thr3ads.net - asterisk users - [Asterisk-Users] Serious problem with z-plex 10 [Mar 2003]

If this information is useful, please help other people find it:
Share via:

Eris Riswanto

2003-Mar-31 17:12 UTC

[Asterisk-Users] Serious problem with z-plex 10

Hello

I have serious problem with zhone z-plex 10
the device sometimes get red alarm on some channel
and then the device suddenly shutdown.
I try to unplugged the power chord and plug again,
but the device still didn't up. I have to wait
for long time to get this device up again.
How can i fix this problem, so i can get this device
immediately?


Eris Riswanto

Steven Critchfield

2003-Mar-31 17:33 UTC

head link

[Asterisk-Users] Serious problem with z-plex 10

On Mon, 2003-03-31 at 18:12, Eris Riswanto wrote:> Hello
> 
> I have serious problem with zhone z-plex 10
> the device sometimes get red alarm on some channel
> and then the device suddenly shutdown.
> I try to unplugged the power chord and plug again,
> but the device still didn't up. I have to wait
> for long time to get this device up again.
> How can i fix this problem, so i can get this device
> immediately?
Do not plug in ethernet cable at all, even if the interface is down.

The long time to come up is due to the software being verified, and then
booted. It is that way on many channel banks.

Also it could mean the zplex is not happy with the line coding it is
getting. It is a very sensitive device and flakes out if it doesn't get
good signal. 
-- 
Steven Critchfield  <critch@basesys.com>

2003-Mar-31 20:26 UTC

head link

[Asterisk-Users] Serious problem with z-plex 10

If you can still login you can do
set2default
That will set it to factory defaults all your config info is now gone you
must re-provision
with all the slot nonsense
(the default user name is ?admin,? the default password is ?zhone?):
I have an old working config for a 24fxs zhone in format used by its tftp
loader
use at your own risk..

IF you't dont have a tftp server then grab one from here
http://www.jbmelectronics.com/tftp.htm
my old notes says...
after factory default config ..enter following cmds

#load new IP definition & enter ip/net mask
new ip-interface-record 1/1/1/0/ip
#save the ip config
update ip-interface-record 1/1/1/0/ip
#check it is correct
get ip-interface-record 1/1/1/0/ip
#connect to yout tftp server & load config from txt file
restore network <IP of your tftp server> zplexfxs.txt

I might have missed some thing that is obvious, :)

-----Original Message-----
From: Eris Riswanto <rizwanto@sdf.lonestar.org>
To: asterisk-users@lists.digium.com <asterisk-users@lists.digium.com>
Date: March 31, 2003 5:30 PM
Subject: Re: [Asterisk-Users] Serious problem with z-plex 10

>
>|Do not plug in ethernet cable at all, even if the interface is down.
>|
>|The long time to come up is due to the software being verified, and then
>|booted. It is that way on many channel banks.
>|
>|Also it could mean the zplex is not happy with the line coding it is
>|getting. It is a very sensitive device and flakes out if it doesn't get
>|good signal.
>|--
>|Steven Critchfield  <critch@basesys.com>
>|
>
>The ethernet port from the device doesn't even connected to network.
>But i did  configure the ethernet interface. I think the device
>mess up with the network configuration.
>How can i get back the device to original configuration?
>Anybody experienced with it, or any good idea to fix this problem?
>
>Thanks in advance
>
>Eris Riswanto
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part --------------
create if-translate  1/1/1/0/18
set ifindex = 1
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = ds1
set adminstatus = up
commit if-translate  1/1/1/0/18

create if-translate  1/1/2/0/18
set ifindex = 2
set shelf = 1
set slot = 1
set port = 2
set subport = 0
set type = ds1
set adminstatus = down
commit if-translate  1/1/2/0/18

create if-translate  1/1/1/0/102
set ifindex = 3
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/1/0/102

create if-translate  1/1/2/0/102
set ifindex = 4
set shelf = 1
set slot = 1
set port = 2
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/2/0/102

create if-translate  1/1/3/0/102
set ifindex = 5
set shelf = 1
set slot = 1
set port = 3
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/3/0/102

create if-translate  1/1/4/0/102
set ifindex = 6
set shelf = 1
set slot = 1
set port = 4
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/4/0/102

