similar to: zhone z-plex 10

I've just received a brand new zhone z-plex 10b. At first, I was able to login using the default (admin/zhone), and started exploring with the configuration, trying to set it up to work with the TE410P. Somehow the admin password was changed, but I don't know what it is anymore. So now I'm stuck at the login prompt, and can't get back to the CLI.... Is there a way to reset the

Wondered if anybody might have some ideas about what could be causing this.... I have a T100p hooked up to an Adit 600 with 12 channels of voice off of a T-1 coming in. I have a t100p connected to a zhone z-plex with 24 fxs going to my stations. Some of the station are 2 line phones. These have 2 zap channels that are dialed when the extension is matched. Also, some extension require ringing 2

Hi, I have a mint, like-new (used only once) Zhone Z-Plex channel bank for sale. It has 16 FXS and 8 FXO (part number: Z-PLEX-10-24S/O). It functions as a channel bank, router, and CSU/DSU, combining T1, analog voice, and data. D4, SF, and ESF line formats are supported with AMI or B8ZS coding. It has dual T1 jacks, one ethernet jack, one serial port, one V.35 port, and 24 analog pairs

I've recently begun integrating an Asterisk system into my house. I purchased the Dev Kit a year or two ago when Digium was selling it as a Z-plex 10 channel bank with the T100P. I've recently found that when I connect the serial monitoring port to my system it introduces a noticable hum on my incoming FXO lines. Anyone know (or have suggestions about) how to prevent this? -- Jamin

Hello I have serious problem with zhone z-plex 10 the device sometimes get red alarm on some channel and then the device suddenly shutdown. I try to unplugged the power chord and plug again, but the device still didn't up. I have to wait for long time to get this device up again. How can i fix this problem, so i can get this device immediately? Eris Riswanto

We were just testing forwarding one of our numbers to a VoIP CLEC and ran into an issue that we've seen before but never figured out the cause of. It seems if you call us and immediately hang up - or if the call is forwarded by Verizon (which stills rings about ? of one time) the Zhone detects the ring and answers the call.. The Zhone however DOESN"T detect that it's no longer

Everyone - thought I would pass on a useful piece of information. Finally got a solution to my phantom ringing problem. Problem - the zhone is triggered into detecting ringing by the Automatic Line Insulation Tests (ALIT or LIT) run nightly automatically by the telco. Here it is twice between 8pm and 9pm on my particular lines. My first approach before I knew specifically the buzzword for

This may be a long shot, but I suppose it can't hurt to ask! I have seen chatter regarding Zhone channel banks amongst the asterisk users primarily. In all of my searching I am guessing that the majority of people using the Zhone's are probably reading this, and with the support that I have seen from Zhone so far this is probably my best bet, I recently picked one up for a project

Mine has been working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven

Hey guys, I've had a working Asterisk setup going for a while now, but am having problems with the Zhone Zplex 10b thinking that during ringing, an extension has answered the call when infact it hasn't. This only seems to happen on some of the ports and doesn't appear to be specific to the handset. Does anyone have any suggestions as to how I could go about fixing this (aside from

I have just make zhone set2default to factory default setting. What do i have to do to make T1 interface zhone match with T100P.

I've picked up a few Zhone channel banks that I currently am using to test. I've been ready to go into production but I'm a little worried by their behavior. Yes, I've read that they are evil and unsupported by their masters. No, I'm not using the data port. I just need a channel bank. Well, sometimes, when a phone is ringing, * reads that the line picked up even though the

I've got a Zhone 24 port FXS to configure. The configuration is beyond stupid. The people that designed this unit should be chased down and fired. I'm going around in circles frigging with all the options. Does anyone have a config file for this unit that I can use as a starting point? -bill wlloyd@slap.net

I have been playing with Asterisks for about 6 months, and have fallen in love with it. I have finally taken the plunge and gotten a T100P and a Zhone Zplex-10B (24FXS) channel bank. I have read everything that I can find on the mailing list, checked wiki, even searched the web with google. I believe that most everything is configured right The drivers load without error, and asterisks

I came across this hack while looking through chan_zap.c. Is this still applicable for those w/ zplex cb's? Is it a maybe need or an absolutely need? Any background info would be appreciated. Sincerely, Andy Hester Consero (817)375-1244 (817)937-7977

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been seeing some strange issues recently as it relates to our Asterisk phone system. Let me give a little background on things: We have a T1 provided by Knology. We recently had an outage of Internet and phones. The following problems (except for the log messages) seemed to have cropped up after the outage. I was prompted by a friend of mine

That was my initial setup before trying the abbreviations, but anyway: [root at plexvm ~]# nano /etc/fstab [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file,

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

On 4/3/20 12:48 PM, Patrick DERWAEL wrote: > User & pass are present > According to the man pages, workgroup is supported > I have changed it to domain, but that didn't change a thing > > [root at plexvm ~]# cat /etc/fstab > > # > # /etc/fstab > # Created by anaconda on Fri Apr 3 14:02:23 2020 > # > # Accessible filesystems, by reference, are maintained

> Hi all, > > I'm tearing my hair off trying to understand the difference between C7 & > C8 > for mounting a cifs FS with fstab > > I'm building a Plex media server on C8 and duplicated the fstab entries > over from my current C7 installation > My data (music & movies) are on CIFS shares on a Synology NAS. > The packages cifs-utils samba-client