similar to: BudgeTone-102 MWI&CID with Asterisk

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

I've looked through the archives - and see questions similar to mine, but no answers. What, if anything, can be done to get the incoming Caller ID to be presented on the Budgetone's Caller ID display? In all other respects the phone+Asterisk seem to be extremely happy with each other.

Hi, Just playing with a couple of Budgetone 102 phones and they are pretty good for the price. The only problem i'm having at the moment is when I get a voicemail on the Asterisk box the LCD flashes. Dialing *98 goes to the VoiceMail Manager, and asks for mailbox, I enter 201, then asks for password, enter my voicemail password set in the Extensions -> webadmin, then hit the

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

I have the MusicOnHold feature working great when called from ATA-186 extensions. It's pretty cool. However, when I call from a BudgeTone-100 phone, no music is heard -- instead it continues the ringing feedback and acts like the call is unanswered. At the same time, I can call from (multiple) ATA-186 extensions and hear music as long as I like. How can I debug this? As far as I can tell,

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

I'm using 1 BudgeTone 100 IP Phone and a Sipura 2000 for all my old analog phones. The analog phones with the Sipura seem to work great. Voice quality is fine on both ends on the Sipura. I'm using the Teliax service and I use the Ulaw codec for all phones. However, I'm struggling with the BudgeTone 100. On my end, I find there is lot's of voice cut outs. I'm told my

Just for the record and to possibly help with others who get BudgeTone phones. My asterisk box is behind NAT, and I use Vonage, NuFone, and iconnecthere for my "POTS backhaul." On the front end I have an ATA186, a Digium TDM20, and now a BudgeTone 102. The BudgeTone definitely has issues wrt the RTP stream and NATting, although unfortunately I haven't yet been able to dig

I have a client using a Grandstream Budgetone 102, but he is unable to register to my Asterisk server. About every 20 seconds, I get the following messages: Aug 11 11:27:17 DEBUG[1087740720]: chan_sip.c:748 __sip_autodestruct: Auto destroying call '3b4b68ec48200ab9@192.168.xxx.xxx' Aug 11 11:27:19 NOTICE[1087740720]: chan_sip.c:7336 handle_request: Registration from

Hello to all. I have a couple of budgetones connected to Asterisk server. I can establish calls using budgetone with no problem, but when I hang up a Budgetone, Asterisk does not detect the hangup. It seems that the communication goes on in spite of budgetone's hangup. My sip.conf: [general] disallow=all allow=ulaw bindaddr=172.16.60.21 [sip1] callgroup=1 pickupgroup=1 type=friend

I have a couple of Budgetones that I am playing with trying to get them to work with * from a remote network over the Internet (yes NAT joy!). My * server is in my DMZ and I have 5060 and my RTP range forwarded (UDP) to my public address (through a Cisco PIX). Internally, I can setup my budgetone, it registers and works great. I then have a Linksys router connected to another Internet

I'm looking to purchase and deploy a bunch of hardphones for agent use. The phones will have to register with Asterisk and/or SER, depending on where the phones go. They need only one line, G729 codec, and no super fancy features. Preferrably something that is easy to provision. I would think the BudgeTone would be good, but then I've read so many people complaining about them, and some

Hi again. I cant get my Budgetone registered in Asterisk, and I cant find what's wrong... uff. This is my config: This fragment is from my sip.conf: [12345] type=user user=12345 username=12345 secret=12345 authuser=12345 qualify=1000 nat=no host=dynamic dtmfmode=rfc2833 reinvite=no canreinvite=no disallow=all allow=g729 allow=ulaw allow=alaw context=sip_default And this is from my

Just to toss in my very limited experiences with the Grandstream phone-- I haven't tested it enough to really know nor is my Asterisk config set up enough to fully try all the features. Mostly, it just works. It was very easy to configure and get running. I've been toting it around to clients as a show and tell exhibit and it has helped get people excited about the possibilities. Voice

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

Everytime that I make a call to a Budgetone 101 phone. I always see the following: -- Executing Dial("SIP/1001-bac5", "SIP/1000|20|tT") in new stack -- Called 1000 -- Got SIP response 302 "Moved Temporarily" back from 172.22.5.4 -- SIP/1000-465e is busy I can use X-Lite all the time to make a call without a problem, but any of the budgetone 101 phones

I've been looking at how our budgetone's have been failing and have found the following: A quick layout -- Latest CVS as of tonight. Sip phone behind NAT. * server with public IP address. -------from sip.conf for my phone: [1747xxxxxxx] username=xxxxx secret=xxxxx host=dynamic type=friend nat=yes ------- -------from the * log messages Nov 6 01:50:07 DEBUG[4101]: File chan_sip.c,

Hi All I have 3 GrandStream BudgeTone-100's which connect to an * box with a HFC-S based ISDN card using ISDN4Linux. I have setup the BudgeTone-100's to use Early Dial which for calling between the three phones works well, but for the external calls using the following extension exten => _9.,1,Dial(Modem/g1:${EXTEN:1}) Only the first digit is dial on the ISDN Line. Does anyone know of

I have two problems with Asterisk and my Budgetone 100s. 1. Sometimes when outside callers dial my Budgetone it will ring twice, then the caller will receive a busy signal. This happens intermittently and I cannot pin down the circumstances of when it works and when it doesn't. Asterisk logging doesn't give me too much info when this happens: *CLI> -- Executing