create if-translate  1/1/5/0/102
set ifindex = 7
set shelf = 1
set slot = 1
set port = 5
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/5/0/102

create if-translate  1/1/6/0/102
set ifindex = 8
set shelf = 1
set slot = 1
set port = 6
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/6/0/102

create if-translate  1/1/7/0/102
set ifindex = 9
set shelf = 1
set slot = 1
set port = 7
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/7/0/102

create if-translate  1/1/8/0/102
set ifindex = 10
set shelf = 1
set slot = 1
set port = 8
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/8/0/102

create if-translate  1/1/9/0/102
set ifindex = 11
set shelf = 1
set slot = 1
set port = 9
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/9/0/102

create if-translate  1/1/10/0/102
set ifindex = 12
set shelf = 1
set slot = 1
set port = 10
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/10/0/102

create if-translate  1/1/11/0/102
set ifindex = 13
set shelf = 1
set slot = 1
set port = 11
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/11/0/102

create if-translate  1/1/12/0/102
set ifindex = 14
set shelf = 1
set slot = 1
set port = 12
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/12/0/102

create if-translate  1/1/13/0/102
set ifindex = 15
set shelf = 1
set slot = 1
set port = 13
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/13/0/102

create if-translate  1/1/14/0/102
set ifindex = 16
set shelf = 1
set slot = 1
set port = 14
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/14/0/102

create if-translate  1/1/15/0/102
set ifindex = 17
set shelf = 1
set slot = 1
set port = 15
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/15/0/102

create if-translate  1/1/16/0/102
set ifindex = 18
set shelf = 1
set slot = 1
set port = 16
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/16/0/102

create if-translate  1/1/17/0/102
set ifindex = 19
set shelf = 1
set slot = 1
set port = 17
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/17/0/102

create if-translate  1/1/18/0/102
set ifindex = 20
set shelf = 1
set slot = 1
set port = 18
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/18/0/102

create if-translate  1/1/19/0/102
set ifindex = 21
set shelf = 1
set slot = 1
set port = 19
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/19/0/102

create if-translate  1/1/20/0/102
set ifindex = 22
set shelf = 1
set slot = 1
set port = 20
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/20/0/102

create if-translate  1/1/21/0/102
set ifindex = 23
set shelf = 1
set slot = 1
set port = 21
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/21/0/102

create if-translate  1/1/22/0/102
set ifindex = 24
set shelf = 1
set slot = 1
set port = 22
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/22/0/102

create if-translate  1/1/23/0/102
set ifindex = 25
set shelf = 1
set slot = 1
set port = 23
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/23/0/102

create if-translate  1/1/24/0/102
set ifindex = 26
set shelf = 1
set slot = 1
set port = 24
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate  1/1/24/0/102

create if-translate  1/1/1/0/6
set ifindex = 27
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = ethernetcsmacd
set adminstatus = up
commit if-translate  1/1/1/0/6

create if-translate  1/1/1/0/126
set ifindex = 28
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = ip
set adminstatus = up
commit if-translate  1/1/1/0/126

create analog-fxs-cfg-profile  1/1/1/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/1/0/102

create analog-fxs-cfg-profile  1/1/2/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/2/0/102

create analog-fxs-cfg-profile  1/1/3/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/3/0/102

create analog-fxs-cfg-profile  1/1/4/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/4/0/102

create analog-fxs-cfg-profile  1/1/5/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/5/0/102

create analog-fxs-cfg-profile  1/1/6/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/6/0/102

create analog-fxs-cfg-profile  1/1/7/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/7/0/102

create analog-fxs-cfg-profile  1/1/8/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/8/0/102

create analog-fxs-cfg-profile  1/1/9/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/9/0/102

create analog-fxs-cfg-profile  1/1/10/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/10/0/102

create analog-fxs-cfg-profile  1/1/11/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/11/0/102

create analog-fxs-cfg-profile  1/1/12/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/12/0/102

create analog-fxs-cfg-profile  1/1/13/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/13/0/102

create analog-fxs-cfg-profile  1/1/14/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/14/0/102

create analog-fxs-cfg-profile  1/1/15/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/15/0/102

create analog-fxs-cfg-profile  1/1/16/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/16/0/102

create analog-fxs-cfg-profile  1/1/17/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/17/0/102

