similar to: Fw: problem zplex 10 B

Hi I have the last firmware for zplex, if you like i send it to you, about the second question 24s means 24 extensions so you can configurate as you wish as fxo or fxs. Att Yelson Vivas

HI Asterisk Gurus I'm connecting my * server to a zplex 10B, I'm using a slot on my TE410P card as T1 to connect my server to the channel bank (i use a cross cable), the zplex doesn't show any alarm neither the server. I'm trying to make calls from (ext 1) from the channel bank, to other (ext 2) in the same channel bank, but when I dial the ext number, the dialtone doesn't

Hi Guys I am new working with lumenvox products, and unfortunately I had not been able to install it properly, I follow the steps in lumenvox site and it looks like it works I mean: ========================================================= [root at pbx-millenium examples]# ./example 127.0.0.1 Connecting to 127.0.0.1 Interpretation 1: 8587070707 count=0, decode returns 1 Interpretation 1:

Hi Guys I'm conecting 2 astersk servers using this arquitecture (Ext softphone)<==sip==>(asterisk 1)<====iax2 trunk====>(asterisk 2) <===alaw==>(pstn) If i call from the Ext to the asterisk 2 the sound is perfect, but if i call from Ext to the pstn, i can hear perfect but they tell me that sound really choppy, i tried using several codecs (same problem) but i

Hi everybody i have a problem trying to connect an incomming phone call from pstn to my (soft phone) iaxcomm, the phone rings but when i try to answer the call, asterisk sends a message like this. Jun 1 19:33:17 NOTICE[5013528]: channel.c:1223 ast_read: Dropping incompatible voice frame on IAX2[192.168.222.99:4569]/16 of format GSM since our native format has changed to ALAW i'm working

Hi Everybody I'm connecting a zplex 10B to a TE410P card on my asterisk server (i use a cross cable), the zplex doesn't show any alarm neither the server. I'm trying to make calls from 1 line from the channel bank, to another, but when I dial the ext number, the dialtone doesn't stop... every way i make the call and the called extension rings but when i pick up the phone i just

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

I'm hoping that someone else has seen this problem. Running CVS version from 03/08/03 20:00 T100P -> Zplex-10 All internal call routing seems to work fine. Atempts to make calls on the FXO interface fail. Asterisk picks up the correct number dialed but there seems to be a problem with the Zplex transmitting that number on the POTS line. All attempts to dial out fail with the LEC giving

Mine has been working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven

Hey guys, I've had a working Asterisk setup going for a while now, but am having problems with the Zhone Zplex 10b thinking that during ringing, an extension has answered the call when infact it hasn't. This only seems to happen on some of the ports and doesn't appear to be specific to the handset. Does anyone have any suggestions as to how I could go about fixing this (aside from

I've got a Wildcard T100P along with a Zhone Zplex 10 24S/O which has been working fine for me now for a while. These have been pulled out of a working Asterisk installation (as they were no longer required) to use at home only to find that the fan noise is too loud. As such I'm looking to sell off this hardware and replace it with some combination of fanless hardware that will allow me to

I came across this hack while looking through chan_zap.c. Is this still applicable for those w/ zplex cb's? Is it a maybe need or an absolutely need? Any background info would be appreciated. Sincerely, Andy Hester Consero (817)375-1244 (817)937-7977

Im configuring a server, to provide internet to 5 machines, with a dsl connection. I m not in familiar with bandwidth shaping, so Im going to start reading about it. What Im looking is something which let me assign the bandwidth in a dynamic way.(dynamic bandwidth allocation). For example: If I assign X bandwidht to each PC.(equal), and Pc1 is not using the %100 of the bandwidht

It was my fault, as you have seen. Y matrix must contain successes and failures, and not successes and trials. Sorry for my ignorance and thanks a lot for your help. Oscar -------------- next part -------------- An HTML attachment was scrubbed... URL: https://stat.ethz.ch/pipermail/r-help/attachments/20001220/341c2519/attachment.html

Is there a way to initiate a transfer using an analog handset? For instance I'm looking for a way to do something like the following: External call comes in and is answered by user A. After talking to the caller they determine that the caller really needs to speak to user B. Is there any way for user A to initiate a transfer to user B, using only their analog handset? Now to make

I am trying to get a program called " Incredimail " working for my partner , she is love with it, and is stopping me from fully going to Ubunut. It seems to really on IE 5.5 +, along with VisualBasic C++. It loads up and installs, but wont run. Has anyone had any experience with this program, and getting the various C++ libs installed correctly..

hello all, I still experience the random off-hook on my fxo cxhannels, i am using a zplex-10b channel bank. which does not allow me to call out. The situation still persists...this is what i have in the zapata.conf [channels] context=internal context=incoming context=default usecallerid=no usecallwaiting=no signalling=fxs_ks channel=1-8 signalling=fxo_ks channel=16-24 but i still have the the

I get a bit different messages. When I run IncMail.exe or ImApp.exe I get a window, visible on the screenshot (http://omploader.org/vMThjMg), that says: "Error: failed to create Message Store." To get to this point I used winetricks to install ie6, flash, msvc2005 and wininet. Output of IncMail.exe: Code: szczerb at nomad ~ $ wine .wine/drive_c/Program\ Files/IncrediMail/bin/IncMail.exe

Hi, I am almost ready to switch over from 2.2.7 to 3 but found that a user profile created in 2.2 doesn't work in 3- ie; during login to a Samba 3 server, an error occurs and profile modifications are not permitted or recognized. This may seem trivial but I have 50 users, each with complex desktop setups which help them with there daily tasks of CG post production (so some of you know

Hi, I tried to upgrade from Samba 2.2.8a to 3.0. It worked generally speaking fine and speed went up tremendously, BUT since then the DOS conversion of long file names is freaking me out. Using long file names produced a readable short version plus ~1 oder ~x. where x stands for a number. now long file names produce some cryptic 8 letter name plus extension. listing in a DOS box