User & pass are present According to the man pages, workgroup is supported I have changed it to domain, but that didn't change a thing [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file, run 'systemctl daemon-reload' to update systemd # units generated from this file. # /dev/mapper/cl_plexvm-root / xfs defaults 0 0 UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 defaults 1 2 /dev/mapper/cl_plexvm-swap swap swap defaults 0 0 //192.168.1.200/mp3 /home/plex/Musique cifs user=plex,pass=plex,domain=DERWAEL,ro,auto,vers=3.0 #//192.168.1.200/videos /home/plex/Vid?os cifs user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 #//192.168.1.200/series /home/plex/S?ries cifs user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 [root at plexvm ~]# systemctl daemon-reload [root at plexvm ~]# mount -a mount error(2): No such file or directory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) [root at plexvm ~]# Le ven. 3 avr. 2020 ? 18:23, Leon Fauster via CentOS <centos at centos.org> a ?crit :> Am 03.04.20 um 18:01 schrieb Patrick DERWAEL: > > Le ven. 3 avr. 2020 ? 17:54, Jonathan Billings <billings at negate.org> a > > ?crit : > > > >> On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: > >>> //192.168.1.200/mp3 /home/plex/Musique cifs > >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>> //192.168.1.200/videos /home/plex/Vid?os cifs > >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>> //192.168.1.200/series /home/plex/S?ries cifs > >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >> > >> Try removing non-ascii characters from your mountpoints and try again. > >> > >> -- > >> Jonathan Billings <billings at negate.org> > >> _______________________________________________ > >> CentOS mailing list > >> CentOS at centos.org > >> https://lists.centos.org/mailman/listinfo/centos > >> > > > > I have commented out the 2 mounts with non-ascii... that didn't help... > > > > > > [root at plexvm ~]# cat /etc/fstab > > > > # > > # /etc/fstab > > # Created by anaconda on Fri Apr 3 14:02:23 2020 > > # > > # Accessible filesystems, by reference, are maintained under > '/dev/disk/'. > > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more > info. > > # > > # After editing this file, run 'systemctl daemon-reload' to update > systemd > > # units generated from this file. > > # > > /dev/mapper/cl_plexvm-root / xfs defaults > > 0 0 > > UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 > > defaults 1 2 > > /dev/mapper/cl_plexvm-swap swap swap defaults > > 0 0 > > //192.168.1.200/mp3 /home/plex/Musique cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > #//192.168.1.200/videos /home/plex/Vid?os cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > #//192.168.1.200/series /home/plex/S?ries cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > [root at plexvm ~]# mount -a > > mount error(2): No such file or directory > > Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) > > [root at plexvm ~]# > > > > > > username=value > password=value > domain=value > > ? > > -- > Leon > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos >-- Patrick Derwael Rue de la fontaine, 3 4210 Burdinne T?l:+32.(0)479.80.50.79
On 4/3/20 12:48 PM, Patrick DERWAEL wrote:> User & pass are present > According to the man pages, workgroup is supported > I have changed it to domain, but that didn't change a thing > > [root at plexvm ~]# cat /etc/fstab > > # > # /etc/fstab > # Created by anaconda on Fri Apr 3 14:02:23 2020 > # > # Accessible filesystems, by reference, are maintained under '/dev/disk/'. > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. > # > # After editing this file, run 'systemctl daemon-reload' to update systemd > # units generated from this file. > # > /dev/mapper/cl_plexvm-root / xfs defaults > 0 0 > UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 > defaults 1 2 > /dev/mapper/cl_plexvm-swap swap swap defaults > 0 0 > //192.168.1.200/mp3 /home/plex/Musique cifs > user=plex,pass=plex,domain=DERWAEL,ro,auto,vers=3.0 > #//192.168.1.200/videos /home/plex/Vid?os cifs > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > #//192.168.1.200/series /home/plex/S?ries cifs > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > [root at plexvm ~]# systemctl daemon-reload > [root at plexvm ~]# mount -a > mount error(2): No such file or directory > Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) > [root at plexvm ~]# > > Le ven. 3 avr. 2020 ? 