create analog-fxs-cfg-profile  1/1/18/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/18/0/102

create analog-fxs-cfg-profile  1/1/19/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/19/0/102

create analog-fxs-cfg-profile  1/1/20/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/20/0/102

create analog-fxs-cfg-profile  1/1/21/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/21/0/102

create analog-fxs-cfg-profile  1/1/22/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/22/0/102

create analog-fxs-cfg-profile  1/1/23/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/23/0/102

create analog-fxs-cfg-profile  1/1/24/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile  1/1/24/0/102

create analog-if-cfg-profile  1/1/1/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/1/0/102

create analog-if-cfg-profile  1/1/2/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/2/0/102

create analog-if-cfg-profile  1/1/3/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/3/0/102

create analog-if-cfg-profile  1/1/4/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/4/0/102

create analog-if-cfg-profile  1/1/5/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/5/0/102

create analog-if-cfg-profile  1/1/6/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/6/0/102

create analog-if-cfg-profile  1/1/7/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/7/0/102

create analog-if-cfg-profile  1/1/8/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/8/0/102

create analog-if-cfg-profile  1/1/9/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/9/0/102

create analog-if-cfg-profile  1/1/10/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/10/0/102

create analog-if-cfg-profile  1/1/11/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/11/0/102

create analog-if-cfg-profile  1/1/12/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/12/0/102

create analog-if-cfg-profile  1/1/13/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/13/0/102

create analog-if-cfg-profile  1/1/14/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/14/0/102

create analog-if-cfg-profile  1/1/15/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/15/0/102

create analog-if-cfg-profile  1/1/16/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/16/0/102

create analog-if-cfg-profile  1/1/17/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/17/0/102

create analog-if-cfg-profile  1/1/18/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/18/0/102

create analog-if-cfg-profile  1/1/19/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/19/0/102

create analog-if-cfg-profile  1/1/20/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/20/0/102

create analog-if-cfg-profile  1/1/21/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/21/0/102

create analog-if-cfg-profile  1/1/22/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/22/0/102

create analog-if-cfg-profile  1/1/23/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/23/0/102

create analog-if-cfg-profile  1/1/24/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile  1/1/24/0/102

create ds1  1/1/1/0/18
set line-type = esf
set line-code = b8zs
set send-code = sendnocode
set circuit-id = ds1
set loopback-config = noloop
set signal-mode = none
set transmit-clock-source = looptiming
set fdl = fdlnone
set dsx-line-length = dsx0
set line-status-change-trap-enable = disabled
set channelization = disabled
set ds1-mode = csu
set csu-line-length = csu00
set clock-source-eligible = eligible
commit ds1  1/1/1/0/18

create ds1  1/1/2/0/18
set line-type = esf
set line-code = b8zs
set send-code = sendnocode
set circuit-id = ds1
set loopback-config = noloop
set signal-mode = none
set transmit-clock-source = looptiming
set fdl = fdlnone
set dsx-line-length = dsx0
set line-status-change-trap-enable = disabled
set channelization = disabled
set ds1-mode = csu
set csu-line-length = csu00
set clock-source-eligible = noteligible
commit ds1  1/1/2/0/18

create ether  27
set autonegstatus = enabled
set mauType = mau100basetxfd
set restart = norestart
set ifType = mau100basetxfd
set autonegcap = b100baseTFD
set remotefault = noerror
commit ether  27

create if-default  0/126/6
set cardtype = 0
set upperiftype = ip
set loweriftype = ethernetcsmacd
set numunits = 1
set adminStatus = up
commit if-default  0/126/6

create if-default  0/6/0
set cardtype = 0
set upperiftype = ethernetcsmacd
set loweriftype = NONE(0)
set numunits = 1
set adminStatus = up
commit if-default  0/6/0

create if-default  0/126/159
set cardtype = 0
set upperiftype = ip
set loweriftype = rfc1483
set numunits = 1
set adminStatus = up
commit if-default  0/126/159

create if-default  0/159/49
set cardtype = 0
set upperiftype = rfc1483
set loweriftype = aal5
set numunits = 1
set adminStatus = up
commit if-default  0/159/49

create if-default  0/49/168
set cardtype = 0
set upperiftype = aal5
set loweriftype = hdsl2
set numunits = 1
set adminStatus = up
commit if-default  0/49/168

