similar to: X100P Config

Hi, I have got one X100P telephone card in my Asterisk server and it's working well. I have two phones lines and would like to install a second card so I can use both lines. I have installed the card and tried to set it up, but all to no avail ! Could someone outline the changes that I need to make (and in which .conf files) in order to get the second card going ? Thanks in advance,

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

Does anyone know if you can put two of the X100P cards in to the same machine and have access to two landlines ? I just need to know if it's worth buying two or not ! Thanks, Paul. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040410/2608a3fd/attachment.htm

Digium X100P / new cards are is available on ebay for $43. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309 <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309 > Hope this helps to who want to play with X100P! Are these being sold by Digium ? I don't know ?? - SamW -------------- next part -------------- An HTML

Hi to all the * people out there, Please kind to me as I am both new to Asterisk and to Linux - But I am learning fast. My config is quite simple, I'm just following examples and the Wiki: I have two PC's running X-Lite phones, these work without problems between each other, and I have a GS BudgeTone-100 registered to Free World Dial UP (working no problem). I have tried to

Hi, Does anyone know where I can get a telephone card that will fit into the PCI slot on my PC and work with the UK telephone system (BT) ? I would really like the retailer to be based in the UK if at all possible ? Also, is there any way to set up asterisk so that only certain phones can make external calls, but all phones can receive incoming calls if they are routed to that phones by some

Hi, When I installed my X100P card there was a two ring delay before the phone started to ring. I managed to solve that by stopping the Caller Line ID being passed to the phone. I'm in the UK so that doesn't matter anyway. The problem that I have now is that when a call comes in on the external phone line and it is answered by a standard phone (not connected to Asterisk), the IP

What can I do because my X100P don´t answer sometimes. I put these parameters in the zapata.conf, but sometimes my X100P don´t answer. usedistinctiveringdetection=yes dring1=363,137,0 dring1context=incoming2 Any sugestion? Thank´s --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! -------------- next part -------------- An HTML attachment

Hello. You can't have two phones login with the same extension. You need to assign one phone to 101, and the other to 102. Set the user to 101 on one and 102 on the other. -Brian On Feb 11, 8:07am, "Juki" wrote: } Subject: [Asterisk-bsd] Asterisk not accepting multiple SIP phone logins } Hi all, } } I have Asterisk running on FreeBSD 4.x and I have made configurations to }

Hello all, I have a question. I have an asterisk box setup with an x100p card installed. I have about 3 VoIP phones connected to it. The x100p is connected to my pots line. I also have regular phones connected the the pots line as well like most normal people would. When I get an incomming call all the regular phones ring and my VoIP phones ring. This is good. My question is this. Say

I have an Asterisk 0.4.0 install working with two grandstream budgetone 100 phones, gnophone, and kphone. This is a private network segment (172.17.x.x), with the PBX configured on my outbound firewall which has a public address (66.x.x.x). - I can make calls between phones - all extensions are working. - I can make IAX calls to IAXTEL. No problems (apparently gsm only) - I can call SIP phone

I'm having sporadic problems with my X100P card. When trying trying to call out I get a message on the console that the channel is busy even though I have bounced asterisk. It seems the card grabs the line and doesn't let go. When I try to call the number I get a busy signal. If I perform a rmmod wcfxo and restart asterisk everything retruns to normal. I have a TDP400P installed along with

Hi, I have just upgraded my Cisco 7960 phone to SIP firmware today and I have to say it's working great with Asterisk. At work (which uses Cisco Call Manager), when a voicemail is recieved the read light remains lit until the voicemail is retrieved. Is there any way to achieve the same effect with Asterisk ? Thanks, Paul. -------------- next part -------------- An HTML attachment was

I'm looking to get an x100p off ebay and am not particularly familar with the "life cycle" of the card.. An "Authentic X100P" listing has a buy it now of $29.95 and says There are 3 types of cards Asterisk would recognize: *Screenshots from the official, original driver install Cheap "OEM X100P","Clones", "Compatibles", Knock-Offs

Hi I thought this might be of general interest. Recently I purchased an X100P from a Digium reseller in the UK. Very pleased with the card; works perfectly. My friend (known for his deep pockets and short arms) purchased an X100P card from Ebay. He's had no end of problems with line noise, dropped called etc so I thought I would compare the two cards. Plus mine was delivered within two

Hi All... I have installed a single X100P card in my PC and am playing with Asterisk. The wire I plugged into the X100P has two POTS lines on it, wired on the RJ45 in the normal way. I am getting odd behavior. It seems when I dial out that the X100P dials both lines at the same time. I have two questions. First, I see that the X100P is only a single channel. Does this mean that I can

Hi all. I`ve installed a X100P on my box and is working well with incoming and outgoing calls as a trunk with one PTSN line. I want to connect the X100P to my Panasonic 616 EASA-PHONE as an internal extension to permit to users to make calls to SIP devices from analog phones, the problem is when I dial the ext number where the X100P is connected I get busy tone. What config I need to change to

Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect standard analog line to the card

Hello, Can the wildcard x100P be bought of the shelf in stores - say in Singapore. Thanks Varun

Hello, I have X100P card but exten => _9X.,1,Dial(Zap/1/${EXTEN:1}) does not work. The error is app_dial.c:803 dial_exec: Unable to create channel of type 'Zap' (cause 0) Zap show channel, lspci etc show everything is normal. Because X100P is Intel 537 modem, so can I use it as true modem for test? Did any one use X100P as a modem? Thank you very much. -------------- next part