18:23, Leon Fauster via CentOS <centos at centos.org> a > ?crit : > >> Am 03.04.20 um 18:01 schrieb Patrick DERWAEL: >>> Le ven. 3 avr. 2020 ? 17:54, Jonathan Billings <billings at negate.org> a >>> ?crit : >>> >>>> On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: >>>>> //192.168.1.200/mp3 /home/plex/Musique cifs >>>>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>>>> //192.168.1.200/videos /home/plex/Vid?os cifs >>>>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>>>> //192.168.1.200/series /home/plex/S?ries cifs >>>>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>>> Try removing non-ascii characters from your mountpoints and try again. >>>> >>>> -- >>>> Jonathan Billings <billings at negate.org> >>>> _______________________________________________ >>>> CentOS mailing list >>>> CentOS at centos.org >>>> https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.centos.org%2Fmailman%2Flistinfo%2Fcentos&data=02%7C01%7Cchristopher.schanzle%40nist.gov%7C50e5520598c94cdebfc708d7d7eefb64%7C2ab5d82fd8fa4797a93e054655c61dec%7C1%7C0%7C637215293735011190&sdata=jVoqTxBRGNNfP7%2BWZCRP%2Fbb5vQ9RdErHznttq5wkWH8%3D&reserved=0 >>>> >>> I have commented out the 2 mounts with non-ascii... that didn't help... >>> >>> >>> [root at plexvm ~]# cat /etc/fstab >>> >>> # >>> # /etc/fstab >>> # Created by anaconda on Fri Apr 3 14:02:23 2020 >>> # >>> # Accessible filesystems, by reference, are maintained under >> '/dev/disk/'. >>> # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more >> info. >>> # >>> # After editing this file, run 'systemctl daemon-reload' to update >> systemd >>> # units generated from this file. >>> # >>> /dev/mapper/cl_plexvm-root / xfs defaults >>> 0 0 >>> UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 >>> defaults 1 2 >>> /dev/mapper/cl_plexvm-swap swap swap defaults >>> 0 0 >>> //192.168.1.200/mp3 /home/plex/Musique cifs >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>> #//192.168.1.200/videos /home/plex/Vid?os cifs >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>> #//192.168.1.200/series /home/plex/S?ries cifs >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>> [root at plexvm ~]# mount -a >>> mount error(2): No such file or directory >>> Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) >>> [root at plexvm ~]# >>> >>> >> username=value >> password=value >> domain=value >> >> ? >> >> --Instead of user=, try username=.? mount.cifs(8) states: While some versions of the cifs kernel module accept user= as an abbreviation for this option, its use can confuse the standard mount program into thinking that this is a non-superuser mount. It is therefore recommended to use the full username= option name.
That was my initial setup before trying the abbreviations, but anyway: [root at plexvm ~]# nano /etc/fstab [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file, run 'systemctl daemon-reload' to update systemd # units generated from this file. # /dev/mapper/cl_plexvm-root / xfs defaults 0 0 UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 defaults 1 2 /dev/mapper/cl_plexvm-swap swap swap defaults 0 0 //192.168.1.200/mp3 /home/plex/Musique cifs username=plex,password=plex,domain=DERWAEL,ro,auto,vers=3.0 #//192.168.1.200/videos /home/plex/Vid?os cifs user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 #//192.168.1.200/series /home/plex/S?ries cifs user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 [root at plexvm ~]# systemctl daemon-reload [root at plexvm ~]# mount -a mount error(2): No such file or directory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) [root at plexvm ~]# Le ven. 3 avr. 2020 ? 