create if-default  0/168/0
set cardtype = 0
set upperiftype = hdsl2
set loweriftype = NONE(0)
set numunits = 1
set adminStatus = up
commit if-default  0/168/0

create if-default  0/37/0
set cardtype = 0
set upperiftype = atm
set loweriftype = NONE(0)
set numunits = 1
set adminStatus = up
commit if-default  0/37/0

create if-next-index  1/1/1/0/18
set nextifindex = 34
commit if-next-index  1/1/1/0/18

create if-stack  28/27
set upperlayer = 28
set lowerlayer = 27
commit if-stack  28/27

create ip-interface-record  1/1/1/0/126
set lgid = 0
set vpi = 0
set vci = 0
set rdindex = 0
set dhcp = none
set addr = 192.168.1.250
set netmask = 255.255.255.0
set bcastaddr = 0.0.0.0
set destaddr = 0.0.0.0
set farendaddr = 0.0.0.0
set mru = 0
set reasmmaxsize = 0
set ingressfiltername = ""
set egressfiltername = ""
set pointtopoint = no
set mcastenabled = yes
set ipfwdenabled = yes
set mcastfwdenabled = yes
set natenabled = no
set bcastenabled = yes
commit ip-interface-record  1/1/1/0/126

create line-group  1
set group-id = 1
set group-name = ""
set primary-name = 1
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  1

create line-group  2
set group-id = 2
set group-name = ""
set primary-name = 2
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = down
commit line-group  2

create line-group  3
set group-id = 3
set group-name = ""
set primary-name = 3
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  3

create line-group  4
set group-id = 4
set group-name = ""
set primary-name = 4
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  4

create line-group  5
set group-id = 5
set group-name = ""
set primary-name = 5
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  5

create line-group  6
set group-id = 6
set group-name = ""
set primary-name = 6
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  6

create line-group  7
set group-id = 7
set group-name = ""
set primary-name = 7
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  7

create line-group  8
set group-id = 8
set group-name = ""
set primary-name = 8
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  8

create line-group  9
set group-id = 9
set group-name = ""
set primary-name = 9
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  9

create line-group  10
set group-id = 10
set group-name = ""
set primary-name = 10
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  10

create line-group  11
set group-id = 11
set group-name = ""
set primary-name = 11
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  11

create line-group  12
set group-id = 12
set group-name = ""
set primary-name = 12
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  12

create line-group  13
set group-id = 13
set group-name = ""
set primary-name = 13
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  13

create line-group  14
set group-id = 14
set group-name = ""
set primary-name = 14
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  14

create line-group  15
set group-id = 15
set group-name = ""
set primary-name = 15
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  15

create line-group  16
set group-id = 16
set group-name = ""
set primary-name = 16
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  16

create line-group  17
set group-id = 17
set group-name = ""
set primary-name = 17
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  17

create line-group  18
set group-id = 18
set group-name = ""
set primary-name = 18
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  18

create line-group  19
set group-id = 19
set group-name = ""
set primary-name = 19
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  19

create line-group  20
set group-id = 20
set group-name = ""
set primary-name = 20
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  20

create line-group  21
set group-id = 21
set group-name = ""
set primary-name = 21
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  21

create line-group  22
set group-id = 22
set group-name = ""
set primary-name = 22
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  22

create line-group  23
set group-id = 23
set group-name = ""
set primary-name = 23
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  23

create line-group  24
set group-id = 24
set group-name = ""
set primary-name = 24
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  24

create line-group  25
set group-id = 25
set group-name = ""
set primary-name = 25
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  25

create line-group  26
set group-id = 26
set group-name = ""
set primary-name = 26
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  26

create line-group  27
set group-id = 27
set group-name = ""
set primary-name = 27
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group  27

create line-profile  1/1/1/0/18
set profile-name = "Ds1 default line profile"
set shelf = 1
set slot = 1
set port = 1
set subPort = 0
set line-group-name = 1
commit line-profile  1/1/1/0/18

create line-profile  1/1/2/0/18
set profile-name = "Ds1 default line profile"
set shelf = 1
set slot = 1
set port = 2
set subPort = 0
set line-group-name = 2
commit line-profile  1/1/2/0/18

