of converting a Cisco 7960 I have over to SIP I
wanted to try and set it up using Skinny.
The phone registers ok with Asterisk. When I call a SIP softphone extension
on my network the call is made and I can answering it. However no voice is
heard over the call.
When I debug Skinny on the console after the call has connected I see the
following messag:
Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7]
What additional information would be required to troubleshoot this? or
should I stop wasting time and just convert the phone to SIP? :)
regards
Wil
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061031/83036d19/attachment.htm