18:55, Chris Schanzle <chris.schanzle at nist.gov> a ?crit :> On 4/3/20 12:48 PM, Patrick DERWAEL wrote: > > User & pass are present > > According to the man pages, workgroup is supported > > I have changed it to domain, but that didn't change a thing > > > > [root at plexvm ~]# cat /etc/fstab > > > > # > > # /etc/fstab > > # Created by anaconda on Fri Apr 3 14:02:23 2020 > > # > > # Accessible filesystems, by reference, are maintained under > '/dev/disk/'. > > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more > info. > > # > > # After editing this file, run 'systemctl daemon-reload' to update > systemd > > # units generated from this file. > > # > > /dev/mapper/cl_plexvm-root / xfs defaults > > 0 0 > > UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 > > defaults 1 2 > > /dev/mapper/cl_plexvm-swap swap swap defaults > > 0 0 > > //192.168.1.200/mp3 /home/plex/Musique cifs > > user=plex,pass=plex,domain=DERWAEL,ro,auto,vers=3.0 > > #//192.168.1.200/videos /home/plex/Vid?os cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > #//192.168.1.200/series /home/plex/S?ries cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > [root at plexvm ~]# systemctl daemon-reload > > [root at plexvm ~]# mount -a > > mount error(2): No such file or directory > > Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) > > [root at plexvm ~]# > > > > Le ven. 3 avr. 2020 ? 18:23, Leon Fauster via CentOS <centos at centos.org> > a > > ?crit : > > > >> Am 03.04.20 um 18:01 schrieb Patrick DERWAEL: > >>> Le ven. 3 avr. 2020 ? 17:54, Jonathan Billings <billings at negate.org> a > >>> ?crit : > >>> > >>>> On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: > >>>>> //192.168.1.200/mp3 /home/plex/Musique cifs > >>>>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>>>> //192.168.1.200/videos /home/plex/Vid?os cifs > >>>>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>>>> //192.168.1.200/series /home/plex/S?ries cifs > >>>>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>>> Try removing non-ascii characters from your mountpoints and try again. > >>>> > >>>> -- > >>>> Jonathan Billings <billings at negate.org> > >>>> _______________________________________________ > >>>> CentOS mailing list > >>>> CentOS at centos.org > >>>> > https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.centos.org%2Fmailman%2Flistinfo%2Fcentos&data=02%7C01%7Cchristopher.schanzle%40nist.gov%7C50e5520598c94cdebfc708d7d7eefb64%7C2ab5d82fd8fa4797a93e054655c61dec%7C1%7C0%7C637215293735011190&sdata=jVoqTxBRGNNfP7%2BWZCRP%2Fbb5vQ9RdErHznttq5wkWH8%3D&reserved=0 > >>>> > >>> I have commented out the 2 mounts with non-ascii... that didn't help... > >>> > >>> > >>> [root at plexvm ~]# cat /etc/fstab > >>> > >>> # > >>> # /etc/fstab > >>> # Created by anaconda on Fri Apr 3 14:02:23 2020 > >>> # > >>> # Accessible filesystems, by reference, are maintained under > >> '/dev/disk/'. > >>> # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more > >> info. > >>> # > >>> # After editing this file, run 'systemctl daemon-reload' to update > >> systemd > >>> # units generated from this file. > >>> # > >>> /dev/mapper/cl_plexvm-root / xfs defaults > >>> 0 0 > >>> UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot ext4 > >>> defaults 1 2 > >>> /dev/mapper/cl_plexvm-swap swap swap defaults > >>> 0 0 > >>> //192.168.1.200/mp3 /home/plex/Musique cifs > >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>> #//192.168.1.200/videos /home/plex/Vid?os cifs > >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>> #//192.168.1.200/series /home/plex/S?ries cifs > >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > >>> [root at plexvm ~]# mount -a > >>> mount error(2): No such file or directory > >>> Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) > >>> [root at plexvm ~]# > >>> > >>> > >> username=value > >> password=value > >> domain=value > >> > >> ? > >> > >> -- > > > Instead of user=, try username=. mount.cifs(8) states: > > While some versions of the cifs kernel module accept user= as an > abbreviation for this option, its use can confuse the standard mount > program into thinking that this is a non-superuser mount. It is therefore > recommended to use the full username= option name. > > >-- Patrick Derwael Rue de la fontaine, 3 4210 Burdinne T?l:+32.(0)479.80.50.79