create line-profile  1/1/1/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 1
set subPort = 0
set line-group-name = 3
commit line-profile  1/1/1/0/102

create line-profile  1/1/2/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 2
set subPort = 0
set line-group-name = 4
commit line-profile  1/1/2/0/102

create line-profile  1/1/3/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 3
set subPort = 0
set line-group-name = 5
commit line-profile  1/1/3/0/102

create line-profile  1/1/4/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 4
set subPort = 0
set line-group-name = 6
commit line-profile  1/1/4/0/102

create line-profile  1/1/5/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 5
set subPort = 0
set line-group-name = 7
commit line-profile  1/1/5/0/102

create line-profile  1/1/6/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 6
set subPort = 0
set line-group-name = 8
commit line-profile  1/1/6/0/102

create line-profile  1/1/7/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 7
set subPort = 0
set line-group-name = 9
commit line-profile  1/1/7/0/102

create line-profile  1/1/8/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 8
set subPort = 0
set line-group-name = 10
commit line-profile  1/1/8/0/102

create line-profile  1/1/9/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 9
set subPort = 0
set line-group-name = 11
commit line-profile  1/1/9/0/102

create line-profile  1/1/10/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 10
set subPort = 0
set line-group-name = 12
commit line-profile  1/1/10/0/102

create line-profile  1/1/11/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 11
set subPort = 0
set line-group-name = 13
commit line-profile  1/1/11/0/102

create line-profile  1/1/12/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 12
set subPort = 0
set line-group-name = 14
commit line-profile  1/1/12/0/102

create line-profile  1/1/13/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 13
set subPort = 0
set line-group-name = 15
commit line-profile  1/1/13/0/102

create line-profile  1/1/14/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 14
set subPort = 0
set line-group-name = 16
commit line-profile  1/1/14/0/102

create line-profile  1/1/15/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 15
set subPort = 0
set line-group-name = 17
commit line-profile  1/1/15/0/102

create line-profile  1/1/16/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 16
set subPort = 0
set line-group-name = 18
commit line-profile  1/1/16/0/102

create line-profile  1/1/17/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 17
set subPort = 0
set line-group-name = 19
commit line-profile  1/1/17/0/102

create line-profile  1/1/18/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 18
set subPort = 0
set line-group-name = 20
commit line-profile  1/1/18/0/102

create line-profile  1/1/19/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 19
set subPort = 0
set line-group-name = 21
commit line-profile  1/1/19/0/102

create line-profile  1/1/20/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 20
set subPort = 0
set line-group-name = 22
commit line-profile  1/1/20/0/102

create line-profile  1/1/21/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 21
set subPort = 0
set line-group-name = 23
commit line-profile  1/1/21/0/102

create line-profile  1/1/22/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 22
set subPort = 0
set line-group-name = 24
commit line-profile  1/1/22/0/102

create line-profile  1/1/23/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 23
set subPort = 0
set line-group-name = 25
commit line-profile  1/1/23/0/102

create line-profile  1/1/24/0/102
set profile-name = "default line profile               "
set shelf = 1
set slot = 1
set port = 24
set subPort = 0
set line-group-name = 26
commit line-profile  1/1/24/0/102

create line-profile  1/1/1/0/6
set profile-name = "default line profile"
set shelf = 1
set slot = 1
set port = 1
set subPort = 0
set line-group-name = 27
commit line-profile  1/1/1/0/6

create physical-to-ifindex  1/1/1/0
set ifindex = 27
commit physical-to-ifindex  1/1/1/0

create rip-if-config  0/192/168/1/250
set auth-type = none
set auth-key = ""
set send-type = donotsend
set receive-type = donotreceive
set default-metric = 0
set src-address = -1062731270
set sroute-advertise = none
set poison = disabled
commit rip-if-config  0/192/168/1/250

create system  0
set syscontact = ""
set sysname = ""
set syslocation = ""
set enableauthtraps = NONE(0)
set setserialno = 0
set zmsexists = false
set zmsconnectionstatus = inactive
set zmsipaddress = 0.0.0.0
set configsyncexists = NONE(0)
set configsyncoverflow = NONE(0)
set configsyncpriority = low
set configsyncaction = NONE(0)
set configsyncfilename = ""
set configsyncstatus = NONE(0)
set configsyncuser = ""
set configsyncpasswd = ""
set numshelves = 0
set shelvesarray = ""
set numcards = 0
set ipaddress = 0.0.0.0
set alternateipaddress = 0.0.0.0
commit system  0

create tdm-xcon  1/1
set xcon-type = voice
set xcon-to-port-group-id = 3
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/1

create tdm-xcon  1/2
set xcon-type = voice
set xcon-to-port-group-id = 4
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/2

create tdm-xcon  1/3
set xcon-type = voice
set xcon-to-port-group-id = 5
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/3

create tdm-xcon  1/4
set xcon-type = voice
set xcon-to-port-group-id = 6
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/4

create tdm-xcon  1/5
set xcon-type = voice
set xcon-to-port-group-id = 7
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/5

create tdm-xcon  1/6
set xcon-type = voice
set xcon-to-port-group-id = 8
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/6

create tdm-xcon  1/7
set xcon-type = voice
set xcon-to-port-group-id = 9
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/7

create tdm-xcon  1/8
set xcon-type = voice
set xcon-to-port-group-id = 10
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/8

create tdm-xcon  1/9
set xcon-type = voice
set xcon-to-port-group-id = 11
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/9

create tdm-xcon  1/10
set xcon-type = voice
set xcon-to-port-group-id = 12
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/10

create tdm-xcon  1/11
set xcon-type = voice
set xcon-to-port-group-id = 13
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/11

create tdm-xcon  1/12
set xcon-type = voice
set xcon-to-port-group-id = 14
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/12

create tdm-xcon  1/13
set xcon-type = voice
set xcon-to-port-group-id = 15
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/13

create tdm-xcon  1/14
set xcon-type = voice
set xcon-to-port-group-id = 16
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/14

create tdm-xcon  1/15
set xcon-type = voice
set xcon-to-port-group-id = 17
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/15

create tdm-xcon  1/16
set xcon-type = voice
set xcon-to-port-group-id = 18
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/16

create tdm-xcon  1/17
set xcon-type = voice
set xcon-to-port-group-id = 19
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/17

create tdm-xcon  1/18
set xcon-type = voice
set xcon-to-port-group-id = 20
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/18

create tdm-xcon  1/19
set xcon-type = voice
set xcon-to-port-group-id = 21
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/19

create tdm-xcon  1/20
set xcon-type = voice
set xcon-to-port-group-id = 22
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/20

create tdm-xcon  1/21
set xcon-type = voice
set xcon-to-port-group-id = 23
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/21

create tdm-xcon  1/22
set xcon-type = voice
set xcon-to-port-group-id = 24
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/22

create tdm-xcon  1/23
set xcon-type = voice
set xcon-to-port-group-id = 25
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/23

create tdm-xcon  1/24
set xcon-type = voice
set xcon-to-port-group-id = 26
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon  1/24
create user-profile  0
set user-id = 0
set user-name = USER_SEED_REC
set user-pass = NOT_A_USER
set user-prompt = 10
set admin-access = 0
set debug-access = 0
set voice-access = 0
set data-access = 0
set manuf-access = 0
set database-access = 0
set system-access = 0
set tools-access = 0
set user-admin-access = 0
set zhone-access = 0
commit user-profile  0

create user-profile  1
set user-id = 1
set user-name = zhonedevel
set user-pass = zeebbSdSd
set user-prompt = zSH>
set admin-access = 1
set debug-access = 1
set voice-access = 1
set data-access = 1
set manuf-access = 1
set database-access = 1
set system-access = 1
set tools-access = 1
set user-admin-access = 1
set zhone-access = 1
commit user-profile  1

create user-profile  2
set user-id = 2
set user-name = admin
set user-pass = Sedyzybceb
set user-prompt = zSH>
set admin-access = 1
set debug-access = 0
set voice-access = 1
set data-access = 1
set manuf-access = 1
set database-access = 1
set system-access = 1
set tools-access = 1
set user-admin-access = 1
set zhone-access = 0
commit user-profile  2

Possibly Parallel Threads

Search for more possibly parallel threads

asterisk users - Mar 2003 - Serious problem with z-plex 10

[Asterisk-Users] Serious problem with z-plex 10

[Asterisk-Users] Serious problem with z-plex 10

[Asterisk-Users] Serious problem with z-plex 10

Possibly Parallel Threads